Conference Abstracts

All Abstracts were presented at the Groundwater Conferences

Displaying 151 - 200 of 795 results

Title	Presenter Name	Presenter Surname	Area	Conference year Sort descending	Keywords
Modelling Mine Water Rebound With MODFLOW	Stephen	Fonkem		2015
Abstract A review from international literature discredits the capability of MODFLOW to simulate mine water rebound, due to the nonstandard hydrogeology of underground mine systems. The conceptual understanding is that, after cessation of dewatering, mine water inflow rates and hydraulic heads are related to the void-volume, the differences in head between the water in the mine void and head dependent source, plus natural recharge to the mine voids. The flooded mine voids in the study area are partially underlain by a dolomitic aquifer. The other head dependent source of inflow into the mine voids are the surrounding and overlying Karoo aquifers. Head independent inflow rates into the mine voids, using the long term decant rates, was estimated to be 0.2% of rainfall. During mining, dewatering occurred at approximately 3 to 6 Ml/d. The objective of the model was therefore to simulate the changes head-dependent inflow rates during the rebound period. Analysis of the water level recovery data depicted that once the mine filled up with water, the hydraulic head of the mine rose with the elastic storage coefficient value of the mine void and not the specific retention as conditions changed from unconfined to confined. A three layer model was setup, to represent the two seams mined, separated by a deep Karoo aquifer. The presence of the dolomite on the mine floor was incorporated using the general head boundary package. Head dependent influx from overlying shallow and intermediate Karoo aquifers were simulated using the river package. All model layers were simulated as confined, initially to avoid model convergence issues. The confined setup proved to be the core in simulating mine water rebound with MODFLOW. The modelling exercise showed that storage during rebound is a boundary condition. This simply means that the complexity of mine water rebound can only be achieved in MODFLOW by proper time stepping and dividing the model into different stress periods to represent the changes in storage. Rebound in the study area, modelled with 21 stress periods produced a perfect water level recovery data for the different mine compartments. This was achieved by applying storage capacities of between 0.3 to 0.006 to simulate rebound during unconfined conditions, and values of between 10-4 and 10-5 when the mine void is flooded. The results showed that the inflow from the dolomitic aquifer steadily decreased from 4121 m3/d to 0 m3/d as the mine hydraulic head increased and rose over the head in the dolomitic aquifer. During the same period, inflow from the surrounding Karoo aquifers decreased from 2422 m3/d to less than 10 m3/d. The results of the model were very important in determining the volumes of water to be abstracted from the mine voids for ash-backfilling. {List only- not presented}
Ground Water Management in South Africa: Challenges and Constraints	Courage	Mlambo		2015
Abstract Water scarcity is a growing issue in South Africa. The consumption of water is rising and as such, water is becoming a scarce and valuable resource. Given the circumstances that South Africa is facing, improving the use of ground water could help tackle water scarcity in South Africa. Groundwater has been an important source of water and it can bring socio-economic benefits if properly used. Studies have proved that groundwater resources play a fundamental role in the security and sustainability of livelihoods and regional economies throughout the world. However, in South Africa, groundwater still remains a poorly managed resource and this hinders socio-economic development. This paper examines the current state of ground water management in South Africa. The paper also examines how ground water in South Africa is currently allocated and used, and explores some of the consequences of current water management arrangements. {List only- not presented}
Water balance calculations in a rehabilitated environment	Jean	van Niekerk	Mpumalanga	2015
Abstract A groundwater study at Middelburg Colliery was completed with the emphasis on the investigations into water balances on a rehabilitated coal mining environment. Water balance calculations and water scheduling for collieries in Mpumalanga have become important facets of mine planning over the past years. Opencast mining involves the blasting and removal of rocks overlying the coal layer, which is removed completely. The overburden is then replaced (backfilled) and covered with soil and the terrain is rehabilitated. Rainwater penetrating through the soil into the backfill may become acidic by pyrite and sulphides in the backfill material and ultimately decants on the surface. Decanting generally commences a decade or more after mining ceases. Opencast mining impacts the natural groundwater regime and radically alters the nature of groundwater-surface water interactions. The Department of Water Affairs and Forestry in South Africa requires that mines minimise the release of their polluted water. A groundwater balance is the numerical accounting of the annual recharge to a groundwater resource. It can further be described as a quantitative assessment of the total water resources of a basin over a specific period of time. In a groundwater development program, such a budget is necessary to efficiently manage and utilize the resource. Many of the parameters that determine recharge to an aquifer are measured directly and some are computed from hydraulic characteristics and measured field data. The Middelburg Mine Services has been experiencing excess water problems in past years. Because of the lack of space and the concerns of decanting of mine water out of the rehabilitated pit, it was suggested that mine water treatment should be considered. Geohydrological models were created to determine the decant positions and water volumes for the rehabilitated area. The size of the water treatment plant can then be determined using the calculated decant volumes and positions.
Use Of Environmental Isotopes To Determine Hydraulic Connectivity Across The Surrounding Aquifers At Majuba UCG	Gundo	Mathoho		2015
Abstract Environmental isotope techniques have been successfully applied in the field of hydrogeology over the last couple of decades and have proved useful for understanding groundwater systems. This paper describes a study of the environmental isotopes for Oxygen (18O) and Hydrogen (1H, 2H-Deutrium, 3H-Tritium) obtained from various points in and around the underground coal gasification (UCG) site in Majuba, South Africa. UCG is an alternative mining method, targeting deep coal seams that are regarded as uneconomical to mine. The process extracts the energy by gasifying the coal in-situ to produce a synthetic gas that can be used for various applications. The site consists of shallow, intermediate and deep aquifer systems at a depth of 70m, 180 and 300m respectively. The intermediate aquifer is further divided into the upper and lower aquifer systems. Samples were taken from each aquifer system together with supplementary samples from the Witbankspruit and an on-site water storage dam. A total of 15 samples were submitted for isotope analyses. By investigating the various isotopic signatures from all the samples taken, it will be possible to determine if there are similar or contrasting isotopic compositions by deducing possible water source for each sample due to isotopic fractionation caused by physical, chemical and biological processes. This will also be supported by deducing the mean residence time (MRT) for each water source sampled based on the Tritium data as well as the chemistry data already available for different sources. The chemistry data established linkages between the upper and lower intermediate aquifers.{List only- not presented} Key words: Environmental isotopes, UCG, Water source, Isotope fractionation
Packer Testing and Analytical Modelling For Groundwater Inflow Estimation for Proposed Shafts	Robel	Gebrekristos		2015
Abstract Two ventilation shafts were proposed to be excavated to depths of 100 and 350 m to intersect an underground mine, in the Bushveld Complex. The area is made up of fractured aquifers and the assignment was to identify the exact positions of the permeable zones within the shafts profiles as well as estimate the groundwater inflow rates at every 5 m interval along the shafts profiles. The project was budget and time constrained and therefore the preferred hydrogeological characterisation techniques, particularly the percussion drilling, aquifer testing and numerical modelling could not be conducted. The study was completed by conducting packer tests in HQ sized holes drilled at the exact positions of the proposed shafts. The packer test data was then interpreted using Thiem equation, a modification of Darcy Equation for radial flow, to estimate the steady state inflow rates into the shafts. Transient state flow is more challenging to calculate analytically, as it is time and aquifer storage dependent. However, transient state flow in shafts exists for the first 10 - 15 days only and is short lived. Thereafter, a steady state flow occurs where the rate is nearly fixed for the rest of the life of mine, unless new external stresses, such as mine dewatering, takes place within the radius of influence. Six months later the shafts were excavated and the permeable zones were encountered at the exact positions as predicted using the packer testing. In addition, the inflow rates calculated using analytical modelling was successful in estimating the inflow rates recorded after the shafts were excavated. The packer testing and analytical modelling was therefore effective in assisting the mine to plan the necessary pumps and management plans within the allocated budget and timeframe.
A Study Of Interaction Between Groundwater And Surface Water Using Environmental Isotopes, Hydrochemistry And Feacal Coliform BA	Bongizenzo	Nyawo		2015
Abstract The Table Mountain Group (TMG) Formation in the Uitenhage region, in the Eastern Province of South Africa, has many groundwater users, which could result in the over-exploitation of the underlying aquifer. Consequently, several investigations have been conducted to help in the planning and management of groundwater resources within the region. Traditionally, these investigations have considered groundwater and surface water as separate entities, and have been investigated separately. Environmental isotopes, hydrochemistry and feacal colifom bacteria techniques have proved to be useful in the formulation of interrelationships and for the understanding of groundwater and surface water interaction. The field survey and sampling of the springs, Swartkops River and the surrounding boreholes in the Uitenhage area have been conducted. After full analysis of the study, it is anticipated that the data from the spring, Swartkops River and the surrounding boreholes show interannual variation in the isotope values, indicating large variation in the degree of mixing, as well as to determine the origin and circulation time of different water bodies. ?D and ?18O value for the spring ranges from ?18.9? to ?7.4?, and 5.25? to 4.82?, respectively, while ?D values for borehole samples range from ?23.5? to ?20.0? and ?18O values range from ?5.67? to ?5.06?. In the river sample, ?D values ranges from ?12.1? to ?4.2?, ?18O from ?3.7? to ?1.13?, respectively. The entrobacter aerogen and E.Coli bacteria were detected in the samples. E. coli population for spring and the artesian boreholes indicated low value while the shallow boreholes had higher values are relatively closer to those of the middle ridges of the Swartkops River. The EC values for the spring samples averages at 14 mS/m, borehole samples ranges from 21 mS/m to 1402 mS/m, and surface water ranges from 19 mS/m to 195 mS/m. Swartkops River is an ephemeral, therefore it is expected that diffuse recharge occurs into the shallow aquifer.
Governance and Management of Water Resource in the SA Context - A Review	Kornelius	Riemann		2015
Abstract Water management is a difficult and complex business requiring appropriate institutional arrangements as well as guidance and support from government, which is often unable to act effectively to address day-to-day water resource management (WRM) issues. Theoretically, water as a 'common pool resource' is best managed by users self-organised at a local level and within a basin framework. Water users and other stakeholders have detailed and up-to-date local knowledge as well as an interest in ensuring effective management to share water equitably between different users and to control pollution. This approach is supported by South Africa's National Water Act (NWA), which provides for the establishment of Catchment Management Agencies (CMAs) to perform a range of WRM activities within the framework of a National Water Resource Strategy (NWRS). Hence, water resource management in general and conjunctive use in particular requires cross sector and cross level cooperative governance. Relevant institutions include the DWA at national and regional level, the CMA, if established, provincial departments that might impact on the water resources, water user associations, water services authorities, water services providers, water boards, and individual water users. These institutions are responsible for various activities and often require some level of inter- and intra-institutional cooperation. Ideally, multiple organisations, policies, legislation, plans, strategies and perspectives should be involved in water-related decision-making, which in turns creates complex leadership challenges. Globally, the lack of sustainable groundwater management can be ascribed to poor governance provisions. These include, but are not limited to, institutional arrangements and political will, including fragmented and overlapping jurisdictions and responsibilities, competing priorities, traditional approaches, rights and water pricing systems, diverging opinions, incomplete knowledge, data as well as uncoordinated information systems. Adding the poor operational and maintenance issues, decision-makers often view groundwater as an unreliable resource and are hesitant to make significant investments in groundwater infrastructure and capacity. The recent Worldbank and WRC report on groundwater governance in South Africa revealed that the technical, legal, institutional and operational governance provisions were found to be reasonable at the national level but weak concerning cross-sector policy coordination. At the local level, basic technical provisions such as hydrogeological maps and aquifer delineation with classified typology are in place but other governance provisions such as institutional capacity, provisions to control groundwater abstraction and pollution, cross-sector policy coordination and the existence and implementation of groundwater management action plans are weak or non-existent. It appears from this review that the major hindrances for sustainable groundwater governance and more so for integrated water resource management and conjunctive use scenarios are the discrepancy between groundwater and surface water provisions in the relevant legislation, associated guidelines and their implementation at regional and local, and the lack of skills and clear responsibilities for implementing water resource management actions at municipal level. This is demonstrated with several case studies.
Connecting the dots: Groundwater / surface water interaction along the Letaba River, Limpopo	Tercia	Strydom	Limpopo	2015
Abstract The National Water Act (NWA) 36 of 1998 is regarded as providing a platform for an innovative way of managing the country's water resources. However, demands on the nation's water resources are intensifying as more and more catchments are coming under increasing stress. This may be attributed to significant changes in land-use and poor water resource governance which negatively affects the Environmental Water Requirement (EWR) flows of rivers in many catchments in South Africa. EWR refers to the flow needed by a river to sustain a healthy ecosystem. It is vital that the determined EWR flows are met and to ensure that all water-users receive their allocated water supplies. To ensure effective water management and water provision, it is critical to understand transmission losses considering that it is a key component of the water balance or hydrological budget. Quantitative investigations of transmission losses are necessary in order to calculate flows in a river and appropriately allocate water for different users. The Groot Letaba River situated in the north-eastern region of South Africa is a prime example of a river system where uncertainties in channel losses and gains are complicating effective water management. The Groot Letaba River is a model river where Strategic Adaptive Management (SAM) is currently being implemented to ensure adaptive and sustainable water resource management. This unique approach is facilitated by the institutional interaction between dam operators (from the upstream Tzaneen Dam) and stakeholders including Kruger National Park. However, there are huge uncertainties surrounding natural water losses (e.g. evapotranspiration) or gains (e.g. groundwater discharge) in the real-time model currently being used by dam operators. This study aims at attempting to narrow down the uncertainty by understanding and quantifying the natural hydrological processes between the two dominant land-uses along this river, i.e. agriculture and protected areas. In particular, the project will investigate the hydrological connectivity between groundwater and surface water along the Letaba River. This project will contribute significantly to management strategies by using a precise hydrological approach which will aid in improving estimates of water supply in the Groot Letaba River. Furthermore, this project could contribute to the development of appropriate water management strategies not only in the Letaba catchment but other similar Lowveld catchments as well.
Development of a water resource early warning monitoring system in the South Western Karoo	Zaheed	Gaffoor	Karoo	2015
Abstract POSTER Shale gas, a form of natural gas, has only recently become an economic source of energy. In the last 20 years techniques such as horizontal drilling coupled with hydraulic fracturing, have made possible the extraction of these unconventional hydrocarbon reservoirs. America has used hydraulic fracturing to produce numerous shale gas deposits in the country. This production has satisfied America's energy needs, and essentially made them a net exporter of petroleum. In light of this success South Africa is interested in developing potential economically profitable reserves of shale gas in the Karoo. However media, as well as recent studies, have identified issues with the hydraulic fracturing. These studies have linked hydraulic fracturing to contamination of groundwater resources in active production regions in America. There are fears among experts that the same could happen in the Karoo. This would be devastating to the local ecosystem and human population, as groundwater is the main water resource in the region. However it may still be necessary to proceed with shale gas development for its economic benefits. To ensure that some of the risks of hydraulic fracturing is mitigated, this paper proposes an early warning monitoring system. This system will essentially protect the local groundwater resources by early detection of any indicators that identify hydraulic fracturing contamination. The early warning system will operate by continues monitoring of groundwater parameters, in real time, and compare this regional baselines, and there by identify any changes in the groundwater properties. If a change is linked to a contamination event, the system will warn authorities, thus allowing for rapid response and ultimately ensure conservation of groundwater resources in the region.
Investigation of sources and remedial options for high Fe- content in groundwaters around Lake Sibayi	Zinhle	Mnisi	KwaZulu-Natal	2015
Abstract POSTER High iron (Fe) content in the waters of the aquifers around Lake Sibayi is derived from the geological units in which the aquifers are situated. When drawn to the surface the water precipitates solid iron hydroxide [Fe (OH)3] causing a cloudy reddish colour, a condition which is partly caused by the exposure of the high Fe water to the atmosphere. Fe is an essential ion necessary for the growth of people, animals and plants
Hydraulic Fracturing Of Coal Bed Methane In The Springbok Flats	Gerrit	van Tonder		2015
Abstract It is estimated that the three coal layers in the Springbok Flats contain about 5 TCF of coal bed methane (CBM). Two sedimentary basins, namely the southern Tuinplaas basin and the northern Roedtan basin, exist with coal layers with a total thickness of 7m which occurs mainly in three mayor seams. The coal layers are located between 20 m to more than 600m. Farmers in the Flats are concerned about the environmental impact of fracking the coal beds. They are mostly worried about the risk of groundwater pollution; the drawdown of the water table and the producing of a bad quality water during the mining process. They set up an EPA for the Springbok Flats in 2010 and until now, they have stopped more than 6 companies to conducted exploration (stopped strictly on account of the different laws in SA that were not adhered too). On average, 1000 liters of water is produced for every 2000 cubic feet coal bed methane mined in the USA. The quality of the produced water is not good (with typical Na values of more than 5 000 mg/l) and cannot be used for irrigation purposes. It is thus expected that about 500 million m3 of bad quality water will be produced for every 1 TCF mined in the Flats. This groundwater will be removed from the system and it is expected that a drawdown of up to 30m will be evident at places in the Springbok Flats. There are also a large number of dykes and faults in the Flats which imply that the upward movement of methane and water will be very probable after abandonment of each coal methane well.
Hydrogeochemical Evolution of an Opencast Colliery After Decommissioning - Static vs. Dynamic Prediction	Altus	Huisamen	Mpumalanga	2015
Abstract Static indicator tests, such as acid-base accounting, are commonly used to provide an indication of ARD potential of backfill material in opencast coal mines. This potential for acidity is then commonly incorporated into numerical models, wrongfully, as a constant contamination source with the maximum possible sulphate being released from the pit, ad infinitum, which is, obviously, not the case. Dynamic tests on the other hand, are considered superior, but are expensive and time consuming. The proposed alternative approach is geochemical modelling, illustrated by a case study in the Mpumalanga coal fields. A decommissioned colliery near Carolina, Mpumalanga, was recently confronted with the prediction of the impacts that its backfilled opencasts might have on groundwater in the long term with regards to acid and contaminant generation, demanding a more realistic and well-defined conceptual and numerical approach than the simple minimum screening method. This study utilised the integration of a well-defined conceptual model, mineralogical data, acid-base accounting data, leaching test data, literature and groundwater monitoring data to address the long term hydrogeochemical evolution of groundwater at the colliery, using transiently calibrated geochemical and numerical flow models. Using the mineralogical data available from samples collected, as well as the sulphur content identified by ABA, a standard error was calculated for the abundances of all mineral phases present along with mean weight percentages, defining the likely boundaries of mineral abundances. Using these values along with reactive surface areas calculated from average grain sizes, using a collapsing core model, as well as rate constants from literature, the fluid rock interaction in the leaching tests was simulated and calibrated against leaching test results in the geochemical model, by varying mineral abundances, reactive surface areas and rate constants within the statistically acceptable boundaries. Once a calibrated mineral assemblage was identified using this method, the assemblage was geochemically modelled in the natural environment, after calculation of fluid to rock ratios, which in this case was purely potential backfill porosity vs. recharge due to the natural groundwater level being below the pit base, as well as potential oxygen fugacity. The calculated concentrations of constituents were then introduced into a transiently calibrated numerical flow and transport model via recharge concentrations, to also chemically calibrate this model. The chemical calibration was successful within a 20 mg/L range, illustrating the reliability of the conceptual and geochemical models, but also the reliability of predicted numerical modelling results. Based on the available data and modelling results, the colliery would not have a future impact on groundwater with regards to ARD and metals. However, elevated major cation and anion concentrations are expected, calculated within order of magnitude accuracy, and can be managed according to dynamic and realistic models, instead of a static worst case scenario.
Characterization of Groundwater Potential in the northern parts of the Limpopo Province, South Africa: Results from Integrated G	Peter	Nyabeze	Limpopo	2015
Abstract Characterization of Groundwater Potential in the northern parts of the Limpopo Province, South Africa: Results from Integrated Geophysical Studies across the Sagole and Tshipise Hot Springs. The Sagole and Tshipise hot springs are located in the northern Limpopo Province of South Africa. The geology of the area consists of dykes, dolerite sills, quartzite and undifferentiated meta-sediments. Regional-scale airborne magnetic data and satellite images were used for mapping structures and lithological boundaries in order to identify permeable zones that are associated with thermal groundwater aquifers. Various filtering techniques were used to enhance the magnetic signatures that correspond to structural features. Modeling of airborne magnetic data indicated that the heat source depth was an anticlinal structure at a depth range of 3 km to 5 km. Based on results of interpretation of the magnetic and satellite images, ground follow-up targets were identified. Detailed ground geophysical surveys were carried out across the identified targets using the frequency-domain electromagnetic (EM), electrical resistivity tomography (ERT) and magnetic methods. {List only- not presented} The result of interpretation of magnetic data was combined with two-dimensional modeling EM and (ERT). Modeling of the electrical conductivity of the subsurface layers was constrained using existing borehole data. Interpretation of the airborne magnetic data revealed the presence of number of NE-SW striking lineaments that transect the metasedimentary rocks of the Soutpansberg Supergroup. In addition, these structures are manifested by a number of hotsprings that are aligned along major lineaments. The interpretation of 2D modeling of ERT data revealed a highly conductive layer with a depth ranging from surface to 40 m that may be attributed to elevated moisture content. Two-Dimensional modeling of frequency-domain electromagnetic data was carried out to delineate lateral and vertical variation of electrical conductivity. Electrical conductivity values in the range 50 mS/m to 100 mS/m were obtained, indicating the presence of water bearing zones or fractures. Results of the study have shown that hot water rises to the surface along near vertical faults or fractures. Keywords: Aquifer, geophysics, groundwater, thermal spring
Numerical modelling of groundwater contributions to wetlands	Kai T	Witthueser	Witbank	2015	groundwater flow model
Abstract In order to meet the increasing national and international demand for coal, substantial expansion plans for existing as well as new coal mines were put forward in recent years. The mine developments are often proposed in environmentally sensitive areas and require an appropriate assessment of potential environmental impacts, including impacts on groundwater dependent ecosystems. This paper describes the development of a conceptual and numerical groundwater model as part of a wetland reserve determination in the Witbank coalfields. The model was used to assess potential mining related impacts on the shallow groundwater flow, including surface seepages and spring discharges feeding hill slope and valley bottom wetlands as well as pans. A number of shallow monitoring boreholes were sited, drilled and tested in the focus area around a pan to characterise the shallow perched and weathered aquifers. While these aquifers were generally found to be very low to low yielding, higher yields were encountered in a coarser grit layer intersected by two of the eight boreholes. The grit layer represents a potential preferential groundwater flow path towards the pan and was subsequently further delineated based on the exploration drilling logs from the mine. The different aquifers, the target coal seam, and over 60 mapped hill slope and valley bottom wetlands as well as pans, were incorporated into a numerical groundwater flow model. A free seepage boundary was assigned to the entire surface area to evaluate if the model is able to represent the observed seepages and spring discharges. The simulation of unsaturated flow processes (Richard's equation) was found to be crucial for the representation of discharges from perched aquifers. Following a satisfactory calibration of the model, different open cast mine layouts were then incorporated into the model to assess their impacts on the groundwater contribution to wetlands. The presented quantitative simulation of groundwater contributions towards wetlands and pans based on site specific groundwater investigations and data is considered a best practice example in assessing the groundwater component for a wetland reserve determination.
Platinum mines will leave behind a sustainable legacy which will form a vital building block to meet future water demands	Fanie	Botha		2015	aeration and aerobic storage facilities, Nitrate
Abstract Slightly more out of the box idea is the use of anthropogenic aquifers as storage and chemical conditioners. This concept was first introduce by Eland Platinum Mine(EPM) and reported on in previous papers. At EPM water is used through a serious of natural aeration and aerobic storage facilities to reduce nitrate levels. In 2013 another group introduced pilot studies by virtue of abstraction in support of the water conservation and demand management strategy; which has proven that it could enable the operations to overcome water shortage periods and reduce pressure on Rand Water (RW). The pilot sites would deliver water into the dirty water circuit, but within five to ten years it may further be used to overcome months with zero potable water supply. . In platinum mines the more the aquifers are used the cleaner the water becomes, simply because introduced pollutants are not constant sources and country rock is mostly inert. In the future these aquifers have the potential to become larger storage facilities protected from floods and limited evaporation losses. It is foreseen that some of the mines in the western belt may have more water stored in primary aquifers than water stored within major water dams. Yields from these aquifers for individual aquifers may be up to 450 m3/hour and storage of 18 Mm3. . Why then this paper if we are already using it? The issue is that the true value of these aquifers an only be unlocked when they are used as recharging aquifers and thereby actively storing dirty water within a dirty water aquifer. Once we are able to undertake this the positive environmental gains such of environmental overflows, condition dirty water, reduction of pollution and significant reduction of the use of potable water from RW. {List only- not presented}
Hydraulic fracturing and Water Resources: Separating fact from fiction	Lizanne	Bredenkamp	Karoo	2015	Shale gas, Dolerite Intrusions
Abstract Shale gas in South Africa can be a game changer for the Karoo and South Africa economy but it may have a devastating effect on the environment. The Karoo communities is highly reliable on groundwater for their stock, irrigation and also for domestic use. Knowing the process and the potential impacts of gas-well drilling and fracturing on shallow groundwater systems beforehand different appropriate studies can be done before any hydraulic fracturing can took place in South Africa. The biggest concerns with hydraulic fracturing is that the fracturing fluids will flow and discharge into shallow aquifers due to the high pressure used or the produced water mixed with deep saline water may discharge into the environment. This paper presents a baseline dataset that will be a reference point against which any future changes in groundwater concentrations can be measured. The Karoo basin with its numerous dolerite intrusions make it unique and different from other countries. These dolerite intrusions are associated with high yielding boreholes because of the fractured contact. The Karoo Basin may be under artesian conditions, which imply that any pollutant might migrate upwards in the Karoo. The understanding of key attributes for characterising groundwater of Karoo Aquifers is most importantly the depth to water level, the yield, and groundwater quality.. The understanding of these characteristics will help to close possible legislative loopholes regarding fracturing. This paper establish an interactive database to obtain full understanding of the hydrogeology of the Karoo to be able to quantify how much water is available in the Karoo and who is the users. Not only the quantity of the water in the Karoo, but also quality and age/origin by making use of different isotopes in conjunction with basic macro chemistry. This will allow for a broader picture before any unconventional gas mining in the Karoo takes place and it can be used to identify any future changes in groundwater quality and quantity of the Karoo aquifers.
Stampriet Transboundary Aquifer System	Joyce T	Leshomo	SADC	2015	IAH, Unesco-IHP, transboundary aquifers
Abstract The International Association of Hydrogeologists and UNESCO's International Hydrological Programme have established the Internationally Shared (transboundary) Aquifer Resource Management (ISARM) Programme. This multiagency cooperative program has launched a number of global and regional initiatives designed to delineate and analyze transboundary aquifer systems and to encourage riparian states to work cooperatively toward mutually beneficial, sustainable aquifer development and management. The Stampriet Transboundary Aquifer System was selected as one of the three case studies funded by UNESCO. The Stampriet Aquifer System is located in the arid part of the countries (Botswana, Namibia and South Africa) where groundwater is a sole provider for water resource. The area is characterised by the Kalahari (local unconfined aquifer) and Nossob confined aquifer
Hydrogeology of the Cedarville Flats primary aquifer, Upper Umzimvubu River Basin, South Africa	Molla	Demlie	Eastern Cape	2015	Cedarville Flats alluvial aquifer, Environmental Isotopes, highland recharge, residence time
Abstract The Cedarville Flats aquifer located in the Upper Umzimvubu River Basin, Eastern Cape Province is a source of water supply for an important agricultural region in South Africa. The hydrogeology of this important aquifer is investigated to understand the occurrence, circulation, recharge and quality of groundwater. To this end, local and regional geology, borehole lithological logs, borehole yields, aquifer hydraulic characteristics (including aquifer thickness, water level, hydraulic conductivity, transmissivity and storage coefficient), hydrometeorological, hydrochemicaland environmental isotope data were collected and interpreted. The results show that the alluvial aquifer is made up of sand, gravel, boulders and clay and its thickness reaches 51 meters in places. Median hydraulic properties indicate that the Cedarville Flats primary aquifer is the most productive aquifer compared to the underlying Molteno and Burgersdorp Formations. It has an estimated median borehole yield in the order of 6 l/s as compared to 2 l/s for the Burgersdorp and 1.5 liters for the Molteno Formations. The aquifers in the area receive an estimated 7% of rainfall recharge. The groundwaters of the area are characterized by low ionic concentration with EC and TDS ranging from 235 to 285 ?S/cm and from 65 to 151 mg/l, respectively. The hydrochemical data further indicate a groundwater hydrochemical facies of either Ca-Na-Mg-HCO3 or Na-Ca-Mg-HCO3 highlighting a typically less evolved recharge area groundwater having short residence time and hence less water-rock interaction. Springs and artesian wells show a relatively depleted stable isotope and very low to dead tritium signals indicating high altitude recharge and longer circulation path and residence times compared to wells tapping the water table aquifer which indicate young water with recharge coming from the immediate surrounding area. Similarity in hydrochemical and stable isotope signatures between the streams that drain across the alluvial flats and the shallow groundwaters mean that there is a close interconnection between surface water and groundwater in the area.
Monitored Natural Attenuation on-sites with different geological setting	Bongani	Masombuka		2015
Abstract When considering how to reduce contamination of petroleum hydrocarbons in shallow aquifers, it is important to recognize the considerable capacity of natural processes continuously at work within the secondary sources of contamination. This natural processes are technically referred to as Monitored Natural Attenuation (MNA), a process whereby petroleum hydrocarbons are deteriorated naturally by microbes. This approach of petroleum hydrocarbon degradation relies on microbes which utilise oxygen under aerobic processes and progressively utilises other constituents (sulphates, nitrates, iron and manganese) under anaerobic processes. MNA process is mostly evident when light non-aqueous phase liquids (LNAPLs) has been removed while the dissolved phase hydrocarbon compounds are prominent in the saturated zone. The case studies aim at determining feasibility and sustainability of Monitored Natural Attenuation process at different sites with varying geological setting.
#GWD: The use of social media for science communication	Tercia	Strydom		2015
Abstract For a long time, professionals regarded social media as a superficial, unprofessional platform where internet users would submerge themselves in a virtual world, detached from real-life issues. Slowly, the myths and stigmas surrounding the use of social media has faded as more and more professionals and scientists have realized that these social platforms could be positively exploited in a professional manner which could be beneficial. In a digital age where information at our fingertips is the norm, professionals should co-evolve and ensure that their work is just as accessible and appealing, without the unnecessary jargon. Currently, science is mostly restricted to a very particular audience and conveyed in one direction only. Using a social media platform such as Twitter-which limits messages to only 140 characters-challenges scientists to convey their work in a very concise manner using simpler terminology. Furthermore, it dismisses the usual one-way form of communication by opening dialogue with fellow Twitter users. At conferences, Twitter can serve as a useful tool for active engagement which will not only "break the ice" between delegates but also ensure that important information is communicated to a much wider audience than only those in attendance. This idea was tested at the 2014 Savanna Science Network Meeting held in Skukuza, Kruger National Park, where the hashtag #SSNM was used. More than 63% of the Twitter users who participated in the #SSNM hashtag were actually not present at the conference. These external "delegates" were interested individuals from five different continents and in different professions besides Science. This highlights how social media can be exploited at conferences to ensure that key messages are conveyed beyond the immediate audience at the event.
Blast curtain optimized with a numerical model for TSF seepage control	Robel	Gebrekristos		2015
Abstract Preventing the spread of seepage from tailings storage facilities (TSF's) in groundwater is necessary as it often contains toxic contaminants. Experience has shown that seepage from TSFs is inevitable and that zero seepage remains difficult even with complex liner systems. Multiple seepage control methods are often required to minimise seepage to ensure that environmental regulations are met. Control methods can be grouped into either barrier or collection systems. Barrier systems are used to hinder seepage whereas collection systems are used to intercept seepage. A blast curtain, which is the focus of this article, is a type of collection system that is still at a conceptual level but has seen little or no application worldwide. It works in principle, similarly to a curtain drain, but is typically extended to greater depths depending on the aquifer vulnerability. Numerical modeling has shown that this mitigation measure could add another line of defence for seepage control. The depth and effectiveness of the curtain can be optimized with a numerical model to ensure optimal interception of contaminated seepage around the TSF. Depths of up to 30 m in fractured aquifers have been simulated in this study. A blast curtain is constructed by drilling a set of boreholes around a TSF in close proximity to one another and then fracturing the rock using either explosives or fracking methods to create a more permeable zone. This is then combined with a series of scavenger wells or natural seepage to abstract the contaminated water. Numerical simulation has shown that blast curtains are effective especially if groundwater flow is horizontal. The effectiveness decreases if the vertical flow component is significant. A blast curtain can result in the lowering of the water table, however, local depression is a less of a concern than potential groundwater contamination. {List only- not presented}
High Resolution Site Characterisation (HRSC) In South Africa: Challenges, Successes And Lessons Learned	Samuel D	Mohr		2015
Abstract Inadequate characterization of contaminated sites often leads to the development of poorly constructed conceptual site models and consequently, the design and implementation of inappropriate risk management strategies. As a result, the required remedial objectives are not achieved or are inefficient in addressing the identified risks. Unfortunately, it is all too common to find remedial intervention strategies that run for lengthy periods of time at great cost while generating little environmental benefit due to inadequate characterization of site conditions. High resolution site characterization (HRSC) can provide the necessary level of information to allow for development of rigorous conceptual site models, which can be used to develop and implement appropriate risk management solutions for environmental problems. At the outset, the HRSC approach generally has comparatively higher costs than traditional state-of-the-practice assessment methods. However, the project lifecycle costs can be substantially reduced due to development of optimal risk management strategies. In developing countries where there is a lack of legislation relating to soil and groundwater contamination or, a lack of enforcement of legislation which is present, the long-term liabilities related to contaminated sites are often not immediately apparent to the parties responsible for the sites. This often creates a reticence to employ HRSC techniques due to their increased cost, especially when much of the technology must be imported on a project specific basis from either Europe or the United States. The Authors provide information from several case studies conducted in South Africa where HRSC techniques have been employed to gain a greater understanding of subsurface conditions. Techniques employed have included surface-based geophysical techniques such as electrical resistivity tomography (ERT) and multi-channel analysis of seismic waves (MASW), passive soil gas surveys, deployment of Flexible Underground Technologies (FLUTe?) liners, diamond core drilling, fluid electrical conductivity profiling, downhole geophysical logging tools, the Waterloo Advanced Profiling System (APS), and the use of field laboratories. Several of the techniques required importing equipment and personnel from Europe or the US, and in several case studies, were a first to be employed in South Africa, or the continent of Africa for that matter. The Authors present data obtained using the HRSC techniques from the case studies and elaborate on how the information obtained was used to drive effective decision making in terms of managing long term environmental risks at the various sites, which has been positively embraced by local clients. The authors also highlight key challenges in conducting HRSC investigations in an emerging market context.
Estimating Recharge in the Ermelo Region of Mpumalanga by Comparing Different Water Balance Methods	Morne	van Wyk	Mpumalanga	2015
Abstract South Africa is classified as a semi-arid region where the evapotranspiration sometimes exceeds the annual recharge through rainfall which leads to more drought periods. Combine the before mentioned issue with the water shortages and the impact of mining on water in South Africa, the focus therefore then needs to be placed on the proper estimation of recharge from rainfall and subsequent water management of these water sources. The Ermelo region in Mpumalanga was chosen for the investigation into calculating recharge from rainfall, using water balance methods as the basis on which recharge is calculated. The Ground Water Balance, Saturated Volume Fluctuation, Ground water level fluctuation and Cumulative Rainfall Departure methods was used to calculated recharge and then compare the different methods and their values with each other to compile an accurate estimation of recharge in the area. The data was analysed for each of the methods and then plotted and compared on a simple x-y chart. A new equation was formulated whereby any recharge from the previously mentioned methods can be normalized against the new formula for a more accurate recharge value. As a secondary objective a recharge intensity map was compiled for the area showing the areas of potentially high recharge. Keywords: South Africa, Ermelo, Recharge Estimation, Water balance methods, Ground Water Balance, Saturated Volume Fluctuation, Ground water level fluctuation, Cumulative Rainfall Departure, Intensity maps.
Investigation of the probable infiltration from the wastewater ponds and its impact on the water quality of Pleistocene aquifer	EL-Said	Ahmed AL-Sayed Ragab	El Sadat	2015	Electrical Resistivity Tomography
Abstract 2-D Electrical Resistivity Tomography (ERT) and hydrochemical study have been conducted at El Sadat industrial city. The study aims at investigating the area around the waste water ponds to determine the possibility of water percolation from the wastewater (oxidation) ponds to the Pleistocene aquifer and to inspect the effect of this seepage on the groundwater chemistry. Pleistocene aquifer is the main groundwater reservoir in this area, where El Sadat city and its vicinities depend totally on this aquifer for water supplies needed for drinking, agricultural and industrial activities. In this concern, 7 ERT profiles were measured around the wastewater ponds. Besides, 10 water samples were collected from the ponds and the nearby groundwater wells. The water samples have been chemically analyzed for major cations (Ca+2, Na+, K+, Mg+2), major anions (Cl-, CO3-2, HCO3-, SO4-2), nutrients (NO2-, NO3-, PO4-3) and heavy elements (Cd, V, Cr, Zn, Ni, Cu, Fe, Mn, Pb). Also, the physical parameters (pH, Alkalinity, EC, TDS) of the water samples were measured. Inspection of the ERT sections shows that they exhibit lower resistivity values towards the water ponds and higher values in opposite sides. Also, the water table was detected at shallower depths at the same sides of lower resistivity. This could indicate a wastewater infiltration to the groundwater aquifer near the oxidation ponds. Correlation of the physical parameters and ionic concentrations of the wastewater (ponds) samples with those of the groundwater samples indicates that; the ionic levels are randomly varying and no specific trend could be obtained. Also, the wastewater samples shows some ionic levels lower than those detected in other groundwater samples. Besides, the nitrate level is higher in samples taken from the cultivated land than the wastewater samples due to the over using of nitrogen fertilizers. Then, we can say that the infiltrated water from wastewater ponds are NOT the main controller of the groundwater chemistry in this area, but rather the variable ionic concentrations could be attributed to local, natural and anthropogenic processes.
Numerical Modelling of Groundwater Flow Between a Complex Underground Mine and an Operational Opencast Mine	Altus	Huisamen	Mpumalanga	2015
Abstract The management of groundwater inflows into an opencast colliery in Mpumalanga is normally fairly easily achievable due to low inflow volumes and high evaporation rates. But, when flooded underground mine workings are encountered, groundwater inflow complexity increases dramatically. Understanding, predicting and managing groundwater inflow under these conditions can be challenging and highly complex. While normal opencast inflows are easily modelled these connected mines are pushing numerical models to their limits. This case study aims to illustrate an approach based on a finite difference model that has been used successfully in a South African coal mine. Based on a study at a colliery near Ermelo, Mpumalanga, the understanding and conceptualisation of the aquifer geometry, geological structures, hydrogeology, defunct underground mine geometry and interconnection between opencasts and the underground, proved to be vital, not only in calibration of the model, but also in the construction of the various layers and calculation of flow volumes between the various sources and sinks. This also aided greatly in constant source contaminant transport modelling to trace which mining areas may have a contamination effect on each other or the surrounding aquifer. In constructing the numerical flow model, the underground mine geometry was found to intersect various layers in the MODFLOW based model and pinching out in some areas. Due to the requirement of MODFLOW that layers should be continuous with no pinchouts to the model boundaries, this presented a notable challenge in the model construction. Therefore, mine geometry was divided into various slices, fitting within the hydrogeological layers, but still retaining the original geometry. The layers were then further divided laterally using different materials to represent the mine hydraulic properties and aquifer properties respectively, ensuring that the lateral distribution of materials also represents the underground mine geometry accurately. Using this model construction, the calculated mean residual head for the simulation of the current situation was found to be less than 3m while the simulation of the current mining situation with no underground mine present, yielded a mean residual head of approximately 10m. Additionally, inflows measured in the opencast penetrating the underground were measured at approximately 1000m3/d while the calibrated model calculated inflows of 1160m3/d, while simulating the current mining situation including the defunct underground. The current decant from the defunct underground, to the southeast of the site, was calculated as 1.9 L/s by the model while the measured rate was just over 1 L/s. Also, as expected, the dewatering of the opencast penetrating the flooded, defunct underground mine, was calculated to predominantly impact an underground mine compartment, isolated by underground seals, as opposed to the aquifer, which has a much lower hydraulic conductivity. {List only- not presented}
Using gravity anomalies from GRACE to estimate changes in groundwater storage in the Vaal River Basin	Khuliso	Masindi		2015
Abstract The Gravity Recovery and Climate Experiment (GRACE) satellites detect minute temporal variation in the earth's gravitational field at an extraordinary accuracy, in order to make estimation of the total water storage (TWS). GRACE provides a unique opportunity to study and monitor real time water variation in the hydrologic stores (snow, groundwater, surface water and soil moisture) due to increases or decreases in storage. The GRACE monthly TWS data are being used to estimate changes in groundwater storage in the Vaal River Basin for a period (2002 to 2014). The Vaal River Basin has been selected, because it is one of the most water stressed catchments in South Africa; it is well-renowned for its high concentration of industrial activities and urbanized zones. Therefore, in order to meet future water demands, it is critical to monitor and calculate changes in groundwater storages as an important aspect of water management, where such a resource is a key to economic development and social development. Previous studies in the Vaal River Basin were mostly localised focusing mainly on groundwater quality and to a lesser extent groundwater assessment. Hydrological models have been generated for the whole of South Africa, but many of these models do not take into account the groundwater component. Thus, there is a significant gap in the understanding of surface and ground water dynamics in the Vaal River Basin. The paucity of data and monitoring networks are often the limitation in calculating changes in water storage over a large area, particularly in Africa. In this scenario GRACE is a good approach to estimate changes in hydrological storages as it covers large areas and generates real time data. It does not require information on soil moisture, which is often difficult to measure. The accuracy of calculating change in groundwater storage lies in the processing of GRACE data and smoothing radii. For this study, smoothing radii of 1500, 900, 500, 300, 150 and 1 km are used. Currently the associated error with different smoothing radii is unknown. The preliminary results indicate that the study area experienced a loss in TWS of -31.58 mm equivalent water height over a period of 144 months in TWS at 300 km smoothing radius. The change in groundwater storage is calculated by incorporating hydrologic components to the TWS (work in progress). The results obtained from this study will be compared to existing hydrological models and results generated from models applicable to the semi-arid region of South Africa. It is anticipated that this satellite observation technique, GRACE, will provide an accurate estimate of change in groundwater storage. Furthermore, it will show the usefulness of satellite based techniques for improving our understanding of groundwater dynamics, which will improve water management practices.
Estimation of representative transmissivities in heterogeneous aquifers	Fanie	de Lange		2015
Abstract The so-called apparent increase of transmisivity (T) or hydraulic conductivity (K) with scale is an artifact and does not exist in the field. The reason for the apparent increasing of T with scale is due to the use of the "not applicable" random log Gaussian stochastic models that are used by geohydrologists. In the petroleum field, which uses deterministic methods, the apparent increase of T with aquifer volume does not occur. Groundwater practitioners have to change their view and use models that do not show this effect. By using intuitive inspection of geological, fracture and connectivity data as well as real pumping test data, this paper shows that up-scaling must be performed with an exponential decaying function, where T always decreases with scale . Two types of heterogeneities exists namely a.) horizontal and b.) vertical. Connectivity between fractures is extremely important in both cases, but it is only in semi-confined and watertable aquifers that the vertical heterogeneities are really important (typical case of fracture dewatering) {List only- not presented}
Groundwater chemical evolution at an underground coal gasification pilot plant in Majuba	Lehlohonolo	Mokhahlane	KwaZulu-Natal	2015
Abstract Underground coal gasification (UCG) is technology that aspires to exploit coal reserves using in-situ gasification. This mining method gasifies coal seams while extracting a syngas that can be used for electricity generation. Since the bulk of this process occurs in the subsurface, there is a possibility of impacting on regional groundwater quality. This paper seeks to assess this impact on groundwater across different aquifers while taking into account the chemical evolution of these aquifers. Three aquifer systems were identified namely the shallow, intermediate and the deep aquifer which comprises of the coal seam. The water chemistry was reviewed over a two year period during which the gasifier was still active. Alkaline conditions were prevalent across the three aquifers with minor seasonal changes. High levels of dissolved solids were observed especially in the deep aquifer but the quality of water was poor even in background samples. The impact of gasification does have small variation in already unusable water in the deep aquifer which was also characterized by low hydraulic conductivity. Higher hydraulic conductivity values were established in the shallow aquifer. No significant groundwater chemistry change was detected in this aquifer as a result of gasification process.
Interannual variability in rainfall isotope composition as a tracer of spring water flow.	Roger E	Diamond	Western Cape	2015	Table Mountain Group, springs, rainfall isotopes
Abstract Table Mountain reaches 1086m elevation, the upper half of which comprises Table Mountain Group (TMG) quartzite with extensive fracture porosity. The lower half of the mountain comprises a mixture of Cape Granite intruded into Malmesbury Group metapelites, both of which are poor aquifers, but are in places overlain by scree slopes predominantly composed of TMG quartzite boulders. The region experiences a Mediterranean climate with warm, dry summers and cold, wet winters, with rainfall ranging from 600-1600mm/a depending largely on proximity to the mountain. Several springs issue from the slopes of the mountain, ranging in elevation from 15-410masl and in flow from non-perennial to 30L/s. Water chemistry reveals very little about spring water flow, as the waters have very low dissolved solids. Samples of 10 of these springs were taken twice per year for 3 years while rainwater was sampled at 120masl at the University of Cape Town (UCT) and at 1074masl at the Upper Cableway Station. These samples were analysed for oxygen and hydrogen stable isotope composition, mostly by mass spectrometer, but also by laser spectroscopy. The isotope results reveal an altitude gradient between the two rainfall stations of -0.075?/100m for ?D and -0.48?/100m for ?18O. Employing this isotope gradient, the average recharge altitude for the springs is 304masl, compared to an average discharge altitude of 156masl. Using this difference in altitude and the average slope of the terrain, a typical flow path of 1km from recharge to discharge point can be derived. Additionally, there are shifts in the weighted annual mean isotope composition of rainfall at UCT. For the years 2010-2012, the shifts are paralleled by similar shifts in the mean isotope composition at the springs for each of those years. This suggests rainfall discharges in the same winter season it has been recharged. In combination with the evidence for long term reliability of some of the springs over the dry season and during droughts, this suggests a layered flow of groundwater in the scree aquifer, allowing both long term steady discharge of deeper groundwater, as well as short term discharge of recently recharged rain. In combination with the flow path derived above, hydraulic conductivities in the realm of 10-20m/d can be calculated for the scree aquifers.
Possible recharge areas for two of the Lower Berg aquifers units, Western Cape	Nicolette	Vermaak	Western Cape	2015	groundwater recharge
Abstract The question about the natural recharge areas for two of the Lower Berg river aquifers units, Elandsfontein Aquifer unit and Langebaan Road aquifer unit, has been keeping geohydrologists working in the area without a definite answer. Tredoux and Engelbrecht have postulated that it must be from the higher grounds around Hopefield, while Woodford hinted that an offshoot fault from the Coleso fault system could also cause the systems to be recharged from the Darling hills. Isotope studies had been done for the proposed Hopefield recharge area, but none has so far been done for the possible Darling recharge system. This paper will look at the studies done up to date and evaluate the data available for the boreholes drilled in the area in an attempt to get a clearer understanding of the two possibilities. It will also identify possible gaps in our knowledge of the area and the steps that would make it possible to fill in the gaps.
Characterise and quantify contamination within the Crocodile (West) and Marico Water Management Areas, South Africa	Chazanne	Allison	Hartebeespoort Dam	2015	Heavy metal, chemical fingerprint, geochemistry
Abstract Define chemical signatures from river waters collected in the Crocodile (West) and Marico Water Management Areas, South Africa. Samples were analysed for anion complexes using Ion Chromatography (IC) and major and trace element chemistry using quadrupole Inductively Coupled Plasma-Mass Spectrometry (q-ICP-MS). Results are used to define the various chemical signatures resulting from activities within the study area which include mining, agriculture, industry, residential and domestic, and recreational usage and to differentiate the 'background' that arises from the natural geological heterogeneity. The aim of this characterisation is to fingerprint the chemical signatures of various anthropogenic activities irrespective of background. Results from this investigation have been mapped using GIS to visualise the data across the study area. Based on the results, the contamination sources within the area can be identified and ranked in terms of their contribution to the total effective contamination received at Hartebeespoort Dam. {List only- not presented}
'Best Practice' Approach To Undertaking Detailed Groundwater Impact Assessment Studies For Proposed Solar Energy Plants	Sheila	Imrie	Jacobsdal, Free State	2015	Solar energy, EIA, best practice, groundwater management
Abstract South Africa is a country at the forefront of the solar energy revolution. Each solar energy plant implementation results in further supply of clean renewable energy to the South African electric grid, thus playing a part in helping South Africa meet its renewable energy targets, in addition to stimulating long-term economic development and creating new jobs. Active solar techniques include the use of photovoltaic systems, concentrated solar power and solar water heating to harness the energy. Particular focus has recently been on the use of concentrated solar power technology which is better able to address the issues of scalability and electric storage. The process includes the use of a liquid salt solution and also requires a reliable water source. When applying for a new solar energy plant, a geohydrological assessment is required to inform the Environmental Impact Assessment. SolarReserve South Africa (Pty) Ltd responsibly take this one step further by requesting detailed geohydrological assessments including drilling and field testing, numerical modelling and simulations, and detailed impact analysis. Of particular consideration in these assessments is the potential for groundwater to meet the plants water needs, as well as the assessment of risk and potential groundwater contamination impact from failure in the lining of the evaporation ponds. This paper describes the 'best practice' approach that has been formulated and undertaken for some previously proposed sites, and is now recommended for future use in the groundwater impact assessment of future proposed solar energy plants in South Africa. It makes use of a SolarReserve case study example, located at the farm Kalkaar near Jacobsdal in the Free State Province, to explain the main steps in the process and how the results of using this approach are important inputs in the assessment of impacts, decision-making regarding go/no-go, technology used, infrastructure and site layout, and responsible management and monitoring of the groundwater in the future.
The Complexity of Baseline Monitoring in Unconventional Gas Projects	Richard	O'Brien	Karoo	2015
Abstract The subsurface has been likened to a maze due to the intricate and often disconnected pathways contained even in unconsolidated and relatively homogeneous aquifer systems. The weathered fractured aquifers in the Karoo offer unique challenges to those planning monitoring campaigns and provide opportunities for the research community to identify innovative solutions. Careful thought needs to be given to the objectives of monitoring as these can change the requirements of the work. Other important considerations are the location and design of monitoring wells which often needs to be tailored to site specific conditions while the selection of determinands to be analysed introduces yet another layer of complexity. These include questions around the relevant detection limits, representative sampling methods and a host of other aspects. Following prescribed approaches designed for managing traditional industrial processes may not be relevant even though these approaches are based on decades of research and learning from past experience, both good and bad. Careful consideration of the technical detail in advance of beginning any monitoring in the field is essential and even then, as in any hydrogeological assessment, a level of uncertainty will always remain. This presentation will cover the status of planning work on Karoo aquifer characterisation and geochemical assessment of the ambient or baseline conditions. Significant effort continues to be made to tailor fieldwork to site specific conditions and be ready to collect a representative data set when conditions allow. {List only- not presented}
Investigating the influence of fine ash leaching in a tailings dam on the underlying aquifers	Josepha	Zielke		2015
Abstract Fine ash is a by-product generated during coal combustion and gasification. It is often disposed of as slurry and stored on tailings dams over long periods of time, where it is exposed to weathering. Weathering causes soluble ions to go into solution and to be transported along preferred pathways through the tailings dam. This study was conducted to assess the leaching behaviour of fresh and weathered fine ash and to evaluate the impact on the underlying aquifers. A kinetic test was conducted over 21 weeks to analyse the leachate composition of progressively-aged fine ash and to calculate the release rates for major ions and trace metals of environmental concern. The leachate composition was compared to the groundwater composition of the underlying aquifers to assess the environmental impact of long term ash leaching. The study showed that the release rate of Ca decreased with increasing depth and age of the fine ash. The release rate of Mg, Na, K, Mo, V, Ba, Cr and Mo increased slightly between 22 m and 28 m in the tailings dam. Aluminium had a decreasing release rate from 28 m depth onwards. It was concluded that fine ash leaching influenced the water composition of the underlying aquifers because similarities were observed in the water type trend. The shallow aquifer south of the tailings dam contained Ca/Mg/SO4/Cl/NO3 water with a significant increase in Ca, Mg, Na, Cl and SO4 over time. These ions were expected to be found in the pollution plume due to their high release rate observed in the fine ash. The deeper aquifer northeast and south of the tailings dam showed a reverse trend of decreasing Ca, Mg and NO3 with time. This is possibly due to decreasing release rates in the aging fine ash and due to the cation exchange capacity (CEC) of the aquifer retarding the movement of Ca and Mg in the pollution plume. The shallower aquifer northwest of the tailings dam showed a decrease in Ca and Mg but an increase in K, while the water composition of the deeper aquifer increased in Ca, Mg, Na, K and Cl. This indicates that the pollution plume moved from the shallower to the deeper aquifer and that most of the Ca and Mg content in the fine ash has been leached from the tailings dam after more than 30 years of storage. The study confirmed that leaching of elements from the fine ash tailings dam had a negative influence on the underlying aquifers and that the clay lining was not sufficient in retaining the leachate.
Groundwater and mining on the West African shield: application of mineralogical and weathering profiling	David	Love	West Africa	2015
Abstract The Birimian and Tarkwaian rocks of the Paleoproterozoic West African Shield host some of the most important gold reserves in the world, with Ghana the world's 10th largest gold producer and the region collectively producing more gold than all but five countries in the world. The gold was deposited during successive hydrothermal sulphide alteration events, which were channelled by shear zones and thrusts formed during the regional progressive Eburnean tectono-thermal deformation event. The hydrothermal fluids were auriferous and sulphide-rich, resulting in two distinct types of gold and sulphide mineralisation: (1) gold-bearing quartz- and quartz-ankerite veins, occurring in NNE-SSW trending shear zones or thrust folds, usually in Birimian metasediments, with associated sulphides deposited on the fragmented wall rock and (2) disseminated gold-bearing pyrite and arsenopyrite, occurring in halos within the same shear zones or thrust folds as the quartz veins. The sulphidic nature of the gold deposit leads to a high risk of acid rock drainage (ARD). During operations, inflowing groundwater may carry the ARD into underground workings and opencast pits. Post-closure, as the groundwater rebounds, there is a risk of acidic pit lakes forming or acidic decant of underground mines. However, the occurrence of ARD in such systems can be predicted by a combination of weathering profiling, mineralogical profiling and conventional acid base accounting (ABA). The weathering profile can be divided into three zones, readily distinguishable in borehole core: (i) Oxide Zone, from which both the acid-generating sulphide minerals and the acid-neutralising carbonate minerals have been largely leached, (ii) Transitional Zone, from which the carbonate minerals have been largely leached but the sulphide minerals remain, (iii) a Fresh/Primary Zone, where both sulphide and carbonate minerals occur. The Oxide Zone is generally non acid-generating, the Transitional Zone is acid-generating and the Fresh Zone is potentially acid-generating, depending upon the balance of sulphide vs carbonate minerals. Mineralogical profiles can be prepared from the relative abundance of macroscopic sulphide and carbonate minerals in the borehole core, again providing an assessment of ARD risk. Combined logs can then be prepared from these profiles with acid-generation and neutralisation data from ABAs, illustrating in space where the highest ARD risk zones are located. Using this information, groundwater and mine water management options can be developed for operations and closure, such as prioritisation of open pit backfilling or which levels of an underground mine water should be preferentially excluded from.
A framework for conjunctive use at local government level	Kornelius	Riemann		2015	Conjunctive use, IWRM, framework
Abstract Conjunctive use of surface water and groundwater resources offers huge advantages to municipalities. It can significantly increase the resilience of the municipal water supply to drought situations. Optimal use and integration of different sources would result in a yield of the total system that is higher than the combined yield of each source separately. However, integrated water resource management (IWRM) in general and planned conjunctive use of both groundwater and surface water resources in particular have not been successfully implemented yet in South Africa. Six selected case studies of municipalities across South Africa, which utilize both surface water and groundwater for the water supply to specific towns, have undergone a review of their current water governance provisions wrt groundwater, surface water and conjunctive use. The review has been based on a questionnaire for direct interaction with the local government officials, supported by other readily available documents such as municipal Integrated Development Plan (IDP) and Water Services Development Plan (WSDP), municipal websites, Blue Drop and Green Drop Assessment Reports, Municipal Strategic Self-Assessment (MuSSA) and the All Towns Reconciliation Strategy reports. These case studies reveal the different institutional arrangements for water resource management and water supply services that exist in municipalities. The advantages and disadvantages of the institutional arrangements for each case study have been determined. Problem areas identified include split of responsibilities for surface water and groundwater resources between different institutions, lack of financial and HR support within the government spheres, lack of formal and structured stakeholder engagement, insufficient monitoring for both sources, inter alia. Based on this comparative study of different municipalities, a draft framework of optimal institutional arrangements and governance provisions at local government level is developed to support the integration and optimisation of surface water and groundwater supply. The proposed framework is based on three pillars; viz. leadership and clear structures within the responsible local government institution, formal engagement with all relevant internal and external stakeholders and a sufficient monitoring network that supports the stakeholder engagement and decision making.
In situ iron removal: Innovative option for preventing production borehole clogging	Kate	Robey	Karoo	2015
Abstract Worldwide many aquifer systems are subject to hydrochemical and biogeochemical reactions involving iron which limit the sustainability of groundwater schemes. This mainly manifests itself in clogging of the screen and immediate aquifer with iron oxyhydroxides resulting in loss of production capacity of the borehole. Clogging is caused by chemical precipitation and biofouling processes which also manifests in South African wellfields such as the Atlantis and the Klein Karoo Rural Water Supply Scheme. Both wellfields have the potential to provide a sufficient, good quality water supply to rural communities, however clogging of the production boreholes has threatened the sustainability of the scheme as quality and quantity of water is affected. Repeated rehabilitation of the affected boreholes using techniques such as the Blended Chemical Heat Treatment (BCHT) method does not provide a long term solution. Such treatments are costly with varying restoration of original yields achieved and clogging recurs with time. Currently, the research, management and treatment options in South Africa have focused on the clogging processes which are complex and site specific making it extremely difficult to treat and rectify. This project attempts to eliminate the cause of the clogging which is elevated concentrations of dissolved iron. High iron concentrations in groundwater are associated with reducing conditions in the aquifer allowing for dissolution of iron from the aquifer matrix. These conditions can be natural- and/or human-induced. Attempts to circumvent iron clogging of boreholes have focussed on increasing the redox potential in the aquifer to prevent dissolution and facilitate fixation of the iron in the aquifer matrix. Various in situ treatment systems have been implemented successfully overseas for some time. However, in South African in situ treatment of iron has only been a theoretical approach. Based on experience from abroad the most viable option to research and apply elimination of ferrous iron in South African aquifer systems would be through the in situ iron removal treatment The objective of this paper is to set out the experience from abroad and to outline the initial results of this treatment. A pilot plant for testing the local applicability of this method was constructed at the Witzand wellfield of the Atlantis primary aquifer on the West coast of South Africa.
Governing Groundwater Wisely To Provide For Current And Future Generations.	Zine	Matshakeni		2015
Abstract POSTER About 97% of the earth's freshwater fraction is groundwater, excluding the amount locked in ice caps (Turton et al 2007) and is often the only source of water in arid and semi-arid regions and plays a critical role in agriculture, this dependency results in over-exploitation, depletion and pollution (Turton et al 2007). Groundwater governance helps prevent these issues. CSIR defines governance as the process of informed decision making that enables trade between competing users of a given resource, as to balance protection and use in such a way as to mitigate conflicts, enhance security, ensure sustainability and hold government officials accountable for their actions (Turton et al 2007). Realising the issues of groundwater governance is a requirement for developing policy recommendations for both national and trans-boundary groundwater governance. Groundwater level decline has led to depletion in storage in both confined and unconfined aquifer systems (Theesfeld 2010). There are about six institutional aspects, namely voluntary compliance, traditional and mental models, administrative responsibility and bureaucratic inertia, conflict resolution mechanisms, political economy and information deficits (Theesfeld 2010). Each of these aspects represents institutional challenges for national and international policy implementation. Traditional local practices should not be disregarded when new management schemes or technological innovations are implemented. The types of policies that impact governance include regulatory instruments, economic instruments and voluntary/advisory instruments. Regulatory or command and control policy instruments such as ownership and property right assignments and regulations for water use are compulsory. Economic policy instruments make use of financial reasons such as groundwater pricing, trading water right or pollution permits, subsidies and taxes. Voluntary /advisory policy instruments are those that influence voluntary actions or behavioural change without agreement or direct financial incentives. These are ideal types though no policy option ever relies purely on one type of instrument. The aim of these policies is to have an impact on governance structures (Theesfeld 2010). The national water act (1998) of the Republic of South Africa is not widely recognized as the most comprehensive water law in the world even though it is the highlight of socio-political events; socially it is still recent in most sites although the law was implemented 15 years ago (Schreiner and Koppen 2002). Regulations for use include quantity limitations, drilling permits and licensing, use licenses, special zone of conservation and reporting and registering requirement. In general when drilling and well construction are done commercially they increasingly fall under the scope of regulatory legislation. This paper will focus mostly on traditional and mental models; procedures that a certain community is dependent on should be taken into account before replacing with technological advanced tools. Consultation of the public can cause conflicts which lead to poor groundwater management. Keywords: Groundwater governance, policy, policy instruments.
Investigating the influence of fine ash leaching in a tailings dam on the underlying aquifers	Paul JH	Lourens		2015	primary aquifers
Abstract Groundwater in South Africa is the most important source of potable water for rural communities, farms and towns. Supplying sufficient water to communities in South Africa becomes a difficult task. This is especially true in the semi-arid and arid central regions of South Africa where surface water resources are limited or absent and the communities are only depended on groundwater resources. Due to a growing population, surface water resources are almost entirely being exploited to their limits. These factors, therefore, increases the demand for groundwater resources and a more efficient management plan for water usage. For these reasons, the relation between the geology and geohydrology of South Africa becomes an important tool in locating groundwater resources that can provide sustainable quantities of water for South Africans. It was therefore decided to compile a document that provides valuable geohydrological information on the geological formations of the whole of South Africa. The information was gathered by means of interviews with experienced South African geohydrologists and reviewing of reports and articles of geohydrological studies. After gathering the relevant information, each major geological unit of South Africa together with its geohydrological characteristics was discussed separately. These characteristics include rock/aquifer parameters and behaviour, aquifer types (primary of secondary), groundwater quality, borehole yields and expected striking depths, and geological target features and the geophysical method used to locate these targets. Due to the fact that 90 % of South Africa's aquifers are classified as secondary aquifer systems, groundwater occurrence within the rocks of South Africa is mainly controlled by secondary fractures systems; therefore, understanding the geology and geological processes (faulting, folding, intrusive dyke/sills & weathering) responsible for their development and how they relate is important. However, the primary aquifers of South Africa (Coastal Cenozoic Deposits) should not be neglected as these aquifers can produce significant amounts of groundwater, such as the aquifer units of the Sandveld Group, Western Cape Province. Drilling success rates and possibility of striking higher yielding boreholes can be improved dramatically when an evaluation of the structural geology and geohydrological conditions of an area together with a suitable geophysical method is applied. The ability to locate groundwater has been originally considered (even today) a heavenly gift and can be dated back to the Biblical story of Moses striking the rock to get water: "behold, I will stand there before thee there upon the rocks thou shalt smite the rock and there shall come water out of it" (Exodus 17:6).
Validating Hydrological Models In A Data Scarce Country- Getting The Right Results For The Right Reasons.	Jane L	Tanner		2015
Abstract This study explores some of the principle issues associated with quantifying surface and groundwater interactions and the practical application of models in a data scarce region such as South Africa. The linkages between the various interdependent components of the water cycle are not well understood, especially in those regions that suffer problems of data scarcity and there remain urgent requirements for regional water resource assessments. Hydrology (both surface and groundwater hydrology) is a difficult science; it aims to represent highly variable and non-stationary processes which occur in catchment systems, many of which are unable to be measured at the scales of interest (Beven, 2012). The conceptual representations of these processes are translated into mathematical form in a model. Different process interpretations together with different mathematical representations results in the development of diverse model structures. These structural uncertainties are difficult to resolve due to the lack of relevant data. Further uncertainty is introduced when parameterising a model, as the more complex the model, the greater the possibility that many different parameter sets within the model structure might give equally acceptable results when compared with observations. Incomplete and often flawed input data are then used to drive the models and generate quantitative information. Approximate implementations (model structures and parameter sets), driven by approximate input data will necessarily produce approximate results. Most model developers aim to represent reality as far as possible, and as our understanding of hydrological processes has improved, models have tended to become more complex. Beven (2002) highlighted the need for a better philosophy toward modelling than just a more explicit representation of reality and argues that the true level of uncertainty in model predictions is not widely appreciated. Model testing has limited power as it is difficult to differentiate between the uncertainties within different model structures, different sets of alternative parameter values and in the input data used to run a model. A number of South African case studies are used to examine the types of data typically available and explore the extent to which a model is able to be validated considering the difficulty in differentiating between the various sources of uncertainty. While it is difficult to separate input data, parameter and structural uncertainty, the study found that it should be possible to at least partly identify the uncertainty by a careful examination of the evidence for specific processes compared with the conceptual structure of a specific model. While the lack of appropriate data means there will always be considerable uncertainty surrounding model validation, it can be argued that improved process understanding in an environment can be used to validate model outcomes to a degree, by assessing whether a model is getting the right results for the right reasons.
Application of GIS Mapping Techniques to Classify Karoo Aquifers	Mildred	Goes		2015
Abstract POSTER As the National Water Act has evolved to provide for more effective and sustainable management of our water resources, there has been a shift in focus to more strategic management practices. With this shift come new difficulties relating to the presentation of sensitivity issues within a spatial context. To this end it is necessary to integrate existing significant spatial layers into one map that retains the context, enables simple interpretation and interrogation and facilitates decision making. This project shows the steps taken to map and identify key groundwater characteristics in the Karoo using Geographic Information Systems (GIS) techniques. Two types of GIS-based groundwater maps have been produced to assist with interpretation of existing data on Karoo Aquifer Systems in turn informing the management of groundwater risks within Shell's applications for shale gas exploration. Aquifer Attribute and Vulnerability maps were produced to assist in the decision making process. The former is an aquifer classification methodology developed by the project team, while the latter uses the well-known DRASTIC methodology. The overlay analysis tool of ESRI's ArcGIS 10.1 software was used, enabling the assessment and spatial integration of extensive volumes of data, without losing the original detail, and combining them into a single output. This process allows for optimal site selection of suitable exploration target areas. Weightings were applied to differentiate the relative importance of the input criteria. For the Attributes maps ten key attributes were agreed by the project team to be the most significant in contributing to groundwater/aquifer characteristics in the Karoo. This work culminated in the production of a series of GIS-based groundwater attributes maps to form the Karoo Groundwater Atlas which can be used to guide groundwater risk management for a number of purposes. The DRASTIC model uses seven key hydrogeological parameters to characterise the hydrogeological setting and evaluate aquifer vulnerability, defined as the tendency or likelihood for general contaminants to reach the watertable after introduction at ground surface.
The use of Hydrogeochemical Analysis Model to assess groundwater quality for drinking and agricultural use in Heuningnes Catchment	Portia Leah	Mokoena	Western Cape	2015
Abstract POSTER The study aims at using hydrogeochemical model to establish groundwater quality in shallow and deep aquifers in Heuningnes Catchment which is located within Bredasdorp in the Western Cape Province. The catchment is positioned at latitude of 34o42'50"S and longitude 20o07'13"E. The area is about 1400km2 has vleis, lakes and pans and its predominant formation is sedimentary rocks of Table Mountain and Bokkeveld Groups sitting on a crystalline basement of the Malmesbury granites. Comprehensive characterisation of the hydrogeochemical evolution is lacking and the current study argues that the use of hydrogeochemical Analysis Model (HAM) has potential to establish water-type, water source, water mixing/rock-water interactions, salinity, saturated adsorption ratio and hardness-softness of that predominant hydrochemical facies in the study area in addition to assessing the compliance of such water to WHO and South Africa water quality guidelines for drinking and agricultural use. Groundwater samples will be collected in 45 different locations (wellpoints/shallow wells, boreholes and wetland as end member) using in-situ sampling techniques to measure pH, electrical conductivity, total dissolved solids and temperature. Turbidity, total hardness, calcium, chloride and bicarbonate will be analysed using analytical chemistry methods including titrimetric method. Magnesium, potassium, sodium, nitrate and phosphate analysed by Atomic Absorption Spectrophotometer whilst sulfate will be analysed using spectrophotometer. Graphical methods such as piper diagram will be used to present the results to determine water-type, water freshness/hardness, water source, water mixing/rock-water interactions, salinity, saturated adsorption ratio and hydrogeochemical processes. The results from the present study are envisaged to inform formulation of science-based interventions strategies that will lead to sustainable utilization and management of the water resources in the area to improve the livelihoods of people and environmental integrity. Key words: Groundwater quality, Heuningnes Catchment, hydrogeochemical Analysis Model, Piper diagrams, Hydrogeochemistry
Knowledge comes with trial, error and time: The Langebaan Road story	Nicolette	Vermaak	Western Cape	2015
Abstract When planning an experimental setup in the laboratory, it is very important and possible to control all the variables so that one can manipulate particular variables at a given time. Experimental setups under natural conditions could be a challenging task. The success of an experiment depends to a large extent on the correct understanding of the functioning of a natural system. If the conceptual understanding of the natural system is erroneous, it is likely that unexpected results could be achieved. This was the case with the artificial recharge pilot project that was done in 2008 and 2009 at the Langebaan Road wellfield just outside Hopefield in the Western Cape. Years of research gave scientists a fairly good idea of the way in which the aquifer system functioned, especially since the establishment of the well field. This provided information of the response of the aquifer unit to large scale abstraction. The Langebaan Road aquifer unit is a multilayered system with a lower aquifer composed of Elandsfontyn gravel overlaying a bedrock layer of either granite of the Vredenburg or Darling plutons of the Cape Granite Suite or Malmesbury shale. The bedrock was considered impermeable. The upper aquifer layer was composed of mostly the Varswater Formation with peat and clay of the Elandsfontyn Formation forming the confining layer between the two aquifer layers. The extent of the different layers of the aquifer unit was plotted with a fair amount of accuracy and the clay layer was considered to be continuous between the two aquifer layers. Monitoring data for the area was done since 1974 with a gap in data-set between 1991 and 2001. Despite all the data from geophysical work, boreholes drilled, and the monitoring record, the research done prior and during the artificial recharge pilot project in 2008 and 2009 the aquifer units did not respond quite as anticipated. The Artificial Recharge (AR) pilot project team concluded that the aquifer units responded in a particular manner as opposed to the expected response according to the data and conceptual model at hand. It was thus clear that there are gaps in the conceptual model of the aquifer systems in the bigger Lower Berg River Valley that include the Langebaan Road, Elandsfontein and other aquifers that needed to bridge before another pilot test is attempted. Although the artificial recharge pilot project did not yield the expected results, valuable lessons were learned. This article will look at the conclusions and recommendations of the research done on the pilot project and attempt to evaluate the monitoring data (water levels, chemistry and rainfall) from the period just before the beginning of the AR pilot project. The monitoring data would be manipulated using the following techniques
Waste Management in Nigeria: A paradigm Shift	Akobundu	Amadi	Nigeria	2015	waste management, environmental pollution, Modern sanitary landfill
Abstract The manner in which municipal and industrial wastes generated are disposed in the urban areas in Nigeria is worrisome. The practice of dumping solid wastes in abandoned burrow-pits or valley and the discharge of liquid wastes directly on soils or surface water without any form of treatment has resulted in soil and water pollution. The continuous release of dangerous gases into the atmosphere by industries unabated has contributed to air pollution. These inadequate waste disposal techniques have created serious environmental and health challenges. Due to increasing population growth rate, urbanization, industrialization and economic growth, there has been a phenomenal increase in the volume of wastes generated daily and handling of these wastes have constituted an environmental problem. The need to manage these wastes in an environmentally-friendly manner that will guarantee safety of the soil and water resources lead to the present study. The newly designed waste management landfill incorporates advanced features such as complex multiple liner construction to facilitate organic decomposition and maintain structural integrity. The multiple protective layers and regular monitoring ensure that the waste management landfills exist in harmony with their surrounding environments and communities. These features that enhances maximum protection of soil and water from contamination by plume by decaying waste is lacking in the un-lined open waste dumps been practiced in the country. Pollution abatement, waste reduction, energy saving, health and economic benefits are some of the advantages of the newly designed sanitary landfill system.
Successful field pilot scale nitrate removal using low technology methods	Sumaya	Israel		2015
Abstract Decades of monitoring, characterising, and assessing nitrate concentration distribution and behaviour in the soil profile and it's pathway into groundwater have resulted in a good understanding of its distribution in the country. While the national distribution is of great importance, site specific conditions determine fate, transport, and ultimately concentration in a specific area. Field experimental work included installation of a barrier containing a cheaply available carbon source to treat groundwater. The "reactor"/ tank with dimensions- 1,37m height, 2.15m diameter used for the experiment was slotted for its entire circumference by marking and grinding through the 5mm thick plastic material. The top section was left open to allow for filling and occasional checking of filled material during the experiment. The tank was packed with Eucalyptus globulus woodchips which was freely available at the site. Concentrations of groundwater nitrate at the site were well over what could be expected in any naturally occurring groundwater systems, and would result only by major anthropogenic activities in unconfined aquifer areas of South Africa. The changes in parameter concentrations with time were measured in order to determine the efficiency and life span of the carbon source used for the experiment. This paper considers 35 months of monitoring at a site where a low technology method was implemented. Field implementation was tested at a site which previously experienced some NH4NO3 spills. Main results from the field work showed that nitrate was totally removed at the treatment zone and surrounding boreholes, and even sulphate and NH4+ were removed during the experiment. This shows that the woodchips were successful in affecting denitrification for 35 months. Data also shows that boreholes further downstream from the tank had reduced NO3-, SO42- and NH4+ levels. Using the available biodegradable carbon for the woodchips based on its composition, a barrier lifespan could be determined. The results of calculations showed that the barrier would be effective for at least another 6.9 years from the period of the last sampling date. A total lifespan of about 10 years can thus be estimated.
Identification and Assessment of LNAPL Hydrogeological Conditions to Refine Conceptual Site Models.	Adolf	October		2015
Abstract LNAPL present in a monitoring well forms part of the broader groundwater system and is effectively influenced by hydrogeological conditions, which are always changing. Monitoring of LNAPL is therefore of utmost importance to identify and assess the LNAPL hydrogeological conditions. Both groundwater and LNAPL can exist as unconfined and confined. Groundwater is unconfined when the upper boundary is the water table and is confined as a result of the presence of a confining layer with a relatively low vertical hydraulic conductivity that inhibits the flow of all liquids. LNAPL becomes unconfined when the apparent free product thickness increases with a decreasing groundwater elevation and confined when apparent free product thickness increases with an increasing groundwater elevation. The LNAPL is confined as a result of the difference between the capillary properties of the mobile LNAPL zone and its confining layer. Specifically, LNAPL is confined when it cannot overcome the pore entry pressure of the confining unit. Consequently, LNAPL may be confined when groundwater is not. The paper attempts to describe the hydrogeological conditions in case histories of both primary and fractured aquifers and illustrate how to identify and assess the conditions. Data such as free phase and groundwater level monitoring, well logs, sieving of soil and LNAPL bail tests are used as assessment tools. The additional required data is gathered and integrated in the conceptual site model, followed by a revision of the CSM and a refinement of decision goals over time. Thus the CSM matures and enables an improved understanding of the site characteristics and the re-adjustment of decision criteria. {List only- not presented}
An Acid Base Accounting study of the coal-bearing formations in the Waterberg coalfield	Lore-Mari	Deysel	Karoo	2015	coal mine, sulphur, acid base accounting
Abstract Coal constitutes 77% of the primary energy needs in the country, with the Waterberg Coalfield estimated to host about 40% of the remaining South African coal resources. The Karoo coals were deposited in a reduced environment that have the potential to produce sulphides within the sediments they are hosted. The sulphur content within the coal can range from 0.1 wt.% to as high as 10 wt.%. Mining generates a disturbance in the natural groundwater levels and affects the surrounding water chemistry when sulphate is produced as a result of pyrite oxidation. Acid base accounting (ABA) was used to determine the balance between the acid producing potential (AP) and acid neutralizing potential (NP). From the analysis the Net Neutralising Potential (NNP) classified samples as either acid or non-acid producing. ARD does not only result in the generation of acid but is accompanied by decreased pH and increased values of specific conductance, dissolved metals and sulphate. The ABA results showed that interburden and coal samples have higher risks of producing acid upon oxidation than overburden samples. Higher concentrations of neutralising minerals are present in overburden samples. ABA indicated that the material 60m below ground surface had a higher acid producing potential than the material above. The analysis from kinetic tests showed the long-term behaviour of different samples, with the electrical conductivity (EC) and pH changing over time. Samples with lower pH continued to produce more sulphate, while calcium continued to increase until it was depleted from the samples. Inductively coupled plasma analysis determined the release of the heavy metals which can be detrimental to the environment, such as As, Co, Ni and Pb. The water demand will increase as mining continues in the area, with inter-catchment transfers identified to overcome local water scarcity issues. ARD poses a big threat to both groundwater and surface water resources.
Complementary use of electromagnetic frequency domain and electroseimic survey methods in groundwater exploration in Zimbabwe.	Joseph M	Zulu	Zimbabwe	2015
Abstract Complementary use of electromagnetic frequency domain and electrosiesmic geophysical exploration methods in groundwater exploration in Zimbabwe. Joseph M Zulu, Josrum Enterprises No. 129 A Fort Street, Albion Flats, 2nd Floor, Office Suite 5 Room 3, Bulawayo, Zimbabwe. Email Address: [email protected]. Abstract Geophysical survey methods and divining are commonly used in groundwater exploration. In view of the current costs of drilling boreholes and fear of drilling a dry borehole, most people prefer the use of geophysical survey methods to have their boreholes sited. Some prefer the use of diving methods for initial siting and then confirmation of the identified site using geophysical survey methods. The key principle being complementarity of the methods to confirm the presence of water at the identified site. Electrical resistivity method and electromagnetic frequency domain methods are popular in ground water exploration in Zimbabwe, with electrical resistivity being the method of choice by many investigators. A new approach in groundwater exploration is proposed where complementarity of geophysical methods is exploited. A complementary approach of using geophysical methods in conjunction with geology, where two methods are used in investigating a site is proposed. In the study the latest technology in groundwater exploration, electrosiesmic survey method was used to complement the electromagnetic frequency domain method in various geological environments. Electromagnetic profiles were carried out on the target areas. Inversion was done on the collected and results presented as a pseudo section. Anomalies identified were further investigated using electrosiesmic sounding. The results of the sounding were presented in the form of a sounding curve. The subsurface layer thicknesses were calculated using forward modelling assuming the typical seismic velocity values of waves generated when passing through geological formations in the areas under investigation. The geology of areas studied include granite, greenstone, Kalahari sands, sandstones, mudstones and basalt of the Karoo stratigraphy. The approach produced impressive results. High yielding borehole sites were identified and successfully drilled in areas where it had been accepted that it was difficult to get water or in areas where it had been accepted there was no groundwater. Comparison of driller's log with models generated from geophysical survey results was also done. Key words: electromagnetic, electroseismic, geology, complementarity, groundwater. I acknowledge that this work has not been published elsewhere.
Integration of water simulation modelling for water conservation and demand management in the mining sector (a case study)	Fanie	Botha	South Africa	2015	legislative challenges, integrated modelling, WUL
Abstract This paper outlines and presents out-of-the-box theories as examples to highlight some of the challenging restraints within the current legislative environment preventing scientists, engineers and other operational personnel to take theory into action and implementation. Key to this is the very static nature of the water use license (WUL)and associated process. The first example shows how integrated dynamic water modelling can be utilized to create an integrated water and waste management plan within the mining sector. The models developed using principles from Government Notice 704, the Best Practice Guidelines (BPGs) and the principles of water conservation and demand management. Ultimately it keeps clean and dirty water flows separate and optimises the use of dirty water in order to reduce raw/potable water off-takes through this process. The objective of these models are to optimise the water use and develop strategies to ultimately enable mines to optimize it's internal non-potable water resources therefor relieving pressure on the limited potable systems, as well as aiding surrounding communities, in which they operate, with potable water. Results from the model provides for 1 or 20 years simulation data that differs year-on-year based on numerous factors, i.e. rainfall, run of mine (ROM) feed and growing/declining surface run-off areas. The variability of the results makes it almost impossible to utilize within application documentation as it is too complex and it does not align with the application figures as required in the WUL process. This resulting in a fairly simplistic and sometimes unrealistic static model that is submitted as part of the application.
A management plan towards the flooding of an opencast mine with adjacent underground sections.	Eelco	Lukas	Mpumalanga	2015
Abstract The colliery is situated in the Mpumalanga Coalfield, north of Trichardt in the Republic of South Africa. The opencast is already rehabilitated but still acts as an entrance to the underground sections of the mine. The Life of Mine indicates active mining until 2035. We were tasked to develop a mine closure plan. Two surface drainage systems are present, namely the Trichardt Spruit and the Steenkool Spruit. Both these systems have been diverted locally around the opencast with the necessary permission, to maximize coal extraction and protect the environment. Several passive treatment options were tabled to minimise the post closure environmental contamination. After careful consideration it was decided to develop a mine flooding plan to exclude oxygen from the mine thereby minimising the sulphate generation inside the opencast and underground sections. To start flooding as early as possible, sections of the underground mine were identified as natural or artificial compartments to store water. The rehabilitated opencast is flooded using recharge water from rainfall. The capacity of the rehabilitated open pit is enlarged to evaporate all the excess water in the pit making the need for a treatment plant unnecessary.