Conference Abstracts

Abstract

The demand on fresh water has increased to such an extend that supply cannot keep up with demand, especially in areas where desalination of seawater is not an option. There is a large gap between the water user, the water supplier and the capacity of the resource/s. The water user sees it as his/her right to be provided with clean water in sufficient volumes to sustain their most basic needs.At the same time people want higher levels of service, especially where sanitation is concerned. The recent droughts in Cape Town and in Port Elizabeth have put significant focus on groundwater and we've seen uncontrolled drilling for groundwater reaching new heights, which is a problem on its own. We can no longer afford not to bring the groundwater user into the water planning cycle, so that the users, on all levels of society, can be educated to understand that the quantity and quality of fresh water (ground -and surface water) is limited and dependent on recharge from rainfall, size of the catchment, topography and all that takes place on the surface. This education must be specific to a target audience and must take into account the existing knowledge and understanding of the user profile. As an example, a case study will be discussed where there are large groundwater users operating within the upper parts of a catchment, followed by municipal abstractions and private abstractions within the central parts of the same catchment. Four profiles of users are therefore present: (1) large-scale irrigation by farmers, (2) large-scale municipal abstractions, (3) private residents and (4) formal / informal settlements, with the latter probably competing for top pot in terms of water use, with the irrigation. They key deliverable of the presentation / paper will be to (1) make people aware of the problem/challenge, and (2) suggest ways to bridge gaps and get all users and service providers to work together to save water and to understand that there are limits to the quantities available.

Abstract

A new mining site situated near Kolwezi in the Democratic Republic of the Congo plans to develop a pit in phases over a period of six years. The mine requires dewatering volume estimates of the pit as well as a constant water supply to the plant. Hydrogeologic data available at the site during the scoping phase was limited to a few water level measurements and blowout yields from only five hydrological boreholes. Hydraulic properties from reports at neighbouring sites were extrapolated to the geological units at the site. The depth to water level at the site is about 20 m, with a planned final pit depth of approximately 180 m below surface.

Based on the limited data available an analytical approach to estimate the inflow into the mine was adopted. Analytical calculations proposed by Marinelli and Niccoli (2000) were used to estimate the inflow into the Pumpi mine pits. The analytical calculations consider recharge, depth of mining vertical and horizontal hydraulic conductivities. Drawdown evolution of pit dewatering are obtained by using different mining depths at different mine stages. The output results from the analytical calculations are the maximum extent of influence of the pit as well as the volume of water inflow into the pit. Limitations of the analytical equations are that they, amongst others, cannot consider complex boundaries.

Drilling and pump testing to obtain local hydraulic properties and boundary conditions are planned during the first quarter of 2013. The numerical model will be set up after the drilling and pumping tests, using the new data for calibration. The numerical model will contain as much of the physical layer definitions and potential internal boundaries as possible with model boundaries incorporated along  far  field  fault  zones  and  hydraulic  boundaries.  The  numerical model  should  improve the reliability of estimates of pit inflow and water supply to the plant.

The results between the analytical and numerical approaches can then be compared to improve future dewatering estimates with limited data. It is expected that the reliability of the analytical predictions will reduce after year 4, where the role of boundaries are expected to influence the drawdowns and related flow towards the pit.

Abstract

Estimating groundwater recharge response from rainfall remains a major challenge especially in arid and semi-arid areas where recharge is difficult to quantify because of uncertainties of hydraulic parameters and lack of historical data. In this study, Chloride Mass Balance (CMB) method and Extended model for Aquifer Recharge and soil moisture Transport through unsaturated Hardrock (EARTH) model were used to estimate groundwater recharge rates. Groundwater chemistry data was acquired from the Department of Water and Sanitation (DWS) and Global Project Management consultants, while groundwater samples were collected to fill-in the identified gaps. These were sent to Council for Geoscience laboratory for geochemical analysis. Rainfall samples were also collected and sent for geochemical analysis. An average value of rainfall chloride concentration, average groundwater chloride concentration and mean annual precipitation (MAP) were used to estimate recharge rate at a regional scale. Local scale recharge was also calculated using chloride concentration at each borehole. The results were integrated in ArcGIS software to develop a recharge distribution map of the entire area. For EARTH model, long term rainfall and groundwater levels data were acquired from the South Africa Weather Services and DWS, respectively. Soil samples were collected at selected sites and analysed. These were used to determine representative values of specific yield to use on EARTH model. 60% of the groundwater levels data for 5 boreholes was used for model calibration while the remaining 40% was used for model validation. The model performance was evaluated using coefficient of determination (R2), correlation coefficient (R), Root Mean Square Error (RMSE) and Mean square error (MSE). Regional recharge rates of 12.1 mm/a (equivalent to 1.84% of 656 mm/a MAP) and 30.1 mm/a (equivalent to 4.6% MAP) were calculated using rainfall chloride concentrations of 0.36 and 0.9 mg/L, respectively. The estimated local recharge rates ranged from 0.9-30.2 mm/a (0.14 - 4.6%) and 2 - 75 mm/a (0.3 - 11.4%) using chloride concentration of 0.9 and 0.36 mg/L, respectively. The average recharge rate estimated using EARTH model is 6.12% of the MAP (40.1 mm/a). CMB results were found to fall within the same range with those obtained in other studies within the vicinity of the study area. The results of EARTH model and CMB method were comparable. The computed R2, R, RMSE and MSE ranged from 0.47-0.87, 0.68-0.94, 0.04-0.34, 0.16-3.16, and 0.50-0.79, 0.68-0.89, 0.07-0.68, 0.15-8.78 for calibration and validation, respectively. This showed reasonable and acceptable model performance. The study found that there is poor response of groundwater levels during rainy season which is likely to be due to lack of preferential flows between surface water and groundwater systems. This has resulted in poor relationship between estimated and observed groundwater levels during rainfall season.

Key words: ArcGIS, CMB, EARTH, Groundwater recharge, rainfall

Abstract

As part of supporting the National Development Plan (NDP) vision 2030, Council for Geoscience has been tasked by the Department of Mineral Resources to embark on an integrated and multidisciplinary geoscience mapping programme to systematically map South Africa in a more detail manner. With the idea of groundwater resource development and preservation purposes, a 1:100 000 geohydrological map, explanatory booklet, geohydrological data base for all data obtained from various sources and an ISO document was produced. The map is situated in the middle reach of Kuruman River and covers an area of 2750 km2. Mapping process commenced by sorting existing geological and hydrogeological data sourced from the Council for Geoscience database, Department of Water and Sanitation, Department of Agriculture and Kuruman municipalities. The process also includes filling identified gaps through extensive hydrocensus which entailed site surveying, hydrocensus, measuring and groundwater sampling, determination and demarcating of groundwater units, legend standardization and GIS cartography. Different aquifer types were categorised by analysing factors which control groundwater occurrence in the area; these factors includes lithostratigraphy, groundwater quantity, geological and linear structures. These were later used as datasets in Arc GIS for map processing. Before being used to determine aquifer media and geohydrological boundary conditions, these factors were closely studied through different approaches by interpreting geological and remotely-sensed data, field verification and survey of historical information. Four aquifer types were identified, namely; Intergranular aquifer covering an area of 152.9 km2; Intergranular and fractured aquifer which covers 696.4 km2 area; Fractured aquifer which covers an approximate area of 408.5 km2 and Fractured karst aquifer with a total size of 1486.1 km2. The insert groundwater quality map show completely unfit water (Class 4) for use in the central and south-eastern side of the map. Electrical conductivity in most parts of the map fall within recommended operational limit.

Abstract

This study was focused on estimating groundwater recharge response from rainfall events in a semi-arid fractured aquifer. Determination of response of the groundwater recharge from rainfall is important as it directly affects the available groundwater in an aquifer. Groundwater level data was used to evaluate the response of groundwater recharge from rainfall events using Extended model for Aquifer Recharge and soil moisture Transport through unsaturated Hard rock (EARTH) model. Chloride Mass Balance (CMB) method was also used to estimate groundwater recharge in quaternary catchment A91H. Chloride concentration from groundwater and precipitation in the catchment were collected and analysed. Calculated local recharge using CMB method was interpolated in ARCGIS to generate groundwater recharge distribution maps of the quaternary catchment. The estimated local recharge rates using CMB method ranged from 0.24-8.75 mm/a (0.04-1.3% MAP) using rainfall chloride concentrations of 0.1 mg/L. Regional recharge of 30.1 mm/a (4.6% MAP) were calculated using groundwater chloride concentration of 0.1 mg/L. The estimated recharge rates from EARTH model ranged from 3 to 10.3% of mean annual precipitation(MAP). The average estimated recharge rate was calculated as 6.12% of the MAP which is equivalent to 40.1 mm/a. Both EARTH model and CMB method yielded comparable results and were found to be similar to those obtained from other studies. High recharge was estimated in high elevation area while low recharge was estimated in low elevation area. The results obtained from this study have confirmed and expanded existing knowledge on the nature of groundwater recharge response from rainfall in fractured aquifers in semi-arid areas and the applicability of EARTH model and CMB method in recharge estimation in the same environment. 

Abstract

The frequency, intensity, and duration of droughts are increasing globally, putting severe pressure on water supply systems worldwide. The Western Cape Province suffered from a period of severe water shortages that began around January 2015 and lasted until about July 2018. During this recent drought, there was a forced reduction in water use, predominantly from the agricultural sector. Citizens also reduced water use and increasingly tapped into groundwater for their needs irrespective of whether the hydrogeology was considered favourable or not. Unmonitored and unregulated abstraction of groundwater, especially under unstable climatic conditions, poses a significant risk to the future water security of the Western Cape.
We hypothesize that groundwater enabled the municipalities, residents, and industries of the Western Cape to survive the recent drought. Our aim is to evaluate the change in groundwater storage during the 2015 to 2018 drought and its subsequent recovery. To achieve this, we must gain a comprehensive understanding of the dynamics of separate components of the water cycle, as well as the overall water balance.

While there is data on surface water use during the drought, the impact on groundwater resources has yet to be evaluated. However, the accurate assessment of groundwater use is difficult, especially in data-scarce regions, such as South Africa. In our study, we combine remote sensing from NASA’s Gravity Recovery and Climate Experiment (GRACE), the Global Land Data Assimilation Systems, groundwater level measurements from the National Groundwater Archive, and ancillary datasets from the City of Cape Town’s weekly water dashboard to assess the total change in groundwater storage in the Cape Town Metropolitan area and surrounding cities over an 8-year period, from 2012 to 2020. Preliminary results from GRACE data analysis show a steady decline in aquifer saturated thickness over the drought, indicative of an increase in groundwater use.

Abstract

The groundwater quality component of the Reserve serves as guidance for groundwater quality requirements when assessing water use license applications. The Reserve is the quantity and quality of water required to satisfy the basic human needs and protect the aquatic ecosystem in order to ensure ecologically sustainable development and use of water resources. This component provides guidance when assessing the suitability of groundwater for drinking purposes. The current groundwater quality was based on the Quality of domestic water supplies, assessment guide (vol. 1,2nd   ed.,  1998).  The  parameters  that  were  assessed  in  the  current  template  include  chemicals: sodium, magnesium, calcium, chloride, sulphate, nitrate and fluoride; and physical parameters: pH and  electrical  conductivity.  The  above-mentioned  ions  cater  for  most  water  uses  applied  for, whereas the revised template will also include microbiological (escherichia coli), toxics (zinc, manganese, iron, cadmium, cobalt and copper) for local government and mining commodity/by- product specific water use applications. The current water quality basic human needs values will also be replaced with SANS 241 (2011) guidelines. Inputs and suggestions are therefore requested from various end users/stakeholders.

Abstract

This study presents a novel approach for developing geologically and hydrogeologically consistent groundwater models at large valley scales. Integrating geological, geophysical, and hydrogeological data into a single model is often challenging, but our methodology overcomes this challenge by combining the Ensemble Smoother with Multiple Data Assimilation algorithm (ESMDA) with a hierarchical geological modelling approach (ArchPy). The ESMDA framework assimilates geophysical and hydrogeological field data jointly. To diminish the computational cost, the forward geophysical and groundwater responses are computed in lower-dimensional spaces relevant to each physical problem, alleviating the computational burden and accelerating the inversion process. Combining multiple data sources and regional conceptual geological knowledge in a stochastic framework makes the resulting model accurate and incorporates robust uncertainty estimation. We demonstrate the applicability of our approach using actual data from the upper Aare Valley in Switzerland. Our results show that integrating different data types, each sensitive to different spatial dimensions enhances the global quality of the model within a reasonable computing time. This automatic generation of groundwater models with a robust uncertainty estimation has potential applications in a wide variety of hydrogeological issues. Our methodology provides a framework for efficiently integrating multiple data sources in geologically consistent models, facilitating the development of hydrogeological models that can inform sustainable water resource management.

Abstract

Open pit mines often experience problems related to groundwater inflows. To perform mineral extractionin safe conditions with high productivity, it is essential to have dry working conditions. For this reason, the groundwater table is often lowered below the elevation of the floors of the pits by using various dewatering schemes. Numerical groundwater models are powerful tools that can be used to simulate the behaviour of aquifers during dewatering operations. However, these models typically require a lot of geohydrological data which are often expensive and time-consuming to collect. When geohydrological input data are limited, artificial neural networks (ANNs) provide an alternative approach of predicting the behaviour of the groundwater system during dewatering. This study investigated the possibility of predicting the impacts of pit dewatering on the aquifer system in the vicinity of open pit mines where geohydrological inputs are limited, using ANNs. First, the performance of the ANNs in predicting hydraulic head responses was evaluated by using synthetic data sets generated by a numerical groundwater model developed for a fictional mine. The synthetic data sets were then used to both train and evaluate the performance of the ANNs. The ANN found to give the best predictions of the hydraulic heads had an architecture of 2-6-1 (input-hidden-output layers) and was based on the hyperbolic tangent transfer function. This network was selected to predict the hydraulic heads at a number of piezometers installed at two open pit mines in the Democratic Republic of the Congo. The only input to the ANN was the recorded hydraulics heads and the time of recording. A portion of the real data set was used to train the ANN, while the remaining portion was used to evaluate the performance of the ANN in predicting the hydraulic heads. The results of the performance analyses indicated that the ANN successfully predicted the general behaviour of the aquifer system under dewatering conditions, using only limited input data. The results of this investigation therefore illustrate the great potential of using ANNs to predict aquifer responses during dewatering operations in the absence of comprehensive geohydrological data sets. Since these networks recognise patterns in the training data sets without considering the underlying physical principles that govern the processes, the responses of complex systems that are dependent on numerous parameters may be predicted.

Abstract

The Two-Streams catchment located in the KwaZulu-Natal Midlands, South Africa has been used as an experimental catchment over the past decade to investigate the impacts of Acacia mearnsii stands on hydrological processes. As part of the ongoing study, the hydrogeology of the catchment was investigated and characterized to understand the impacts of Acacia Mearnsii plantations on groundwater. The hydrological, hydrogeological, hydrochemical and environmental isotope methods were employed in characterizing the hydrogeology of the catchment. The study area is underlain by three geological units: top weathering profile, mainly of clay, which is underlain by weathered shale. Shale is in turn underlain by granite rock. Two hydrostratigraphic units were identified: an unconfined aquifer occurring along the weathered shale and the underlying regional semi-confined aquifer. The regional aquifer is characterised by transmissivity range of 0.15 to 0.48 m2/day, hydraulic conductivity of 0.04 m/day and annual recharge of 31.9 mm. The catchment receives a mean annual rainfall of 778 mm, mean annual evapotranspiration of 802 mm and mean annual stream discharge of 20387 m3. The groundwater and stream samples are characterised by mean specific electrical conductivity of 28.5 mS/m and Ca-HCO3 and Ca-Cl dominant hydrochemical facies. Isotopic values indicate recharge from rainfall with insignificant evaporation during or prior to recharge. Seasonal stream isotope data analysis indicates groundwater as the main contributor of streamflow during dry season. Furthermore, the impacts of Acacia mearnsii trees on groundwater were investigated. Results show that direct groundwater uptake by tree roots from the saturated zone at Two-Streams would not be possible due to limiting root depth. Thus, in instances where the regional groundwater table is not available for direct abstraction by tree roots, trees can have large impact on groundwater by extracting water from the unsaturated zone, reducing recharge to aquifers and baseflow, without having direct access to groundwater

Abstract

To increase the security of groundwater resources, managed aquifer recharge (MAR) programs have been developed and implemented globally. MAR is the intentional recharge and storage of water in an aquifer, which will be recovered later. It was previously known and implemented as Artificial Recharge (AR). In South Africa, the documented practice dates back 40 years. There are five main MAR methods: Well-Shaft-Borehole, Spreading-induced bank infiltration, In-channel modifications, and Runoff harvesting. Two regional-scale MAR suitability maps for the Spreading Method (SM) and the Well-Shaft-Borehole (WSB) Method were compiled for South Africa, using the Geographic Information System combined with Multi-Criteria Decision Analysis (GIS-MCDA) methodology. Parameters used to compute the maps included the nature of the different aquifers, groundwater level, water quality (EC), distance to river, terrain slope, mean annual rainfall, land cover, soil moisture availability and clogging (Fe-iron content). To create a suitability map, the parameters were combined using the weighted overlay method and the Analytic Hierarchy Process (AHP – specifically the pairwise comparison). The site suitability maps indicated that most areas in South Africa are suitable for the Spreading and Well-Shaft-Borehole methods. The results were verified with the location of existing MAR schemes and were found to agree. However, these maps are not applicable for siting projects at a local scale but can serve as a guide and screening tool for site-specific studies looking for highly suitable or target areas for MAR implementation

Abstract

In a town where 98% of the population relies on groundwater-dominated resources, Atlantis is also plagued by varied abstraction rates that promoted iron and manganese borehole clogging. Conventional treatment methods, such as pump-and-treat technology, can be costly and inefficient. In-Situ Iron Removal (ISIR) technologies addresses issues such crucial skilled operators, handling and storage of chemicals, expert management, and the disposal of generated sludge. ISIR has been successfully practised worldwide especially in Europe, for well over a 100 years. In South Africa however this methodology has not filtered through, although our groundwater systems have clogging problems related to iron and manganese precipitation. Atlantis in the Western Cape has benefitted from a pilot study that looked into ISIR and the unique idea of utilizing ozonation. The pilot project was successful, although applied on a small scale. This called for a further study that is now looking into extending the range of treatment, applying the principles of the Vyredox method, and lengthening the treatment period to 3 months of continuous injection. The study also aims to develop the engineering design criteria for full scale application. The success of this project and the technology to be developed goes a long way towards achieving Sustainable Development Goal 6 and improving South Africa’s groundwater systems.

Abstract

Groundwater level monitoring is essential for assessing groundwater’s availability, behaviour and trend. Associated with a modelling tool, groundwater level fluctuations can be predicted in the short to middle term using precipitation probabilities or meteorological forecasts. This is the purpose of the MétéEAU Nappes tool implemented by BRGM for the City of Cape Town (CoCT) in the Table Mountain Group Aquifer (TMGA). This case study shows how near real-time groundwater level monitoring can support the municipality in managing its future groundwater withdrawals. The TMGA is an important source of groundwater in the Western Cape region of South Africa. The upper Nardouw Sub-Aquifer of the TMGA is an unconfined aquifer recharged by rainfall. It had been monitored in the Steenbras area for over 10 years before CoCT started groundwater production from the Steenbras wellfield in 2021. The MétéEAU Nappes forecasting tool is already implemented on many observation wells of the French national piezometric network, where it is used for decision-making by the French administration. It allows, in particular, to anticipate several threshold levels of drought and take appropriate measures. It combines real-time water cycle measurement data with a groundwater level lumped model (e.g. Gardenia model) and extrapolates observations for the next 6 months from statistical meteorological scenarios completed with abstraction scenarios. This tool can help protect the Steenbras wellfield as a critical water source for CoCT in the TMGA. This study was financed by the French Agency for Development (AFD).

Abstract

The Netherlands produces about 2/3 of drinking water from groundwater. Although there is seemingly abundant groundwater, the resource needs to be carefully managed and used wisely to safeguard the resource for future generations and in case of disasters whilst also preventing negative impacts from groundwater extraction on other sectors such as nature. Provincial governments are responsible for the protection of existing groundwater abstractions for water supply against pollution. To secure groundwater resources for the future, two additional policy levels have been introduced: Provincial governments have been made responsible for mapping and protecting Additional Strategic Reserves. These allow for additional groundwater abstractions to meet growing demands in coming decades (horizon 2040/2050). The National Government is responsible for mapping and protecting the National Groundwater Reserves (NGRs) as a third level of resource protection. NGRs serve multiple goals: to protect natural groundwater capital for future generations, to provide reserves for large-scale disasters affecting water supply and to provide reserves for possible use as structural water supply in the far future (horizon 2100 and beyond). NGRs are being delineated in 3D using detailed existing geological models and the Netherlands’ national (fresh-saline) hydrological model. The dynamics of the groundwater system are analysed through scenario analyses. Reserves for potential structural use are selected such that negative impacts on nature are prevented if future abstractions are to be realised. The policies being developed must balance interests of water supply against other sectoral interests such as the green-energy transition with increased use of geothermal energy and aquifer-thermal-energy-storage.

Abstract

The natural CO2 springs at the Bongwana area emanates from a number of sites along an 80 km long N-S trending fault known as Bongwana fault. CO2 rich groundwater is observed at a shallow depth in a borehole drilled for water supply parallel to the main fault. The geology along the entire fault length is characterized mainly by Dwyka Group sediments. The objectives of this study are to characterize the CO2 springs and assess their impacts on groundwater and surface water quality. To that end, existing literature and data were reviewed followed by the collection of groundwater and surface water samples at both CO2 emission and CO2 free streams, springs and boreholes around the length of the Fault zone. Major ions, trace elements and environmental isotopes analyses were carried out on the samples collected. EC, TDS, pH, Temperature, DO, Eh, ORP, total alkalinity, CO3 2- , HCO3 - ) were measured onsite. Acidic pH conditions, elevated TDS, EC and trace metals concentration were detected in all CO2 emission sites compared to CO2 free streams, springs and boreholes. These results clearly show the impacts of CO2 on groundwater and surface water quality within the vicinity of emission points. All the travertine cone springs located near Umtamvuna River are characterized by Na-Ca-Mg-HCO3 water types, while boreholes from shallow groundwater and river samples show Ca-Na-Mg-HCO3 types. The correlation among the deep CO2 rich groundwater parameters indicates that the major geochemical processes that could be responsible for the observed chemical composition are the precipitation of calcite and dolomite where their saturation indices (SI) range from 0.74 to 0.82 and from 0.24 to 1.35, respectively and the weathering of feldspars. Stable isotope (δ18O and δ2H) composition of the travertine cone springs shows a major negative shift from the meteoric water lines with δ18O and δ2H values ranging from -7.78 to -6.52 ‰ and -21.5 to -17.9 ‰, respectively. The stable isotopic composition of shallow groundwater reflects local and modern meteoric recharge. These observations indicate that the reservoir and source of recharge for the deep circulating groundwater are different from the shallow groundwater. It appears that natural CO2 emission along the Bongwana fault have impacted the ambient groundwater and surface water quality at the emission sites rendering it unfit for human consumption due to elevated concentration of dissolved constituents above safe drinking standards. The implication of this to CCS in South Africa is the fact that any unintended CO2 leakage into fresh groundwater and surface water resources from subsurface storage site can impact this already scarce resource. Therefore, strict scientific site selection protocols and CO2 leakage detections through properly designed monitoring systems are required to minimise the risk.

Abstract

Groundwater forms an important part of the water resources of South Africa, especially in Karoo region, where groundwater is an important source of fresh water. Beaufort West is a town that uses groundwater as a major source of municipal and private water supply. Groundwater samples were collected from a network of 43 boreholes, between November 2015 to December 2018 within Beaufort West town and 10km radius surrounding. The water samples were analysed for inorganics, organics, stable isotopes and radioactive isotopes. The hydrogeochemical results indicate that all the boreholes onsite are collecting water from the shallow aquifer with neutral pH. From the 228 groundwater samples analyses, the total dissolved solids (TDS) concentrations averaged 1041 mg/L. This falls within the SANS 241:2015 guideline standard of ? 1200 mg/L for TDS. The high nitrates and sulphates in the water indicate that shallow aquifer has aerobic conditions. Generally, the water type is Calcium Magnesium Bicarbonate and Magnesium Sulphate. Both the inorganic chemistry and the stable isotopes have a signature of water that is recently recharged. The carbon dating results indicate that water has been underground for no more than 3 000 years. The groundwater samples generally show no contamination of organic compounds with the exception of boreholes located in the Karoo National Park, which showed high amounts of organic compounds (xylene and ethylbenzene). The interaction of the known uraniferous deposit of the Poortjie Formation in the Beaufort West area has possibly influenced the groundwater. This has resulted in groundwater with elevated average amount 17.58 ?g/L of uranium against background values of 10 ?g/L. This is however below the SANS 241:2015 standard of 30 ?g/L.

Abstract

South Africa is generally a dry country, it receives an average rainfall of approximately 500 mm/a, which is below the global average rainfall of 860mm/a. The annual average temperature in the study area was 25?C from 1995 to 2016. South Africa has made an improvement since 1994 with supplying domestic water of suitable standards, communities in rural areas, mostly have groundwater as the best option for satisfying their water demands. In the study area (Bushveld Igneous Complex), which falls within the Olifants and Limpopo Water Management Area (WMA), groundwater is used in various sectors for various. In both WMA's the irrigation sector is the highest water user. In 2015 irrigation accounted for approximately 72% of the total water requirements in the Limpopo WMA, with 57% of the irrigation requirements fulfilled by groundwater resources. In the Limpopo WMA groundwater resources supply also 44.5% of the domestic water requirements, while surface water resources account for only 21% and water transfer schemes account for 34.5%. In the Olifants WMA the mining sector uses 28 million m3/a of groundwater resources and 58 million m3/a from surface water resources. The aim of this research is to determine the hydrochemical variation and the suitability of groundwater for irrigation and drinking purpose for a sustainable agriculture and basic human needs. There are chiefly five hydro-chemical facies on regional scale identified based on the piper diagrams, namely the Ca-HCO3, mixed Ca-Mg-Cl type followed by Ca-Cl, Na-Cl and mixed Ca-Na-HCO3 water type. The suitability of groundwater is determined based on the water type, the mixed-Ca-Mg-Cl and Ca-HCO3 water types are generally suitable for domestic purposes as per SANS drinking water standards, while the mixed Ca-Na-HCO3, Ca-Cl and Na-Cl water types are mostly not suitable drinking water unless treated.

Abstract

Coastal wetlands are complex hydrogeological systems in which groundwater have a significant influence on both its water balance and hydrochemistry. Differences in groundwater flow and groundwater chemistry associated with complex hydrogeologic settings have been shown to affect the diversity and composition of plant communities in wetland systems. A number of wetlands can be found across the flat terrain of the Agulhas Plain, of which the most notable is the Soetendalsvlei and the Vo?lvlei. Despite the ecological and social importance of the Vo?lvlei, the extent to which local, intermediate and regional groundwater flow systems influences the Vo?lvlei is poorly understood. The aim of this work is to characterize the spatial and temporal variations in surface water and groundwater interactions in order to demonstrate the influence of groundwater flow systems on the hydrology of the Vo?lvlei. The specific objectives of the study are; 1) to establish a geological framework of the lake sub-surface, 2) to determine the physical hydrological characteristics of the Vo?lvlei and 3) to determine the physical-chemical and isotopic characteristics of groundwater and surface water. Data collection will be done over the period of a year. Methods to be used will include the use of geophysical (electrical resistivity) to determine high water bearing areas surrounding the wetland, a drilling investigation (the installation of piezometers at 5-10m depths and boreholes at 30m depth, sediment analysis (grain size analysis, colour and texture), hydraulic (slug testing to determine hydraulic properties; hydraulic conductivity and transmissivity), hydrological (to estimate groundwater discharge; Darcy flux and hydraulic head difference between groundwater level and lake level), physical-chemical (electrical conductivity, temperature and pH) and stable environmental isotopic (oxygen and hydrogen) analysis of surface water and groundwater, to determine flow paths and identify processes. Thus far, results obtained for the geophysical survey has revealed that the sub-surface of this wetland system is highly variable. Three traverses were done on the South-Western, South-Eastern and Northern side of the wetland (See Figure 1). In VOEL1 (South west), the upper couple of meters show areas of very low resistivity, which is associated with clays, poor water quality and water which has high dissolved salts. The changing of medium to high resistivity values on the North-eastern side is usually indicative of weathered sandstone (Table Mountain Group). VOEL2 (South eastern), indicates that the subsurface is of low resistivity. These low values are the result of noticeable salt grains in the sand. VOEL3 (Northern), indicated upper layers of low resistivity, while the lower depth indicate areas of high resistivity. It is expected that the results of this study will provide a conceptual understanding of surface water-groundwater interactions and the processes which control these interactions, in order to facilitate the effective management and conservation of this unique lacustrine wetland.

Abstract

Surface water resources are under threat of depletion and quality deterioration due to various factors such as climate change, urbanization, and population expansion. Managed aquifer recharge (MAR) is a technique that has been successfully implemented over the last 4 decades to sustain the balance between water demand and availability. The unsaturated zone, where source water is introduced during infiltration, plays a major role in the reduction of contaminants present in water before it naturally percolates and reaches the aquifer. This research aims to evaluate the removal efficiency of contaminants by the unsaturated zone. Three objectives to be accomplished are; to determine and classify the chemical composition of the source water. Secondly, to determine the hydraulic properties of the soil in the area of interest. Lastly to evaluate the contaminants removal efficiency, by tracing the quality of water at the point of recharge and discharge. The Atlantis water resource management scheme in the Western Cape will be used as a case study, in order to assess the relationship between the unsaturated zone and the reduction of contaminants.

The current study argues that during the artificial recharge of aquifers, contaminants present in the source water filter through the unsaturated zone, where natural processes, as well as resident microbes, reduce their concentrations to acceptable levels. Assessing the ability of the unsaturated zone to reduce contaminants, will allow for the early warnings of contamination potential and the execution of informed prevention strategies that can be used in decision making of the management and protection of water resources. Additionally, the advanced understanding of the role that the unsaturated zone plays in eliminating contaminants can be used to account for satisfactory groundwater quality in areas where groundwater is not constantly monitored and artificial remedies are not applied.

Abstract

For the Department of Water and Sanitation (DWS) to better leverage the wealth of information being collected by various “silo” operational source water information systems, a high-priority initiative was launched to establish a National Integrated Water Information System (NIWIS), which currently consists of over 40 web-accessible dashboards including groundwater related dashboards mostly accessible to the public. Dispersed and disintegrated data and information stored in different sources and formats would hinder decision support in the water sector and deter improvement in service delivery by the DWS. The DWS undertook an extensive and rigorous business requirements analysis exercise within the DWS to ensure that the proposed system does not become a white elephant and facilitate the prioritization of system deliverables. A prototype (waterfall) approach was adopted to develop the NIWIS to ensure the development was still within the suggested business requirements. NIWIS has enabled mostly DWS managers to establish one trusted source of decision-making information for timeous, effective and efficient responses to service delivery. The number of NIWIS dashboards continues to grow as improved data-related business processes are adopted. The unavailability of reliable data from DWS data sources and the exclusion of business requirements from organizations external to DWS were identified as the main challenges to NIWIS disseminating comprehensive, credible information. Therefore, this paper aims to provide some details of the geohydrological information that NIWIS provides and seek feedback from this International Hydrogeologists community for further development of NIWIS.

Abstract

The Sagole hot spring is located in the northern Limpopo Province of South Africa. Investigations were carried out in order to investigate the groundwater aquifer and water chemistry. Results were envisaged to the understanding of the geothermal potential of the area. Regional scale airborne magnetic data and geology were used for identifying structures and lithological boundaries that are associated with thermal groundwater aquifers. Detailed ground follow-up and verification surveys were  carried  out  across  the  target,  using  magnetic,  electrical  resistivity  tomography  (ERT), frequency-domain electromagnetic (FDEM) and radiometric methods. Water samples were collected from the spring eye and archival groundwater data was analysed. The interpretation of the airborne magnetic data revealed the presence of west to east, northwest and intersecting lineaments at the hot spring. From magnetic data, the groundwater aquifer was found to be capped by basalt with heat rising to the surface along possible geological contacts, faults or fractures. The FDEM profile data across the aquifer zone had peak values above 100 mS/m. The inversion of ERT data defined a highly electrical conductive, low resistivity with thickness of about 60 m. Chemical analysis of the ground water revealed that the water does not have any indication of pollution. The thermal water was found to be of meteoric origin. The drilling of artesian thermal boreholes through the capping basalt should be explored. The hot-water boreholes will be utilised by the community for domestic, irrigation and possible development of micro-geothermal systems.

Abstract

Characterization of Groundwater Potential in the northern parts of the Limpopo Province, South Africa: Results from Integrated Geophysical Studies across the Sagole and Tshipise Hot Springs.
The Sagole and Tshipise hot springs are located in the northern Limpopo Province of South Africa. The geology of the area consists of dykes, dolerite sills, quartzite and undifferentiated meta-sediments. Regional-scale airborne magnetic data and satellite images were used for mapping structures and lithological boundaries in order to identify permeable zones that are associated with thermal groundwater aquifers. Various filtering techniques were used to enhance the magnetic signatures that correspond to structural features. Modeling of airborne magnetic data indicated that the heat source depth was an anticlinal structure at a depth range of 3 km to 5 km. Based on results of interpretation of the magnetic and satellite images, ground follow-up targets were identified. Detailed ground geophysical surveys were carried out across the identified targets using the frequency-domain electromagnetic (EM), electrical resistivity tomography (ERT) and magnetic methods.
{List only- not presented}

The result of interpretation of magnetic data was combined with two-dimensional modeling EM and (ERT). Modeling of the electrical conductivity of the subsurface layers was constrained using existing borehole data. Interpretation of the airborne magnetic data revealed the presence of number of NE-SW striking lineaments that transect the metasedimentary rocks of the Soutpansberg Supergroup. In addition, these structures are manifested by a number of hotsprings that are aligned along major lineaments. The interpretation of 2D modeling of ERT data revealed a highly conductive layer with a depth ranging from surface to 40 m that may be attributed to elevated moisture content. Two-Dimensional modeling of frequency-domain electromagnetic data was carried out to delineate lateral and vertical variation of electrical conductivity. Electrical conductivity values in the range 50 mS/m to 100 mS/m were obtained, indicating the presence of water bearing zones or fractures. Results of the study have shown that hot water rises to the surface along near vertical faults or fractures.

Keywords: Aquifer, geophysics, groundwater, thermal spring

Abstract

The Table Mountain Group (TMG) Formation in the Uitenhage region, in the Eastern Province of South Africa, has many groundwater users, which could result in the over-exploitation of the underlying aquifer. Consequently, several investigations have been conducted to help in the planning and management of groundwater resources within the region. Traditionally, these investigations have considered groundwater and surface water as separate entities, and have been investigated separately. Environmental isotopes, hydrochemistry and feacal colifom bacteria techniques have proved to be useful in the formulation of interrelationships and for the understanding of groundwater and surface water interaction. The field survey and sampling of the springs, Swartkops River and the surrounding boreholes in the Uitenhage area have been conducted. After full analysis of the study, it is anticipated that the data from the spring, Swartkops River and the surrounding boreholes show interannual variation in the isotope values, indicating large variation in the degree of mixing, as well as to determine the origin and circulation time of different water bodies. ?D and ?18O value for the spring ranges from ?18.9? to ?7.4?, and 5.25? to 4.82?, respectively, while ?D values for borehole samples range from ?23.5? to ?20.0? and ?18O values range from ?5.67? to ?5.06?. In the river sample, ?D values ranges from ?12.1? to ?4.2?, ?18O from ?3.7? to ?1.13?, respectively. The entrobacter aerogen and E.Coli bacteria were detected in the samples. E. coli population for spring and the artesian boreholes indicated low value while the shallow boreholes had higher values are relatively closer to those of the middle ridges of the Swartkops River. The EC values for the spring samples averages at 14 mS/m, borehole samples ranges from 21 mS/m to 1402 mS/m, and surface water ranges from 19 mS/m to 195 mS/m. Swartkops River is an ephemeral, therefore it is expected that diffuse recharge occurs into the shallow aquifer.

Abstract

The argument in this paper is that improved understanding of science-policy integration, where physical bases of natural science is combined with practice in managing water resource challenges, becomes critical in translating scientific knowledge into effective and sustainability solutions linked to groundwater resource protection. Such hypothesis should be attested at locally relevant scale where water resources reside and where water utilization takes place. This paper provides a practical case-study of how science-policy integration can directly impacts groundwater resource protection practice from a local, and national perspective using strategies of groundwater resources directed measures.

A combination of literature surveys, and desktop record review methods were used for the purpose of data collection from published literature and publicly accessible national databases of the Department of Water and Sanitation (DWS). Collected data were analysed using document analysis, descriptive statistics, and case study analysis methods. Based on the analysis, three types of science-policy nexus theoretical models exist in practice, namely, 1) science-policy integration, 2) policy-science integration, and 3) mixed integration. From a national perspective, the analysis showed that South Africa is able to practically apply science-policy nexus in policy implementation practice for water resources protection, and that such practice depicts a mixed integration model of the nexus. Case study analysis of the Schoonspruit-Koekemoerspruit River Catchment provided insight on how localized operationalization of groundwater resource directed measures facilitates sustained groundwater resources protection for water availability and sustainable utilization. This study provides an exemplary for collaborations between researchers and/or scientists and policy makers to ensure that science research is answering policy-relevant questions and that results from scientific work are readily available for policy implementation. In addition, there is adequate evidence to indicate that science-policy nexus can be designed and prioritized to support sustainable development agenda on groundwater resilience, and visibility at various levels.

Abstract

Using citizen science approach to influence implementation of science-policy interface concept leads to optimal use and protection of groundwater resources that ensures sustained research for practical policy dialogue. Mere determination of water resource classes, the reserve and resource quality objectives within the resource directed measures (RDM) concept for protection of groundwater water resources without considering implementation aspects, propels for defiance in policy implementation at local scale. Although water resource classes and resource quality objectives have not yet been implemented at any catchment at this stage, however findings indicate that in some areas challenges have been experienced with preliminary Reserve implementation at local level, especially in water use license applications. There is a need for an orthodox link between RDM and Source Directed Controls (SDC) to complement current methods used and processes followed in GRDM projects for uncontested RDM implementation to ensure sustainable groundwater resource protection especially at local site where the resource reside. The argument in this paper is that a feasible implementation for GRDM at local level provides science-policy interface platform for the sustained operation of the science-citizen approach. The objective of study was to design a field-tested conceptual model of science-policy interaction that monitors and evaluates GRDM intervention. How policy implementation and evaluation utilizes scientific research outputs at local level were examined using ecological model. Key findings  indicated that (i) systems analysis approach was lacking at local level (ii) practical assessments of GRDM at local specific quaternary catchment scale was not adequate (iii) optimal reserve determination methodology for uncontested water utilisation was not clear to provide proper guidance for water use license application (iv) Reflective operational plan (GRDM monitoring) to enhance science-policy interaction was not available at quaternary catchment scale (v) Best practices of adaptive management principle to sustain groundwater resource protection were limited at local level. From these results, it can be said that the up scaling of the current approach for RDM especially GRDM requires refinement for practical uptake of scientific results. The study recommended that a feasible implementation plan for GRDM at local level that provides science-policy interface platform for the sustained operation of the science-citizen approach need to be designed, implemented, monitored and evaluated with citizens to inform reflective policy implementation. Although, the results of this study are not conclusive, the insights as a starting point for proactive buy in approach is provided to ensure that science-policy interaction remain practical and relevant to scientists and policy makers as well as society.

Abstract

The monitoring of groundwater to detect changes resulting from anthropogenic activities requires an understanding of the particular aquifer system, release mechanisms and migration pathways which form the basis of a conceptual hydrogeological model. This conceptual hydrogeological model illustrates the connections between sources, pathways and receptors. The objective of a monitoring programme implemented in the context of shale gas exploration activities in the Karoo would be the detailed monitoring of groundwater quality for the protection of groundwater users. This objective requires a defensible baseline dataset so that changes in water quality can be investigated.  In selecting parameters to monitor, cognisance must be taken of parameters which occur in multiple sources, those naturally present in the shallow potable aquifer, potential tracers representing the deeper groundwater and additives arising from the exploration activities. Sodium, potassium and chloride  are  all  likely  to  be  present  in  both  deep  and  shallow  groundwater  and  are  potential additives. Given the expected higher salinity of deep connate groundwater, the use of aggregate parameters such as electrical conductivity might be of particular importance. Lithium, fluoride, strontium and uranium, while constituents of both the shallow and deep groundwater, are likely to be present at higher concentrations in the deeper groundwater, and could be indicators of deeper groundwater.  Geochemical  analysis  of  cores  may  provide  initial  clues  as  to  such  indicator parameters. Methane, which is known to occur in some existing Karoo boreholes, is potentially one of the more mobile tracers which could indicate migration from potential future production zones to shallow aquifers. The viability of using methane and other dissolved gasses (for example ethane) as indicators would require the use of stable isotope analyses to elucidate the origin of the gases.

Abstract

The subsurface has been likened to a maze due to the intricate and often disconnected pathways contained even in unconsolidated and relatively homogeneous aquifer systems. The weathered fractured aquifers in the Karoo offer unique challenges to those planning monitoring campaigns and provide opportunities for the research community to identify innovative solutions. Careful thought needs to be given to the objectives of monitoring as these can change the requirements of the work. Other important considerations are the location and design of monitoring wells which often needs to be tailored to site specific conditions while the selection of determinands to be analysed introduces yet another layer of complexity. These include questions around the relevant detection limits, representative sampling methods and a host of other aspects. Following prescribed approaches designed for managing traditional industrial processes may not be relevant even though these approaches are based on decades of research and learning from past experience, both good and bad. Careful consideration of the technical detail in advance of beginning any monitoring in the field is essential and even then, as in any hydrogeological assessment, a level of uncertainty will always remain. This presentation will cover the status of planning work on Karoo aquifer characterisation and geochemical assessment of the ambient or baseline conditions. Significant effort continues to be made to tailor fieldwork to site specific conditions and be ready to collect a representative data set when conditions allow. {List only- not presented}

Abstract

LNAPL present in a monitoring well forms part of the broader groundwater system and is effectively influenced by hydrogeological conditions, which are always changing. Monitoring of LNAPL is therefore of utmost importance to identify and assess the LNAPL hydrogeological conditions. Both groundwater and LNAPL can exist as unconfined and confined. Groundwater is unconfined when the upper boundary is the water table and is confined as a result of the presence of a confining layer with a relatively low vertical hydraulic conductivity that inhibits the flow of all liquids. LNAPL becomes unconfined when the apparent free product thickness increases with a decreasing groundwater elevation and confined when apparent free product thickness increases with an increasing groundwater elevation. The LNAPL is confined as a result of the difference between the capillary properties of the mobile LNAPL zone and its confining layer. Specifically, LNAPL is confined when it cannot overcome the pore entry pressure of the confining unit. Consequently, LNAPL may be confined when groundwater is not. The paper attempts to describe the hydrogeological conditions in case histories of both primary and fractured aquifers and illustrate how to identify and assess the conditions. Data such as free phase and groundwater level monitoring, well logs, sieving of soil and LNAPL bail tests are used as assessment tools. The additional required data is gathered and integrated in the conceptual site model, followed by a revision of the CSM and a refinement of decision goals over time. Thus the CSM matures and enables an improved understanding of the site characteristics and the re-adjustment of decision criteria. {List only- not presented}

Abstract

This study assessed the chemical and microbial quality of groundwater and potential risks to human health in Siloam Village, South Africa. Due to lack of access to potable water, residents in rural areas drill private boreholes within their homesteads without considering the potential sources of groundwater pollution. This exposes them to health risks associated with groundwater pollution. Water samples from 11 boreholes were collected from August 2013 to January 2014. pH and EC were measured using a multimeter and turbidity was measured using a turbidity meter. Non-metals and metals were analysed using Ion Chromatography and Atomic Absorption Spectroscopy, respectively. Colilert quanti-tray method was used to determine total coliforms and Escherichia coli. Descriptive statistics were used to determine the overall water quality status. Potential risks to human health were inferred based on Department of Water and Sanitation guidelines for domestic use. Water quality parameters found to have serious potential health effects on human beings were correlated with selected water quality parameters at a significance level (α) of 0.05 to understand the nature of correlation and possible sources of contamination. The study determined that nitrates and fluorides were the only parameters with excessively high concentrations in groundwater which are associated with health effects on human beings. Correlation of fluoride with calcium and pH indicated that further investigations are required to identify the local sources and fluoride control mechanisms in the study area. Correlation of nitrate with chloride and potassium indicated that faecal contamination and fertilisers are sources of nitrate pollution in the study area, though faecal contamination was the dominant source. Faecal contamination was confirmed from total coliforms and E.coli in most boreholes. The study identified the need to educate borehole owners in such villages of possible strategies to minimise groundwater pollution. 

Abstract

In South Africa, the use of stochastic inputs in surface water resources assessments has become the norm while this is rarely done for groundwater resources. Studies that have applied multi-site and multi-variate methods that incorporate stochastic generation of groundwater levels are limited. Stochastic based inputs account for uncertainties attributed to inherent temporal and spatial variability of hydrologic variables and climatic conditions. This study applied variable length block (VLB) stochastic generator for simultaneous generation of multi-site stochastic time series of rainfall, evaporation and groundwater levels. In the study, 100 stochastic sequences with record length of 34 years (1980-2013), similar to the historic one were generated. Performance of VLB was assessed by comparing single statistics of historic time series located within box plots of the 100 annual and monthly stochastically generated time series. The statistics used include mean, median, 25th and 75th percentiles, lowest and highest values, standard deviation, skewness, and serial and cross correlation coefficients. Majority (9 out of 10) of the historical statistics were mostly well preserved by VLB, except for skewness. Historic highest groundwater levels were mostly underestimated. Historic statistics below interquartile range (overestimation) is a common problem of weather generators which can be reduced by including additional covariates that influence atmospheric circulation. The generation of multi-site stochastic sequences support realistic assessment of groundwater resources and generation of groundwater operating rules.

Abstract

A groundwater decision support system (DSS) that incorporates stakeholder participation has been developed for Siloam Village in Limpopo Province, South Africa. Residents of Siloam Village are dependent on groundwater to augment inadequate pipe borne water supply. This creates the need for a DSS that ensures efficient and sustainable management and utilization of water. Such a DSS is constituted of both quantitative and qualitative components. The study further proposes framework for implementation of the DSS which incorporates community participation. This will act as a tool for empowering and educating the communities in rural villages so that they can be able to manage their water resources. The developed DSSs will make it possible for Siloam community to operate their water supply systems efficiently taking into account environmental needs and water quality

Abstract

The serpentinization of ultramafic rocks is a process in which minerals of ferromagnesian nature (e.g., olivine) are transformed into serpentine and produce groundwater with a very high pH. In these settings, CH4 can be produced by combining H2 from serpentinization and CO2 from the atmosphere, soil, carbon-bearing rocks, or mantle, although the microbial generation of CH4, mediated by methanogens utilizing CO2, formate and/or acetate can be another source in these aquifers. In this sense, the hydrochemistry of hyperalkaline springs can provide valuable information about gas origin. The Ronda peridotites (Malaga province, Spain) are one of the world’s largest outcrops of the subcontinental mantle (~450 km2). Hyperalkaline springs (pH>10) emerging along faults present a permanent low outflow (<1 L/s), Ca2+- OH- facies and residence times exceeding 2,000 years. The fluids, poor in Mg2+ and rich in K+, Na+, Ca2+ and Cl-, also contain significant concentrations of dissolved CH4 and other hydrocarbons. Water samples have been collected from eight hyperalkaline springs and analyzed for major, minor and trace elements, including Platinum Group Elements (PGE) and Total Organic Carbon (TOC). The most mobile PGEs (Pd and Rh) are present in all the springs, indicating the existence of potential catalysts for the abiotic synthesis of CH4. High TOC concentrations are observed in some studied springs where previous analyses (i.e., bulk CH4 isotopes) have indicated a microbial CH4 origin.

Abstract

The Dahomey Basin is a transboundary sedimentary basin with its eastern half in south western Nigeria. The vulnerability assessment of the basin was carried out to ascertain the degree of the shallow unconfined aquifers sensitive to groundwater contamination through the investigations of the intrinsic properties of lithology over the unconfined aquifer systems. The basin is a multi-layered aquifer system hosting large population densities particularly in Lagos where nearly half of the population rely on the groundwater for domestics and industrial purposes. The vulnerability evaluation involves determining the protective cover and infiltration condition of the unsaturated zone in the basin. This was achieved using the PI vulnerability method of the European vulnerability approach. The PI method specifically measures the protection cover and the degree to which the protective cover is bypassed. Intrinsic parameters assessed were the subsoil, lithology, topsoil, recharge and fracturing for the protective cover. While, the saturated hydraulic conductivity of topsoil, infiltration processes and the lateral surface and subsurface flow were evaluated for the infiltration bypassed. The results were depicted in vulnerability maps. Map of the protective cover ranges from high to very high. This means a very effective cover over the groundwater resources. The I map revealed a low to very low degree of bypass. The final vulnerability map shows that the Dahomey Basin vulnerability ranges from moderate to very low vulnerability areas. Low vulnerability areas were characterised by lithology with massive sandstone and limestone, sub soils of sandy loam texture, high slopes and high depth to water table. The moderate vulnerability areas were characterised by high rainfall and high recharge, low water table, unconsolidated sandstones and alluvium lithology. The vulnerability map was validated with hydrochemical properties of the groundwater. Chloride and TDS concentration of the groundwater reveals high chloride concentration for low groundwater vulnerability areas while low chloride concentrations were observed for moderate vulnerability areas. Low to moderate groundwater vulnerability areas show low TDS concentrations according to the WHO standards except for the coastal areas with relatively higher TDS concentrations. The groundwater vulnerability maps will be a useful tool for planning land use activities which will minimise groundwater contamination and enhance the protection of the Dahomey Basin groundwater resources.
{List only- not presented}
Keywords: PI method, Dahomey Basin, aquifer vulnerability, protective cover, groundwater resources.

Abstract

Siloam, a village in the Northern province of South Africa (SA) has groundwater reportedly characterised by concentration of fluoride greater than the permissible limit of 1.5 mg/L by the World Health Organization (WHO). In response to reported high incidences (80%) of dental fluorosis in Siloam, sources of fluoride in the groundwater of Siloam village was investigated. Earlier hypothesis suggest that the source of fluoride could be fluorite. Physicochemical parameters were determined using a combined multimeter; while total fluoride (TF) was determined using Ion Chromatograph and Fluoride Ion Selective Electrode. Mineralogy of the rocks and soil in the village was determined using X-ray Fluorescence and X-ray diffraction, respectively. Results revealed that groundwater fluoride concentration ranged from 3.92 to 4.95 mg/L, which are far above the WHO permissible limit and South African National standard. Na-Cl water type was found to be dominant in the water samples which could be due to the heavy weathering of plagioclase present in the parent rocks. TF content of the rocks and soils of the village ranged from 10 to 2000 mg/L. Leachates were obtained by soaking the pulverised rocks and soil in de-ionized water over a period of 24 hours. TF in leachates ranged from 0.27 to 14.88 mg/L and 0.05 to 10.40 mg/L at induced, and non-induced temperature, respectively. Although, previous research hypothesize fluorite to be the possible source of fluoride in the village, this research shows that the main contributors of fluoride to groundwater in Siloam were smectite clays and the muscovite present in the sandstone, Investigation also revealed that the geothermal temperature of groundwater in the area is also a major factor enhancing the release of fluoride from the clay material into the groundwater.

Abstract

Machine learning techniques are gaining recognition as tools to underpin water resources management. Applications range widely, from groundwater potential mapping to the calibration of groundwater models. This research applies machine learning techniques to map and predict nitrate contamination across a large multilayer aquifer in central Spain. The overall intent is to use the results to improve the groundwater monitoring network. Twenty supervised classifiers of different families were trained and tested on a dataset of fifteen explanatory variables and approximately two thousand points. Tree-based classifiers, such as random forests, with predictive values above 0.9, rendered the best results. The most important explanatory variables were slope, the unsaturated zone’s estimated thickness, and lithology. The outcomes lead to three major conclusions: (a) the method is accurate enough at the regional scale and is versatile enough to export to other settings; (b) local-scale information is lost in the absence of detailed knowledge of certain variables, such as recharge; (c) incorporating the time scale to the spatial scale remains a challenge for the future.

Abstract

The National Environmental Management Waste Act, 59 of 2008 (NEMWA) clearly identifies the status and risk of contaminated sites and provides a legislative mechanism for remediation activities to be implemented and controlled. The Draft National Framework for the Management of Contaminated Land (henceforth Framework) provides national norms and standards for the practical implementation of remediation activities in compliance with NEMWA. A soil-screening value (SSV) for the protection of water resources is based on a two-phase equilibrium partitioning and dilution model which includes a dilution factor (DF) and partitioning coefficient (Kd) which converts the water quality guideline to a total soil-screening value. This paper presents a methodology to use soil-specific Kd  values to improve the accuracy of the new South African guideline for contaminated land.

Appropriate Phase 1 screening assessments are important due to the potential consequence it holds. Some uncertainty exists in the Phase 1 screening values due to variability in Kd values for different soil. This study shows that the Kd  values selected for the Framework is not representative of typical South African soils. Cu Kd values exceed the value provided by the Framework in all soils, but are lower that the Framework V Kd value in all soils. For Pb, low clay content weathered soils have lower Kd, but higher clay content soils are up to four orders of magnitude higher that the Kd in the Framework. Furthermore, due to the large variability (three to four orders of magnitude for Cu and Pb) point estimates of a single Kd value cannot be used for all soil types. However, for V only one order of magnitude variation is found. 

A way of addressing the uncertainty would be to determine the water soluble portion during the assessment. This would dramatically increase the certainty with which screening is conducted and could prevent significant inappropriate screening. Additional cost incurred be offset by saving as a result of unnecessary Phase 2 assessments or the reduction of undetected risks that later could impact the environment. 

Phase 1 screening could also be improved by including soil classification and some basic soil properties in the site assessment and adjusting Kd values, accordingly. Soil properties that can be used are typically clay content, pH and organic matter content. From these properties more appropriate Kds can be estimated for use in setting screening values.

Abstract

Globally, a growing concern have been that the heavy metal contents of soil are increasing as the result of industrial, mining, agricultural and domestic activities. While certain heavy metals are essential for plant growth as micronutrients, it may become toxic at higher concentrations. Additionally, as the toxic metals load of the soil increases, the risk of non-localized pollution due to the metals leaching into groundwater increases. The total soil metal content alone is not a good measure of risk, and thus not a very useful tool to determine potential risks to soil and water contamination. The tendency of a contaminant to seep into the groundwater is determined by its solubility and by the ratio between the concentration of the contaminant sorbed by the soil and the concentration remaining in solution. This ratio is commonly known as the soil partitioning or distribution coefficient (Kd). A higher Kd value indicate stronger attraction to the soil solids and lower susceptibility to leaching. Studies indicate that the Kd for a given constituent may vary widely depending on the nature of the soil in which the constituent occurs. The Kd of a soil represents the net effect of several soil sorption processes acting upon the contaminant under a certain set of conditions. Soil properties such as the pH, clay content, organic carbon content and the amount of Mn and Fe oxides, have an immense influence on the Kd value of a soil. Kds for Cu, Pb and V for various typical South African soil horizons were calculated from sorption graphs. In most cases there were contrasting Kd values especially when the cations, Cu and Pb, had high contamination levels, the value for V was low. There is large variation between the Kds stipulated in the Framework for the Management of Contaminated land (as drafted by the Department of Environmental Affairs) and the values obtained experimentally in this study. The results further indicate that a single Kd for an element/metal cannot be used for all soil types/horizons due to the effect of soil properties on the Kd. The results for Cu and Pb indicated that the Kds can range in the order of 10 to 10 000 L/kg for Cu and 10 to 100 000 L/kg for Pb. The variation in V Kd was not as extensive ranging from approximately 10 to 1 000 L/kg. {List only- not presented}

Abstract

Saldanha Bay is partially dependent on groundwater as part of their bulk water supply, as surface water resources in the area are extremely limited and fully allocated. Due to this, there is lots of pressure on the groundwater resources by industrial development and residential growth. Despite studies being conducted on these aquifer systems since 1976, they are still poorly understood especially with regards to their recharge and discharge processes. This study aimed at providing better insight and understanding on the natural groundwater recharge and discharge processes in order to assist in the better management of groundwater resources in Saldanha Bay. Recharge investigations included a Time Domain Electromagnetic airborne geophysical survey, the assessment of groundwater levels, infiltration tests, hydrochemical analyses as well as stable and radioactive isotope analyses. These methods allowed for the delineation of the geological layers and extent, determination different water quality spatially across the aquifer, determination of flow paths through the saturated and unsaturated zones, identification of inter-aquifer flow as well as different recharge processes in the area. The results of this study showed that is highly likely that the Saldanha Bay Aquifers are mainly recharged via deep flow paths from the Aurora Mountain Range and Moorreesburg region. Investigations also showed that it is unlikely that the Aquifer Systems are recharged by local rainfall due to thick unsaturated sands and low annual rainfall, except for runoff at the foot of granite hills through focused recharge processes. The Berg River, Langebaan Lagoon and the Atlantic Ocean were identified as being the main discharge zones for the area. It is recommended that further hydrogeological investigations are conducted in the Moorreesburg region in order to get a fuller picture of the regional groundwater recharge processes and flow to Saldanha Bay.

Abstract

Groundwater in the West Coast has been utilised for many years as there are not many surface water resources in the area, and is therefore extremely important. Despite studies being conducted on the aquifer systems since 1976, they are still poorly understood especially with regards to their recharge and discharge processes. This means that the amount of water entering and leaving these systems are unknown, which may lead to over abstraction. It is therefore important to investigate these systems to prevent overexploitation of the groundwater as it will have adverse effects for both humans and ecosystems dependent on it. As part of a managed aquifer recharge (MAR) project for the Saldanha Bay Municipality, this study aims at providing better insight and understanding on the natural resource volumes. The study focusses on groundwater recharge, flow paths and discharge processes and aims at quantifying the volume of water related to each. The study will be conducted by identifying aquifer characteristics through Frequency Domain Electromagnetic and Electrical resistivity geophysical methods. Groundwater flow paths through the unsaturated zone, into the groundwater and towards the discharge area will be determined using Chloride Mass Balance calculations and water isotope analyses. The mass balance equations along with isotope analyses will then aid in the identification of natural recharge and discharge areas of the West Coast aquifer systems, as well as quantifying the volume of water moving through each aquifer. Temperature profiles will also be generated to identify specific layers of the aquifer systems and to determine their groundwater-surface water interactions. The aquifer characteristics will be used in numerical models to test the conceptual understanding of recharge and flow through the systems as well as assessing the volumes of water available to the users of the system.

Abstract

The Lower Berg River Aquifer System, situated in the Western Cape province of South Africa, is important to the towns that overlay it, as they rely on the aquifer for water supply, which supplements industrial development and residential growth. This aquifer system is important because surface water resources in the area are finite and fully allocated. Despite studies on the Lower Berg River Aquifer System since 1976, knowledge of the geological layers, recharge and discharge areas, and groundwater flow paths remain limited. This study aimed to provide greater insight and understanding of the aquifer to assist in better management. Investigations included a Time Domain Electromagnetic airborne geophysical survey, the assessment of groundwater levels, infiltration tests, hydrochemical analyses, and stable and radioactive isotope analyses. These methods allowed for the identification of the aquifer’s layers and extent, determination of water quality in different parts of the aquifer, delineation of flow paths through the saturated and unsaturated zones, identification of inter-aquifer flow, as well as different modes of recharge.

Abstract

The quality of groundwater is, in part, controlled by the character of the rock in which it is stored and the water - rock contact time. Rainfall (or recharge) is also a contributing factor as the mineralisation of groundwater increases from east to west across South Africa. It is well established that groundwater is more mineralised than surface water, and with most of South Africa's domestic supplies being sourced from dams, municipal water supplies are generally of low salinity. The exception to this is where water supplies are sourced from groundwater - such as in the Karoo and along the West Coast. The assessment of water potability is based on both the South African National Standard 241 and the Department of Water and Sanitation guidelines, with the former being a legal requirement. Previously, SANS 241 had two classes of water with the lower class only being allowed for a limited period. In 2015, Class II water was done away with and only a single class of water is now specified. While this may have been done to conform to World Health Organisation standards, it disregarded the realities of a resource-strapped South Africa where in large parts the municipal water supplies simply cannot meet the SANS241 standard. This paper examines the implications of the SANS 241 standard on efforts to establish emergency groundwater supplies during the drought impacting the Western Cape Province.

Abstract

A review of groundwater levels in the greater Cape Town area toward the end of the 2017 summer revealed that groundwater levels had not yet been impacted by the below average rainfall over the past two to three years. This is in contrast to the dam levels which reached record lows, necessitating the implementation of strict water restrictions in the city. This buffer between drought and impact to aquifers is well known, and is a characteristic of many groundwater systems. Consequently groundwater can play an important role in managing the effects of drought on urban water supplies. From experiences in implementing groundwater-based drought relief schemes in the southern Cape in 2009 / 2010 and bolstering the water supply to Ladismith in 2013, lessons were learnt in implementing such schemes. This paper identifies ten key issues that require consideration, including the selection of drilling sites, the time it takes to implement emergency groundwater schemes and the need to avoid over-promising at a time when those responsible for water supplies are under increasing pressure from all around them. It is worrying that current planning around managing the drought appears to include little hydrogeological expertise at a decision-making level.

Abstract

Ladismith was established in 1852 at a point where freshwater springs discharge from the Swartberg mountains. Growth of the town required building of the Goewerments Dam in 1920 and the Jan F le Grange Dam in 1978. However, water demand now matches supply, and water shortages are being experienced. Poor management and recent droughts exacerbated the situation. A project was initiated to address problems with the existing water supply and identify additional sources of water. Groundwater is an obvious option, with the regionally extensive Cango-Baviaanskloof fault being located directly north of the town. The west-east trending fault juxtaposes the highly productive Table Mountain Group aquifer with less productive argillaceous rocks of the lower Witteberg Group. This paper presents the results of initial geohydrological exploratory work and examines the role groundwater can play in the future water supply to the town.
{List only- not presented}
KEYWORDS
groundwater, exploration, water supply, Ladismith

Abstract

Iron biofouling in boreholes drilled into the Table Mountain Group has been documented, with groundwater abstracted for the Klein Karoo Rural Water Supply Scheme and irrigation in the Koo Valley hampered by clogged boreholes, pumps and pipes. A similar phenomenon has been experienced at some boreholes drilled and operationalised by the Western Cape Government in response to the onset of the crippling drought in 2017. Monitoring of groundwater levels and pumping rates has yielded data showing a gradual decrease in groundwater level as the pumping rate reduced in response to the pump becoming biofouled, with possibly the same negative impact on the borehole itself. Methods are available to rehabilitate the boreholes (mechanical scrubbing, chemical treatment and jetting), but it seems difficult to destroy the bacteria and re-occurrence of biofouling appears inevitable. In the absence of better solutions, current experience suggests an annual borehole maintenance and rehabilitation budget of R 100 000 per borehole is required. This paper presents three case studies of boreholes drilled into the Malmesbury Group and Table Mountain Group and explores possible triggers of biofouling and its manifestation in the monitoring data.

Abstract

The intangible nature of groundwater provides challenges when trying to understand and quantify the role of groundwater in the hydrology of lakes and wetlands. This task is made even more difficult by the frequent absence of data. However, by adopting a scientific approach, it is possible to assess the hydrogeological contribution

Abstract

For years hydrogeologists have bemoaned the fact the groundwater is often pushed aside in favour of surface water resources being developed for water supply purposes. This is despite the advantages of groundwater being less vulnerable to the impact of drought, generally significantly cheaper to develop and being ubiquitous in character. The intangible character of groundwater was thought to be a major factor in water resources engineers favouring surface water resource development, as well their limited appreciation of the character, exploration, development and management of the resource. But is this really the case? Recent experiences in developing groundwater as an alternative source of water across the Western Cape Province in the face of failing municipal water supplies has highlighted poor communication being a central issue. It was observed that the hydrogeologists had little appreciation of the controls and constraints that govern getting groundwater to the user. Further, their recommendations around the use of groundwater were at times confusing to the uninitiated. Engineers, on the other hand, were found to not adhere to recommended pumping regimes nor appreciate groundwater management requirements. The treatment of groundwater emerged as a constraint that added greatly to the complexity of developing these supplies and requiring ongoing operation and maintenance efforts.

Abstract

In response to the drought which started in 2017, the Western Cape Government set about securing water supplies to key facilities across the province, including the Knysna Hospital. Drilling and testing of two boreholes at the facility indicated it to be viable to establish a groundwater supply of 66 KL/d from the underlying Table Mountain Group Aquifer. Iron concentrations were low and the initial water chemistry analyses pointed to concentrations below the SANS 241 aesthetic limit. However, further to the implementation and operationalization of the groundwater supply schemes, significantly elevated iron concentrations of up to 6 mg/L were observed. This contributed to the difficulty in getting the Knysna Hospital’s alternative water supply operational. Best practice requires that as little oxygen as possible gets introduced into the groundwater system; and this can be achieved by pumping the borehole continuously at the lowest rate possible. It is not always possible to do this under operational conditions when the water demand varies. To counter the iron problem in the potable water and to prevent or retard an increase in the iron concentration in the abstracted groundwater, iron treatment was added to the treatment train and a dual pumping regime was adopted. Using the variable speed drives that had been installed with the pumps, two pumping rates were adopted – with the rate controlled by the level in the treated water storage tank. When the tank level is low, the borehole is pumped at a rate of 0.9 L/s. However, when the level fills to 70%, the pumping rate is reduced to 0.35 L/s and continues pumping even if the tank is full. The modified system was brought into operation in August 2019 and has continued to meet the water demand of the hospital.

Abstract

It has been claimed that Groenvlei, a shallow lacustrine wetland on the southern Cape coast of South Africa, is endorheic. This characterisation was based solely on the inward sloping topography immediately surrounding the wetland and an absence of any surface water outflow. However, four independent hydrogeological tools were used to confirm that water discharges from the wetland into the aquifer along its southern banks, thus invalidating the endorheic characterisation. These tools included contouring of groundwater levels, interpretation of the hydrochemical character of groundwater, electrical conductivity depth profiling and a comparison of natural environmental isotopes in surface and groundwater. This case study supports the need for an integrated approach when characterising and assessing water bodies.

Abstract

Ladismith was established in 1851 where freshwater discharge from the Klein Swartberg Mountains. Growth of the town required building of the Goewerments Dam in 1920 and the Jan F le Grange Dam in 1978. However, water demand now matches supply, and water shortages are being experienced. Poor management and recent droughts exacerbated the situation. A project was initiated to address shortcomings with the existing supply and identify additional sources of water. Groundwater is an obvious option, with the regionally extensive Cango Fault located directly north of  the  town.  The  west-east  trending  fault  juxtaposes  highly  productive  Table  Mountain  Group Aquifers with less productive argillaceous rocks of the lower Witteberg Group. The Alluvial Aquifer is also a target, with a recently drilled DWA monitoring borehole reported to be high-yielding. Drilling and testing of three exploration boreholes drilled into the fault, returned lower than expected borehole  yields,  but  still sufficient  to  contribute  to  the  town’s water  supply  and  merit  further exploration. Boreholes drilled north of Ladismith could be used to increase the existing water supply by 50%.

Abstract

Groundwater monitoring, especially from the end users' point of view, is often considered an add-on, or even unnecessary overhead cost to developing a borehole. Simply measuring groundwater level over time can however tell a story on seasonal rainfall fluctuations as well as the response of an aquifer to the removal of an abstracted volume of water. In this case an artesian borehole of high yield and exceptional quality was drilled in an area of minimal groundwater use because of known poor quality and low yields. The borehole was drilled in two stages with the deeper drilling resulting in significantly higher yields and the artesian flow. Sediment free water, deep artesian water strikes and a lack of flow around the casing led to the conclusion that capping at surface would control the visible artesian flow of 4 L/s. A slight drop in pressure indicated that subsurface leakage may however be occurring. Neighbouring boreholes with automated water level monitoring provided data showing a correlation of drop in water level to the second deeper drilling event. The artesian borehole was yield tested and this too was visible in the water level monitoring data. Hereafter it became apparent that each activity performed at the artesian borehole had an impact on the monitoring boreholes, and that a subsurface leak was causing local depressurization of a semi-confined to confined aquifer. An initial attempt to save the artesian borehole was unsuccessful, resulting in the necessary blocking and abandonment of a high yielding, superior quality borehole. If monitoring data was not available the local drop in water level would never have been noticed with disastrous effect and no evidence for the cause. Simple water level monitoring has averted this and kept neighbourly relations and ground water levels intact