Conference Abstracts

All Abstracts were presented at the Groundwater Conferences

Displaying 551 - 600 of 795 results
Title Presenter Name Presenter Surname Area Conference year Sort descending Keywords

Abstract

The Rietvlei Wetland, located in the Western Cape of South Africa is well recognised for harbouring numerous bird species, and is ranked the 6th most important coastal wetland in the South-western Cape. Researchers perceive that the wetland could be threatened by the growing drought hazards, and increased water demand in Cape Town. The extent of the effects is however unquantified and unknown. This therefore calls for extensive research and novel approaches to understand and quantify wetland hydrodynamics, to shape wetland management frameworks. Conducting thorough field work to understand wetland processes, and the use of numerical models for future prediction of black swan events are well recommended. Thus, the study aims to develop a conceptual hydrogeological model for Rietvlei Wetland, and to develop a numerical model to quantify the wetland’s groundwater budget. To achieve this, historical data was gathered, and field work which included groundwater monitoring, collection of sediment profiles and water quality analysis was undertaken. Preliminary results show that the wetland is underlain by an unconsolidated aquifer, largely overlain by different types of sand, mixed with clay and silt, and precipitation is the main source of groundwater into the wetland. A distinct relationship is seen between elevation, soil type and soil structure, such that during the peak rainy season, groundwater tends to be above the ground surface in the low-lying salt pans, dominated by clayey layers on their surfaces. These surfaces tend to crack during the dry season, facilitating preferential flow pathways at onset of rain. This information, and other historical data will be used to develop a numerical model using MODFLOW-NWT and ModelMuse. The numerical model is perceived to be the basis of groundwater modeling using open-source software for Rietvlei Wetland, and may be used for predicting the impacts of drought and increased groundwater abstraction on the wetland’s hydrodynamics.

Abstract

Estimating pumping rates for the purpose of equipping boreholes with suitable pumps that will not over abstract either the boreholes or the aquifer(s) that are intersected is often assessed through test pumping of the boreholes prior to pump selection. While the South African National Standard has guidelines on the methodologies and durations of these tests (SANS 10299-4:2003), many production boreholes in the agricultural and industrial sectors are still equipped based upon so called Farmer Tests or Pump Inlet Tests (PIT), often of a short (6-24 hour) duration. These tests are also frequently and incorrectly confused with a Constant Head Test (CHT), both of which are different in methodology to SANS 10299-4:2003 testing, which relies to a high degree on data collected during a Constant Discharge/Rate Test (CDT or CRT) and recovery thereafter. The study will assess differences in test pumping methodology, data collection, analysis methodology and final recommendations made between Farmer Tests and SANS 10299-4:2003 methodology tests for 20 boreholes in which both tests were performed. The selected sites cover a variety of geological and hydrogeological settings in the Western Cape. Test comparisons include boreholes drilled into the Malmesbury Group, Table Mountain Group and Quaternary alluvial deposits, with tested yields ranging from 0.5 – 25 L/s.

Abstract

Delineation of groundwater resources of a given area is importance for management of groundwater resources. This is often done manually by combining various geo-scientific datasets in Geographic Information System (GIS) environment, which is time consuming and is prone to subjective bias and also suffers from other human induced uncertainties and difficult to cope with increasing volumes of data. The explosive growth of data leading to ‘rich data, but poor knowledge’ dilemma yet we have challenges to be solved. Artificial Intelligence (AI) has been successfully used in fields such as robotics, process automation in engineering, industry, medical and domestic households. Artificial Intelligence tool have the able to bridge this gap by augmenting the human capabilities in understand science far better than before. Incorporating AI into groundwater potential mapping greatly improves computation speed, reduces the subjectivity nature of manual mapping and lessens human induced uncertainties. The software platform includes artificial intelligence algorithms such as artificial neural networks, support vector machines, random forest, index-overlay and fuzzy logic.

The software platform is semi-automatic to allow the user to control some of the processes yet automating the other processes. The possible inputs to the AI for training includes; aquifer types, topographic slope, lineament and drainage density, land-use / land-cover (LULC), distance to lineaments, distance to streams and soil clay content. Yield values of selected boreholes are used as training outputs.

The software was tested using data gathered for the area surrounding Maluti-a-Phong in the Free State Province of South Africa. The area was chosen because of recent drought which has hit the country and local municipalities are searching for groundwater resources for building wellfields to supply local communities with fresh water. The groundwater potential map of the area was validated using borehole yield values of boreholes which were not used for modelling. Good correlation values as high as 0.85 was obtained between model values and borehole yield. The final groundwater potential map was divided into four zones; very good, good, poor and very poor. Based on this study, it is concluded that the high groundwater potential zones can be target areas for further hydrogeological studies.

The usage of the software proved to be efficient in minimising the time, labour and money needed to map large areas. The results of which can be used by local authorities and water policy makers as a preliminary reference to narrowed down zones to which local scale groundwater exploration can be done. AI should be viewed as augmented intelligence as it aid the decision-making process rather than replacing it. Data-driven approaches should also be knowledge-guided for efficient results.

Abstract

Ewart Smith, J; Snaddon, K; de Beer, J; Murray, K; Harillal, Z; Frenzel, P; Lasher-Scheepers, C

Various analysis techniques are available for assessing the groundwater dependence of ecosystems. Hydrogeological monitoring within the Kogelberg and greater Table Mountain Group (TMG) aquifer has provided various datasets from multiple scientific disciplines (hydrological, hydrogeological, geochemical, climatic, ecological and botanical). Using a variety of analysis techniques, and using the Kogelberg as a case study, this paper assesses the groundwater dependence of several ecological sites (wetlands and streams). The starting point is a sound geological and hydrogeological conceptualisation of the site. The approach involves conceptualisation and analysis within each scientific discipline, but also requires bridging between areas of specialisation and analysis of a variety of datasets. This paper presents the data and analyses undertaken and the relevant results as they pertain to several sites within the Kogelberg.

Abstract

The EKK-TBA is significant in anchoring Gross Domestic Product growth and development in both countries is heavily reliant on groundwater. Recently a transboundary diagnostic analysis (TDA) and a strategic action plan (SAP) for the EKK-TBA was completed. The analysis resulted in a three-fold expansion of the EKK-TBA boundary. The new EKK-TBA boundary overlaps part of the Okavango and Zambezi River Basins and now also includes major wellfields in Botswana and Zimbabwe (Nyamandlovu and Epping Forest) as well as the Makgadikgadi Pans which act as the surface water and groundwater discharge zone.

An analysis of institutional arrangements was carried out to enhance effective and efficient management of the EKK-TBA. Noting the complexity of the EKK-TBA. the initial institutional response could potentially be the development of a bilateral agreement between Botswana and Zimbabwe for cooperation and coordination to support the management of the TBA. This agreement would seek to establish a Joint Permanent Technical Committee (JPTC) that would also co-opt in members from the two shared watercourse commissions. Such a JPTC would enable improved coordination across the varying transboundary dimensions and would align with the precepts of the Revised Protocol on Shared Watercourses. This would include such principles including sustainable utilization, equitable and reasonable utilisation and participation, prevention, and co-operation, as well as aspects of data and information exchange and prior notification.

Abstract

Saldanha Bay Local Municipality appointed Skytem to conduct an airborne geophysical 3D aquifer mapping survey. As part of improving the sustainable management of the groundwater resources and exploring the options of Managed Aquifer Recharge, a better understanding of the aquifers is required. The Skytem technology unlocked a rich understanding of the subsurface geology and the groundwater contained in it.

Before the main survey commenced, a trial survey was conducted to investigate the quality of the data that may be expected from the main survey. The trial survey was conducted over the existing water supply wellfield where there were existing groundwater data including borehole lithology from drilling and ground geophysics. Consequently, the main survey commenced and consisted of the following:
1) Magnetic survey providing information regarding bedrock composition and where it changes due to faults or deposition,
2) Time Domain Electromagnetic survey providing conductivity/resistivity of the subsurface,
3) Detailed elevation along flight paths, and
4) 50Hz signal to understand where interferences can be due to power lines.

The survey interpretation showed the following important aquifer characteristics that will be useful for future management of the aquifer system:
1) Bedrock elevation and paleo topography, 2) Areas with different bedrock composition, 3) Geological faults in the bedrock, 4) Bedrock below the surface, 5) Areas with thick dry sand, 6) Clay layer extent and area without clay, 7) Areas with different water quality, and 8) Areas with very high concentrations of salt.

The survey output and interpretations are regarded as very useful for the update of the conceptual models for the area. Data can now be used to update the numerical models and improve the management of the wellfields.

Abstract

More often these days we hear concerns from water users regarding “how much water is the newly drilled borehole of a neighbor extracting from “their” river water”. These are serious question with serious repercussions for sustainable use and economic development. No one wants to lose what they have invested in. On the other hand, from a groundwater perspective, this is very one sided.

Numerical modelling solutions are often proposed to clients as a more accurate method of determining the groundwater surface water interaction, with the addition of volumes removed from the modelling domain, to present to decision makers the changes in volumes of discharge into streams or volumes of infiltration of stream water into the aquifer. However, this is an expensive and time-consuming exercise, and will most likely incur additional costs to accumulate sufficient meaningful data sets for input into these detailed models. A robust combination of analytical and numerical solutions is proposed, while keeping aquifer assumptions conservative, where a lack of regional data exist. This is useful in quantifying this interaction and associated volumes better without the full time and cost associated with calibrated regional flow and transport models. Analytical calculations assist in the quantification of the aquifer’s hydraulic and physical properties and is used to conceptualize flow better and determine the inputs for a conservative well field scale numerical model, in which the change in flow between groundwater and surface water system are also evaluated. The well field scale model is calibrated in a fraction of the time as a conventional flow model (less than 20%), while volumes derived is defendable and based on measurable data. This combination is viewed to be a critical step in providing time effective solutions

Abstract

Approximately 982 km3 /annum of the world’s groundwater reserve is abstracted, providing almost half of all drinking water worldwide. Globally, 70% is used for agricultural purposes while 38% for irrigation.

Most water resources of South Africa are threatened by contamination caused by industrial, agricultural, and commercial activities, and many parts of the country face ongoing drought with an urgent need to find alternative freshwater sources, such as groundwater. Groundwater constitutes approximately 15% of the total volume consumed, hence it is an important resource that supplements insufficient surface water supplies across South Africa.

Very little attention has been afforded to understanding the anthropogenically altered vadose zone as a potential source or buffer to groundwater contamination. This is evident from few research studies that has applied multiple isotopic tracers to characterise this zone. Most subsurface systems in South Africa are characterised by fractures, whereby flow and transport are concentrated along preferential flow paths.

This study aims to evaluate the performance of different tracer classes (environmental and artificial) with one another, and create a better understanding of the hydraulic properties, mean residence time and transport mechanisms of these tracers. The influence of unsaturated zone thickness on recharge mechanisms will also be evaluated.

Site visits will be conducted for the proposed study areas, and the neighbouring sources of contamination will be assessed. The matric potential and unsaturated hydraulic conductivities will be measured using various techniques. Water samples will be collected and analysed for the various tracers from the vadose zone using gravity lysimeters including suction cups. Several tracers will also be injected into boreholes where samples will be collected to calculate tracer residence times (BTC’s) and further constrain the hydraulic properties of the vadose zone. All samples will be analysed, interpreted, and simulated using the numerical finite-element modelling code SPRING, developed by delta h. The software derives quantitative results for groundwater flow and transport problems in the saturated and unsaturated zones of an aquifer.

The research is expected to provide more insight into the selection and use of environmental and artificial tracers as markers for detecting, understanding the transport processes and pathways of contaminants in typical altered South African subsurface environments. The impact derived improved characterisation of the pathways, transport, and migration processes of contaminants, leading to groundwater protection strategies and appropriate conceptual and numerical models. The output from this study will determine the vertical and horizontal flux for both saturated and unsaturated conditions.

Abstract

Because the quality of groundwater is influenced by the host rock through which it moves, it differs on a site-specific basis, and is often naturally brackish or even potentially harmful to people. In spite of this, many practitioners incorrectly use the SANS 241 Drinking Water Standard as “compliance requirement” to compare groundwater quality against. This standard only applies to water that has been purified to be suitable for potable purposes at a water treatment works in terms of regulations made under the Water Services Act 108 of 1997. The only circumstance in which it could be used to compare the quality of natural groundwaters against, is where such groundwater is (to be) used, for potable purposes (with or without treatment), and then only to provide guidance on the level of treatment required to facilitate suitability for such domestic use, and not to determine possible ‘unacceptable’ levels of contamination. Therefore, the comparison of groundwater quality results against the SANS 241 Drinking Water Standard is not only a scientifically flawed practice, it has no basis in law. It is furthermore a scientifically flawed practice to refer to groundwater quality as ‘good’, ‘bad’, or ‘poor’, as it reflects a judgemental anthropocentric perspective that has no place in modern discussions on judicious environmental management and monitoring.

 This then raises the question, what are, or should the limit values be against which groundwater quality results should be compared to determine if it has been negatively affected by anthropogenic activity to such an extent that a scientifically substantiated claim can be made that the groundwater has been ‘polluted’, an allegation with criminal liability implications?

This paper aims to answer this question in the context of South African Framework law and policy, and propose a methodology to determine appropriate site-specific limit values for groundwater quality.

Abstract

A map is a symbolic or diagrammatic representation of an area of land or sea, showing physical features and the relationship between these elements. It often reduces a three-dimensional world to two dimensions. Maps are generally static – fixed to paper or some other medium. Maps are produced for different reasons, leading to different types of maps, e.g., roadmaps, topo-cadastral maps and the groundwater maps – with the latter the topic of this article. There is a lot of work going into maps. This includes collecting all the data, doing evaluation and analysis of the data and selecting the data to use on the map. It is not possible to present all the information on a map and maps are often a generalisation. Different kinds of groundwater maps include availability, quality, vulnerability and protection. The selection of symbols to represent the information and the rendering of the maps are important in producing understandable, useful maps, but need explanations.

The success in representing the information on a map will determine the usefulness of a map, but it is still often misused. At the end of this long and tedious process where conflict management skills were well developed, you may find that the information on the map is outdated before the ink on the map is dried properly. The production of maps should be an iterative process, where new data can be incorporated as soon as it becomes available. It is an expensive process and cannot be repeated too often. This article will look at the processes that helped to shape the current series of hydrogeology maps of South Africa, and how to use it optimally while mindful of limitations. It will also briefly touch on recent research that aims to help with the production of improved groundwater maps for South Africa.

Abstract

The frequency, intensity, and duration of droughts are increasing globally, putting severe pressure on water supply systems worldwide. The Western Cape Province suffered from a period of severe water shortages that began around January 2015 and lasted until about July 2018. During this recent drought, there was a forced reduction in water use, predominantly from the agricultural sector. Citizens also reduced water use and increasingly tapped into groundwater for their needs irrespective of whether the hydrogeology was considered favourable or not. Unmonitored and unregulated abstraction of groundwater, especially under unstable climatic conditions, poses a significant risk to the future water security of the Western Cape.
We hypothesize that groundwater enabled the municipalities, residents, and industries of the Western Cape to survive the recent drought. Our aim is to evaluate the change in groundwater storage during the 2015 to 2018 drought and its subsequent recovery. To achieve this, we must gain a comprehensive understanding of the dynamics of separate components of the water cycle, as well as the overall water balance.

While there is data on surface water use during the drought, the impact on groundwater resources has yet to be evaluated. However, the accurate assessment of groundwater use is difficult, especially in data-scarce regions, such as South Africa. In our study, we combine remote sensing from NASA’s Gravity Recovery and Climate Experiment (GRACE), the Global Land Data Assimilation Systems, groundwater level measurements from the National Groundwater Archive, and ancillary datasets from the City of Cape Town’s weekly water dashboard to assess the total change in groundwater storage in the Cape Town Metropolitan area and surrounding cities over an 8-year period, from 2012 to 2020. Preliminary results from GRACE data analysis show a steady decline in aquifer saturated thickness over the drought, indicative of an increase in groundwater use.

Abstract

Globally, cumulative plastic production since 1950 is estimated to have reached 2500 Mt of plastic. It is estimated up 60% of this plastic is either resting in landfills or the natural environment, including groundwater settings. Microplastics are small pieces of plastic ranging between 1μm – 5mm in size and have been found in every ecosystem and environment on the planet. Much of the available literature on microplastics is focused on marine environments with few in comparison focused on freshwater environments, and even fewer on groundwater settings.

The aim of this study is therefore to investigate the attenuation process responsible for influencing microplastic transport in saturated sands. This research will adapt colloid transport theory and experiments to better understand the movement of microplastics through sandy media. Saturated aquifer conditions will be set up and simulated using modified Darcy column experiments adapted from Freeze & Cherry (1979). Modified microplastics will be injected into the columns as tracers and the effluent concentrations measured by Fourier-transform infrared spectroscopy (FTIR). Breakthrough curves will then be plotted using the effluent concentrations to determine the attachment efficiency (α). It is expected the attachment efficiency will vary by microplastic type and size range. The Ionic strength of the solution flowing through the column and the surface charges of both microplastics and sandy surfaces are likely to influence the degree of attenuation observed. The relationship between different types of microplastics and collector surfaces from a charge perspective and their influence on the degree of attenuation will be evaluated.

Given the lack of literature, its ubiquitous presence and postulated effects on human health, this research is significant. Through this research, the transport and attenuation of microplastics through sandy aquifers can be better understood, and in the process inform future research and water resource management.

Abstract

Israel, S

Thousands of pharmaceuticals, pesticides and microplastics are consumed and disposed of directly or indirectly into various waterbodies globally. They are collectively termed “contaminants of emerging concern” or CECs. Contaminants of emerging concerns are defined as micropollutants that are present in the environment that are not regulated and that can pose a risk to the health of both humans and wildlife. The spread of these CEC’s in water systems is not isolated to a specific place and is on the rise all over the world. This study aims to investigate the spatial and temporal distribution pattern of pharmaceuticals in Cape Town’s water network, in order to assess the occurrence, concentration levels and distribution of pharmaceuticals in various water bodies. The study focuses on the occurrence of eight pharmaceuticals which are most frequently used and occurs in various water bodies around the world, namely acetaminophen, diclofenac, carbamazepine, naproxen, rifampicin, tenofovir, progesterone, sulfamethoxazole. The research sites include six waste water treatment plants in Cape Town with receiving rivers and borehole sites nearby and downstream from the waste water treatment works. Liquid chromatography combined with mass spectrometry is the selected method used to analyse the analytes of interest in the collected samples. Preliminary results obtained during the summer period (January 2021) showed that pharmaceuticals had indeed spread from waste water treatment plants into receiving water bodies with concentrations ranging from 0.8 to ≤ 6400 ng/L in both surface and groundwater due to the inefficient removal of these compounds. Continued research will conclusively address the concentration levels as a function of time, and consider the spatial distribution and its seasonality. It can be concluded from the preliminary results, that pathways of contamination from waste water discharge points to surface water and groundwater do indeed exist for the 8 pharmaceuticals considered.

Abstract

In response to the drought which started in 2017, the Western Cape Government set about securing water supplies to key facilities across the province, including the Knysna Hospital. Drilling and testing of two boreholes at the facility indicated it to be viable to establish a groundwater supply of 66 KL/d from the underlying Table Mountain Group Aquifer. Iron concentrations were low and the initial water chemistry analyses pointed to concentrations below the SANS 241 aesthetic limit. However, further to the implementation and operationalization of the groundwater supply schemes, significantly elevated iron concentrations of up to 6 mg/L were observed. This contributed to the difficulty in getting the Knysna Hospital’s alternative water supply operational. Best practice requires that as little oxygen as possible gets introduced into the groundwater system; and this can be achieved by pumping the borehole continuously at the lowest rate possible. It is not always possible to do this under operational conditions when the water demand varies. To counter the iron problem in the potable water and to prevent or retard an increase in the iron concentration in the abstracted groundwater, iron treatment was added to the treatment train and a dual pumping regime was adopted. Using the variable speed drives that had been installed with the pumps, two pumping rates were adopted – with the rate controlled by the level in the treated water storage tank. When the tank level is low, the borehole is pumped at a rate of 0.9 L/s. However, when the level fills to 70%, the pumping rate is reduced to 0.35 L/s and continues pumping even if the tank is full. The modified system was brought into operation in August 2019 and has continued to meet the water demand of the hospital.

Abstract

The South African government is actively pursuing unconventional oil and gas (UOG) extraction to augment energy supplies in South Africa, but it risks damaging water quality. The Department of Water Resources and Sanitation recently released regulations to protect water resources during UOG extraction for public comment.

Regulations are one of the main tools that can be used to minimise UOG extraction impacts on water resources and enhance an environmentally sustainable economy. This tool must however be used correctly. Many states in the US and Canada have extensive regulations to protect water resources during UOG extraction but they are often ineffective, either because they were poorly drafted or because they are not properly enforced. Since South Africa is a water-scarce, groundwater-dependent country, we asked South African groundwater experts what regulations are needed and how to enforce them. Focusing on the interface between science and public policy, we critically analyse and recommend the most appropriate fracking regulations to protect groundwater resources. Additionally, we consider the enforcement mechanisms required to ensure the proper regulation of fracking.

The results from this study can assist the government in ensuring that regulations that they are currently drafting and finalising, are appropriate to protect groundwater resources, and that they would be able to enforce them effectively.

Abstract

We present findings from a current project in the Hout Catchment, Limpopo Province in South Africa, In grounding the discussion, we propose a citizen science framework that builds on ideas of the living lab, trust and research integrity. The idea of research integrity is not only about ethics but also about methods and we propose participatory methods that are inclusive, just and fair. We achieve trust and practices of research integrity, applying participatory action research methods which not only address the hydrological void in data by identifying water features in the catchment but also have intrinsic value, enhancing well being and brokering trust. The frame presents the idea of water literacy – where the material aspects of CS (dip-meters, rain gauges etc.) intersect with the more intangible goods that have to do with human well-being. In our application we redress the bias where the focus lies more on the natural science aspect rather than the humanities with its attention to human well-being and the recognition of difference and diversity. Considering CS within the frame of feminist philosophy, it is personally transformative with the element of ‘surprise’ that the end point is undetermined – and it focusses on diversity and difference across segments and within segments in the catchment. Participatory parity has intrinsic value (equity and a more just social context) but also extrinsic value (better data and plotting of map features for remote rural areas otherwise difficult to access). CS is a powerful emancipatory tool that is able to generate virtuous cycles of inclusion and equality. We propose a CS frame that captures the ideas of trust, the living lab, SDGs and the emancipatory notion of citizen science, narrowing the divide between the natural and social sciences and acknowledging research integrity and the opportunity for what we call ‘authentic’ learning.

Also Refer Article published in the BWJVol131 https://bwa.co.za/the-borehole-water-journal/2021/12/28/south-african-groundwater-project-shows-the-power-of-citizen-science

Abstract

Iron biofouling in boreholes drilled into the Table Mountain Group has been documented, with groundwater abstracted for the Klein Karoo Rural Water Supply Scheme and irrigation in the Koo Valley hampered by clogged boreholes, pumps and pipes. A similar phenomenon has been experienced at some boreholes drilled and operationalised by the Western Cape Government in response to the onset of the crippling drought in 2017. Monitoring of groundwater levels and pumping rates has yielded data showing a gradual decrease in groundwater level as the pumping rate reduced in response to the pump becoming biofouled, with possibly the same negative impact on the borehole itself. Methods are available to rehabilitate the boreholes (mechanical scrubbing, chemical treatment and jetting), but it seems difficult to destroy the bacteria and re-occurrence of biofouling appears inevitable. In the absence of better solutions, current experience suggests an annual borehole maintenance and rehabilitation budget of R 100 000 per borehole is required. This paper presents three case studies of boreholes drilled into the Malmesbury Group and Table Mountain Group and explores possible triggers of biofouling and its manifestation in the monitoring data.

Abstract

As populations, agricultural and industrial demands grow with time, increasing attention is placed on developing groundwater resources in a sustainable manner. At the small, local scale, this tends to involve exploration (scientific and otherwise) and test pumping (also subject to more and less scientific methods). While there can be some subjectivity in the analysis of scientific test pumping data (the selection of representative periods of drawdown stability, the inclusion of potential boundary conditions and the estimation of available drawdown), published methodologies such as the FC method (2001) and the Q20 (1959) and R20 (2006) concepts attempt to calculate sustainable abstraction rates based on these tests. At a larger catchment or aquifer scale, water balance estimates of inflows, storage and outflows are also used to estimate the effects of groundwater abstraction within such a “water budget”. This can be done conceptually, but is often also through a numerical model. A drawback of such methods is the difficulty in estimating representative annual inflow volumes, such as groundwater recharge. One such methodology is the Aquifer Firm Yield Model (2012) which assesses sustainable groundwater supplies based on threshold recharge inflows, baseflow and evapotranspiration outflows, and a 5 m aquifer saturated fluctuation limit. While this was intended for use at a preliminary stage of investigations, before sufficient hydrogeological data would be available for a numerical model, it nonetheless provides an estimate of the available groundwater for abstraction based on a water budget concept rather than test pumping data analysis. A comparison of the results of these two approaches is provided for several newly developed municipal production boreholes in the Karoo to compare where the assumptions inherent to each approach may be highlighted by noticeable differences in results.

Abstract

Maphumulo B; Mahed G

Disastrous droughts sweeping across South Africa has led to the population turning towards groundwater as their primary source of water. This groundwater movement has increased the need for proper groundwater management in terms of both quality and quantity. Groundwater sampling is a crucial, and yet often overlooked, component of water quality assessment and management. This thesis evaluated the various groundwater sampling methods used within fractured rock aquifers in the Beaufort West region. Each sampling method was evaluated in terms of their precision and accuracy according to their hydrochemical results. Historical hydrochemical data from past reports was utilised to determine how various groundwater sampling techniques influence results. This helped gained a better understanding of the requirements required to correctly and accurately sample different water sources such as boreholes and windmills. These requirements include the importance of purging in order to remove stagnant water from windmills. By understanding these sampling techniques, it is possible to create a groundwater sampling protocol which should be followed when sampling fractured rock aquifer in order to ensure best possible results.

Abstract

Stringent drinking water standards for constituents like chromium, arsenic, and nitrates, combined with continually higher demand for groundwater resources have led to the need for more efficient and accurate well characterization. Many boreholes are screened across multiple aquifers to maximize groundwater production, and since these aquifers can have different water qualities, the water produced at the wellhead is a blend of the various water qualities. Furthermore, the water entering a well may not be distributed equally across the screened intervals, but instead be highly variable based on the transmissivity of the aquifers, the depth of the pump intake, the pumping rate, and whether any perforations are sealed off due to physical, chemical, or biological plugging. By identifying zones of high and low flows and differing water qualities, well profiling is a proven technology that helps optimize operational groundwater production from water supply boreholes or remediation systems. This frequently results in increased efficiencies and reduced treatment costs. By accurately defining groundwater quantity and quality, dynamic profiling provides the data needed to optimize well designs. Conventional exploration methods frequently rely on selecting well screen intervals based on performing and analyzing drill stem tests for one zone at a time. Using dynamic flow and water quality profiling, the transmissivity and water quality can be determined for multiple production zones in a matter of one to two days. It also allows the location and size of the test intervals to be adjusted in the field, based on real-time measurements.

In this paper we discuss dynamic well profiling techniques with project case examples of characterization different types groundwater boreholes for a variety of applications and industries resulting in significant cost saving and sustainable water abstraction.

Abstract

The year 2020 will forever be synonymous with the Covid-19 pandemic and the immeasurable impact it has had on all our lives. During this time, there was one avenue that reigned supreme: technology. Whether it was Zoom calls or Netflix, online consultations or video conferencing at work, technology took charge. In light of this, GCS (Pty) Ltd started exploring ways that technology could assist with the most common problem identified in the Water and Environmental sectors, which is the management of large volumes of geodata. Thus, the invention of eSymon.

Monitoring of the environment usually generates a significant amount of data. If this data is not systematically stored, problems often arise with:

• Limited access to historical data due to poor storage;

• Different formats of stored data (if they are kept in digital form at all);

• Continuity and integrity of the data; and

• Security of the data.

Therefore, years of historical data cannot be used or trusted. The solution was to develop eSymon, which is an acronym for Electronic Data Management System for Monitoring. eSymon is primarily designed to:

• Systematically import, store, view and manipulate large volumes of monitoring data;

• Provide remote and instantaneous access to site-specific information;

• Allow data visualization using an interactive GIS interface; and

• Create various outputs such as time series graphs, geochemical diagrams and contour maps.

The main idea of the software is to have all historical data for a site on one platform and have it be accessible and functional at the touch of a button. This results in several key benefits, including saving time, providing accurate and up to date information, not having to wait for technical reports to assess trends and compliance, providing several means of data visualization and, most importantly, ensuring data security.

Abstract

Managed aquifer recharge (MAR), the purposeful recharge of water to aquifers for subsequent recovery, is used globally to replenish over-exploited groundwater resources and to prevent saltwater intrusion. Due to increased water shortage worldwide, there is a growing interest in using unconventional water resources for MAR such as reclaimed water or surface water impaired by wastewater discharges. This, however, raises major concerns related to pollution of our drinking water resources. MARSA is a new Danish-South African research project aiming at developing MAR technologies allowing a broader span of water resources to be used for MAR, including storm water, river water, saline water, and even treated wastewater. It is hypothesised that improved removal of organic pollutants, nitrogen species, antibiotic resistance, and pathogens can be achieved by establishment of reactive barriers or creation of different redox environments through injection of oxidizing agents to anaerobic aquifers during recharge. In MARSA we will carry out feasibility studies, as flow-through columns, first in Denmark and later in South Africa, to investigate the capacity of South African aquifer sediments to remove organic pollutants, nitrogen species, antibiotic resistance genes, and pathogens. Then, based on these studies, MAR options will be further investigated at field conditions in South Africa using real source water from MAR sites. For this presentation we will give an overview of the MARSA-project and show results from previous feasibility studies investigating the potential of reactive barriers to remove organic micropollutants and ammonium. These studies have shown that establishment of reactive barriers will cause oxygen depletion, but also more efficient ammonium and organic micro-pollutant removal. MARSA is funded by the DANIDA fellowship centre, Ministry of Foreign Affairs of Denmark. Project no. 20-M03GEUS.

Abstract

This study is based on the presence and concentration of antiretroviral drugs in water bodies around the Western Cape Province in South Africa, these areas include wastewater treatment plants, water treatment plants, stormwater, and landfill boreholes. South Africa has the highest rate of HIV and AIDS in the entire world, statistics from 2018 show that 7.7 million South Africans are infected with HIV/AIDS and 68% of them are on antiretroviral treatment (UNAIDS). South Africa has the largest antiretroviral treatment program (ART) in the world, due to the lack of proper water and sanitation these drugs are deposited in the environment poorly and reach water bodies, therefore, contaminating them. This study involves the collection of samples from areas such as Mitchell’s Plain, Khayelitsha, Athlone, Cape Flats, and Atlantis around the western cape, these samples are analyzed to determine the presence of 5 antiretroviral drugs used in South Africa which are Efavirens, Lopinavir, Nevirapine, Ritonavir, and Tenofovir. Water samples are prepared for analysis by filtering 2.5ml water through a 1µm glass fiber filter, the sample is then placed into sample vials and analyzed on HPLC-QTOF/MS. Mass Hunter software is used to identify the specific ARVs in the water samples analyzed, by searching for the compounds via their chemical formulas. With a match made if their chemical formula, retention time and mass to charge ratio of the compounds correspond. Concentrations range between 0.0855ng/ml Nevapine to 4.3289ng/ml Lopinavir, this analysis has determined that all the mentioned antiretroviral drugs are indeed present in different water bodies around the identified areas within the Western Cape in varying concentrations.

Abstract

Unconventional gas development in South Africa consists of but not limited to shale gas extraction commonly known as “fracking”, Underground Coal Gasification (UCG), Coalbed Methane (CBM), to extract natural gas from geological formations is a new, rapidly expanding industry in the world and in South Africa. However, there are general concerns that these operations could have large negative impacts such as groundwater contamination. This article maps out the development of regulations for unconventional gas operations, according to Section 26(1) (9) of the National Water Act, 1998 (NWA) and read together with Government Notice 999 (Government Gazette No.: 39299, of 16 October 2015). The objectives of the published DWS regulations include, augmenting the NWA and its existing regulatory framework, providing for a step-wise process for authorising all unconventional gas operations to allow for informed decision making, to set prohibitions and restrictions for protection of water resources, and requirements for disclosure on chemicals to be used during the operations. The objectives of DWS regulations are aligned to the NEMA, and MPRDA requirements for exploration and production of these operations, and are further supplemented by the minimum information requirements for water use licensing application and as part of integrated water resource management. In conclusion, DWS proposes thoroughly consulted and fit-for-purpose regulatory framework that seeks to propose water use law and requirements for unconventional gas operations based on the National Water Act (1998). With these proposed regulations DWS ensures that it plays its critical role in the development of a regulatory framework for unconventional gas operations.

Abstract

The main purpose of this paper is to present a case study where soil moisture and rainfall data were evaluated for engineered tree plantations, to understand the potential impact on vertical groundwater recharge. Soil moisture for probes within the tree plantation root zones and reference sites within the same soil types were evaluated, in context to site rainfall patterns. Water transfer from shallow to deeper soil zones for a dataset of 2 years are presented. Observations in terms of water movement in the root zone are made. A water balance is presented in the effort to conceptualise the impact on water transfer through the upper vadose zone and to quantify the significance in terms of potential vertical groundwater recharge reduction.

Abstract

Saldanha Bay is partially dependent on groundwater as part of their bulk water supply, as surface water resources in the area are extremely limited and fully allocated. Due to this, there is lots of pressure on the groundwater resources by industrial development and residential growth. Despite studies being conducted on these aquifer systems since 1976, they are still poorly understood especially with regards to their recharge and discharge processes. This study aimed at providing better insight and understanding on the natural groundwater recharge and discharge processes in order to assist in the better management of groundwater resources in Saldanha Bay. Recharge investigations included a Time Domain Electromagnetic airborne geophysical survey, the assessment of groundwater levels, infiltration tests, hydrochemical analyses as well as stable and radioactive isotope analyses. These methods allowed for the delineation of the geological layers and extent, determination different water quality spatially across the aquifer, determination of flow paths through the saturated and unsaturated zones, identification of inter-aquifer flow as well as different recharge processes in the area. The results of this study showed that is highly likely that the Saldanha Bay Aquifers are mainly recharged via deep flow paths from the Aurora Mountain Range and Moorreesburg region. Investigations also showed that it is unlikely that the Aquifer Systems are recharged by local rainfall due to thick unsaturated sands and low annual rainfall, except for runoff at the foot of granite hills through focused recharge processes. The Berg River, Langebaan Lagoon and the Atlantic Ocean were identified as being the main discharge zones for the area. It is recommended that further hydrogeological investigations are conducted in the Moorreesburg region in order to get a fuller picture of the regional groundwater recharge processes and flow to Saldanha Bay.

Abstract

Previous studies have shown that river-aquifer connectivity exists. However, an integrated approach that consists of multiple measuring methods to quantify and characterise such connectivity still needs improved scientific understanding due to the underlying principles and assumptions of such methods, mainly when such methods are applied in a semi-arid environment. Three techniques (hydrogeochemistry, stable water isotopes, and baseflow separations) were applied to quantify and characterize river-aquifer interactions. The study’s objective was to improve knowledge and understanding of the implications of the results from the three methods. Field measurement, laboratory assessment, and record review were used to collect primary and secondary data. Results showed that Na- HCO3 water type dominated the upper stream, discharging onto the surface and forming stream sources. Na-HCO3 water type was an outlier when the area’s geology and land use activities were assessed. The isotope results showed that the studied aquifer had 9% recently recharged water. Being the upstream, the freshwater in such a mountainous aquifer was expected. The baseflow index (BFI) results showed that the dependency of the total river flow to aquifer discharge contributed 7.24 % in the upper stream, 7.31% in the middle stream, and 7.32% in the lower stream. These findings provided empirical evidence that hydrochemistry, stable isotopes, and baseflow separation methods provide key insights into aquifer-stream connectivity. Such findings inform choosing appropriate and relevant measures for protecting, monitoring, and allocating water resources in the catchments.

Abstract

Case studies illustrate a conceptual framework for shallow groundwater flow systems’ temporal and spatial variability with groundwater-surface water interactions in the Boreal Plains of Canada. The framework was developed using a twenty-year hydrometric dataset (e.g., climatological and streamflow data, hydraulic heads, vertical hydraulic head gradients, geochemical and isotopic signatures). The region is characterized by low-relief glacial landscapes, with a mosaic of forestlands and peatlands, and a subhumid climate, resulting in spatially heterogeneous storage and transmission properties, variable recharge and evapotranspiration potentials, and highly complex patterns of water movement. Two primary spatiotemporal scales were examined to create a holistic, variable-scale conceptual model of groundwater movement: the large scale (e.g., glacial landforms, regional topography, decadal climate cycles) and the small scale (e.g., individual landcover, local hummocks, annual moisture deficits). Water table behaviour, evapotranspiration rates, and runoff were controlled by a hierarchy of interactions between hydrological processes occurring at different spatiotemporal scales; however, the specific order of controls depends on the hydrogeological setting. The case studies, supported by empirical and numerical modelling, demonstrate that smaller-scale heterogeneities in geology and recharge can dominate over topographic controls, particularly in areas with high conductivity or hummocky terrain, where the climate, geology, and topographic relief are similar. Many hydrogeological studies rely on surface topography as a first‐order control; however, with field observations and modelling, this conceptual framework demonstrates the need to consider the potential dominance of subsurface characteristics and processes, plus climate, especially in landscapes with low recharge and low relief.

Abstract

The Guarani Aquifer System (SAG) is the main public water supply source in Bauru City (Brazil). It mostly consists of sandstones and is a confined unit of fossil waters (~600 thousand years); therefore, it is a non-renewable and finite resource. SAG is overlaid by the Bauru Aquifer System (SAB), predominantly consisting of sandstones, siltstones, and mudstones, and is essential for private water supply in the municipality. In recent decades, constant drops in water levels in SAG and increases in contaminant loads in SAB have been observed in production wells, generating the need to understand the geometry of those aquifer systems.

This work presents the preliminary results of the analysis and review of hydrogeological and geophysical data from 59 deep wells and 3D geological modelling using Leapfrog Works® to represent a conceptual model of the study area. SAG has a thickness of up to 356 m in the wells and is represented, from bottom to top, by Teresina, Piramboia, and Botucatu formations. In the north and northeast regions, SAG is covered by a layer of basalts from the Serra Geral Aquifer System (SASG) with a thickness of up to 190 m. The thickness of SASG is variable (or even null) due to the action of important faults with vertical displacements that created structural windows in the region. SAB covers the Araçatuba (basal portion), Adamantina (144 m), and Marília (65 m) formations. The lower contact of SAB is made with SASG or SAG (central region). Project funded by FAPESP (2020/15434-0).

Abstract

Sand mining in southern Africa is on the rise, fuelled largely by rapid urbanisation. This creates a range of societal and biophysical challenges and supports livelihoods in regions with high unemployment. Relevant scientific studies are scarce. This study explores the impacts of sand mining from ephemeral rivers on Botswana, South Africa and Mozambique communities through field visits, interviews, modelling, remote sensing and legislative analysis. What was expected to be a hydrogeology project focussing on water resources identified a broader range of issues that should be considered. Initial results uncovered a range of negative biophysical impacts, including alteration of hydrological regimes, which in turn affect groundwater recharge and exacerbate drought and flood risks, destruction of riparian vegetation, increased erosion, damage to infrastructure (including bridges and roads), reduced water quality, and the spread of invasive plant species. Equally important are the range of social impacts, such as drowning people and livestock, loss of agricultural land, increased traffic, dust, noise and crime. Complex governance arrangements influence these social and environmental challenges. The findings highlight the need to adopt an inter- and trans-disciplinary approach that considers linkages between human and natural systems. This approach is essential for finding sustainable solutions for the provision of construction materials that limit detrimental impacts on water resources, ecosystems and livelihoods. 

Abstract

Groundwater is the most important source of potable water in rural areas of Acholiland, a sub-region of northern Uganda. Installation of handpumps has been the focus of local government and international aid to provide safe drinking water in Uganda. However, non-functional handpumps are one reason for the abandonment of groundwater resources. For handpumps to be sustainable for years, appropriate siting and construction is required, as well as monitoring. This is common knowledge to specialists working in rural supply, but gaps in knowledge transfer and field skills may exist for the persons installing and maintaining handpump wells. This is a case study of a ten-day field campaign designed to train local participants who actively work in the rural groundwater supply sector. Nine non-functional handpump sites were identified for repair and hydrogeology and geophysical studies. A non-governmental organization, IsraAID, along with Gulu University implemented training by hydrogeology specialists to build local capacity. The training included handpump functionality tests, downhole inspections, electrical resistivity tomography surveys, and water quality sampling, including a novel Escherichia coli test that did not require an incubator. Functionality tests and downhole inspections provided simple but effective ways to assess handpump and well issues. Training in water quality empowered the participants to complete rapid assessments of the quality of the water and start monitoring programs. The success of the project was based on collaboration with multiple organizations focusing on the development of local capacity. The lessons learnt from this campaign should be considered for other rural groundwater supply scenarios.

Abstract

The interaction between groundwater and wetlands is poorly understood, even though it has been the topic of many research projects, like the study done at the Langebaan Lagoon. This interaction is complex as it lies at the intersection between groundwater and surface water, but each situation is unique, with different conditions regulating the interaction. Wetlands can be the source of water that recharges groundwater systems on the one hand, while the other is dependent on the groundwater systems. This interaction became part of the project looking at how to implement Managed Aquifer Recharge for Saldanha Bay Local Municipality without having a negative impact on the groundwater-dependent ecosystems, such as the springs and wetlands in the area. Ten wetlands were identified on the Langebaan Road Aquifer Unit, and a monitoring programme was developed. The purpose of the monitoring was to determine the status of the wetlands as a baseline before the implementation of managed aquifer recharge and to determine the level of groundwater dependence. The latter was done by hydrochemical analysis of rainwater, groundwater and water from the wetlands and stable isotope analysis. The ability of the wetlands to act as a recharge point to the groundwater system will be investigated through column experiments and lithostratigraphic analysis of soil columns taken at the wetlands. Groundwater levels will also be plotted as contour lines to determine the intersection of the water table with the wetlands in the area.

Abstract

This paper presents the results of groundwater flow modelling studies that were conducted within the scope of the PRIMA RESERVOIR project. The project’s main goal is to develop an innovative methodology to mitigate land subsidence due to excessive groundwater exploitation in water-stressed Mediterranean watersheds. This objective is achieved by integrating earth-observation-derived land subsidence rates with a coupled implementation of numerical groundwater flow and geomechanical modelling. MODFLOWbased 3-D transient flow models were constructed for the four pilot sites (the coastland of Comacchio in Italy, the Alto Guadalentín aquifer in Spain, the Gediz River basin alluvial aquifer in Turkiye and the Azraq basin in Jordan) that have different hydrogeological properties and pose different challenges concerning water management. Models were calibrated and run for similar simulation periods (2013-2021) to obtain hydraulic head drawdowns and changes in groundwater storage. Land subsidence at these sites was evaluated using Advanced Differential Radar Interferometry (A-DInSAR) on image stacks from the Sentinel-1 satellite. Subsidence rates were then compared to hydraulic head drawdown rates to identify groundwater pumping-induced subsidence areas. The comparison for all study areas suggested that locations of maximum displacements do not necessarily coincide with areas that display the largest head drawdown calculated by the flow models. Other triggering factors, such as the thickness of compressible materials, are also related to high subsidence areas.

Abstract

Understanding the sensitivity of groundwater resources to surface pollution and changing climatic conditions is essential to ensure its quality and sustainable use. However, it can be difficult to predict the vulnerability of groundwater where no contamination has taken place or where data are limited. This is particularly true in the western Sahel of Africa, which has a rapidly growing population and increasing water demands. To investigate aquifer vulnerability in the Sahel, we have used over 1200 measurements of tritium (3H) in groundwater with random forest modelling to create an aquifer vulnerability map of the region.

In addition, more detailed vulnerability maps were made separately of the areas around Senegal (low vulnerability), Burkina Faso (high vulnerability) and Lake Chad (mixed vulnerability). Model results indicate that areas with greater aridity, precipitation seasonality, permeability, and a deeper water table are generally less vulnerable to surface pollution or near-term climate change. Although well depth could not be used to create an aquifer vulnerability map due to being point data, its inclusion improves model performance only slightly as the influence of water table depth appears to be captured by the other spatially continuous variables.

Abstract

Huixian Karst National Wetland Park is the most typical karst wetland in the middle and low latitudes of the world and has become an internationally important wetland. The relationship between water quality and aquatic organisms in Huixian Wetland is a hot research topic in wetland ecology. This article focuses on the relationship between the current water quality situation in Guilin Huixian Karst Wetland and the growth of wetland plants. Sixteen sampling points are set up in the wetland to monitor and analyze water quality in wet, normal, and dry seasons. The Kriging index interpolation method is used to obtain a comprehensive water quality interpolation map in the survey area during normal water periods and in combination with the wetland plant survey sample data and the landscape status. A comprehensive analysis of the relationship between wetland plant growth and water quality. The results show that the centre of Huixian Wetland receives recharge from surrounding groundwater, which is greatly affected by the surrounding water quality. The comprehensive water quality is relatively good in the dry season, relatively poor in the normal season, and the worst in the wet season. Agricultural production, non-point source pollution, rural domestic sewage, and human interference affect wetland water quality, which directly affects the structure and function of plant communities and the ecological service function of wetlands.

Abstract

The Bauru Aquifer System (BAS) is a significant source of water supply in the urban area of Bauru city. Over the last decades, BAS has been widely affected by human activities. This study evaluates the nitrate plume in groundwater from 1999 to 2021 and how it relates to urbanization. The methods used were analysis of the data of 602 wells, survey of the sewer network and urbanization, and reassessment of nitrate concentration data. The seasonal analysis of 267 groundwater samples allowed the identification of concentrations up to 15.1 mg/L N-NO3 - mainly from the area’s central region, where the medium to high-density urban occupation dates back to 1910. Otherwise, the sewage system was installed before 1976. The reactions controlling the nitrogen species are oxidation of dissolved organic carbon, dissolution of carbonates, mineralization, and nitrification. Wells, with a nitrate-increasing trend, occur mainly in the central and northern regions, settled from 1910 to 1980-1990, when no legislation required the installation of the sewage network before urbanization. In turn, wells with stable or decreasing nitrate concentrations occupy the southwestern areas. Over the years, the concentrations of these wells have shown erratic behaviour, possibly caused by the wastewater that leaks from the sewer network. The bivariate statistical analysis confirms a high positive correlation between nitrate, sanitation age, and urban occupation density, which could serve as a basis for the solution of sustainable groundwater use in the region. Project supported by FAPESP (2020/15434-0) and IPA/SEMIL (SIMA.088890/2022-02).

Abstract

Aquifer storage and recovery (ASR) can play a vital role in sustaining water availability to cope with increasing weather extremes. In urban areas, ASR systems may provide flooding risk mitigation and support urban greenery. However, such systems are often relatively small and therefore, their recovery performance depends more strongly on site-specific storage conditions such as dispersion and displacement by ambient groundwater flow. In this study, we evaluated the impact of these factors by adapting and developing analytical solutions and numerical modelling, with recently established Urban ASR systems as a reference for a wide range of realistic field conditions. We validated the accuracy and usefulness of the analytical solutions for performance anticipation. Results showed that a simple, analytically derived formula describing dispersion losses solely based on the dispersion coefficient (α) and the hydraulic radius of the injected volume (Rh) provided a very good match for all conditions tested where α/Rh<0.2. An expansion of the formula to include the development of recovery efficiency with subsequent cycles (i) was also derived and in keeping with simulation results. Also, displacement losses were found to be significant at groundwater flow velocities that are typically considered negligible, particularly as displacement and dispersion losses disproportionally enforced each other. For specific conditions where the displacement losses are dominant, using a downgradient abstraction well, effectively resulting in an ASTR system, might be beneficial to increase recovery efficiencies despite increased construction costs and design uncertainty.

Abstract

The results of a full field application of a DNA-based nano tracer in an arenitic aquifer are presented along with the comparison with the breakthrough of a classical tracer injected in parallel. DNA is encapsulated into amorphous silica spheres (nanoparticles), protecting the molecule from chemical and physical stresses. The main advantages of using DNA with classical tracers, like ionic or fluorescent, are the lower detection concentration and the chance to perform multi-tracer tests with many distinct signatures of injection. To the authors’ best knowledge, this is the first tracing adopting nano-particles on full field conditions in a sedimentary fractured aquifer. Preliminary tests in the lab were performed adopting either deionized water or groundwater collected at the experimental site: a set of nanoparticles at a known concentration was dissolved by adding a buffered fluoride solution, and DNA was then quantified by qPCR reaction (SYBR green). The hydrogeological setting is represented by a Miocenic marine arenitic aquifer (Pantano formation) outcropping extensively in Northern Apennines (Italy) and the main groundwater reservoir for public water supply through the uptake of many perennial springs. The main purpose of the tracing was to verify the transmissive capacity of fractures with high aperture (15-20 cm) identified by optical and acoustic televiewers inside an 80 m deep borehole. The injection was performed inside the borehole, and the tracer’s recovery was between 5-15 m, both in the uptake points of two perennial springs and in another borehole drilled nearby.

Abstract

Being extensively available and of high quality, groundwater is the primary source of freshwater in coastal regions globally. However, due to anthropogenic and natural drivers, groundwater salinisation is a growing threat to this resource’s long- and short-term viability. The causes and timescales of aquifer salinisation are complex and difficult to quantify, information essential for suitably timed mitigation strategies. One way to inform these strategies and develop storylines of future freshwater (un)availability is through 3D groundwater salinity modelling. These models can predict current groundwater distributions and quantitatively assess the impacts of a projected increase in groundwater extraction rates and sea-level rise. Until recently, detailed 3D models on this scale have been largely unattainable due to computational burdens and a shortage of in-situ data. Fortunately, recent developments in code parallelization, reproducible modelling techniques, and access to high-performance computing (e.g., via parallel SEAWAT) have made this feasible. Machine learning and data mining developments have also allowed an unprecedented opportunity to constrain and calibrate those models. With this in mind, we present our progress towards global 3D salinity modelling by showcasing a regional-scale model in the Mediterranean Sea area. This test case uses newly developed, automated geological and salinity interpolation methods to create initial conditions while implemented in a parallelized version of SEAWAT. The modelling outcomes highlight the potential of supra-regional scale modelling in the context of global (planetary) processes and localised anthropogenic effects.

Abstract

Electromagnetic (EM) techniques were used to map groundwater salinity and clay layers in the Netherlands. The EM method used the so-called time domain system, is towed behind an ATV and is therefore called towed TEM. The results revealed a detailed 3-dimensional insight into the subsurface’s sequence of clay and sandy layers. Also, shallow saline groundwater, far from the coast, has been detected related to a subsurface salt dome. The rapid, non-destructive data acquisition makes the tTEM a unique tool. Electromagnetic (EM) techniques detect electrical conductivity contrasts in the subsurface with depth. EM data can often be interpolated into a 3D model of electrical conductivity. Expert knowledge of the regional geohydrologist, together with existing (borehole) data, is paramount for the interpretation. The towed Transient Electro-Magnetic system (tTEM) is developed to acquire data up to 60-80m depth by driving a transmitter and a receiver behind an ATV. With a speed of 10-15 km/h, measurements are collected every 5m. On fields, the distance between lines is typically 20m, resulting in a dense network of data that is inverted into 1D resistivity models, showing the variation of conductivity with depth. Interpolating 1D resistivity models into a 3D model allows for further interpretation in terms of geology, lithology, and groundwater quality. The tTEM technique bridges the gap between point measurements and more expensive and lower-resolution airborne EM data collection. The technique is sensitive to disturbance by man-made conducting infrastructure.

Abstract

The development of satellite technologies creates more and more opportunities to build modern tools for monitoring the state of groundwater. The use of the GRACE satellites to monitor GWS changes has become widespread, but the degree of accuracy with which remote sensing data can estimate these changes is unclear. In this study, we quantified changes in the GWS in Poland from 2009 to 2022 using GRACE observations, in-situ data, and GLDAS. Long-term trends and seasonality were calculated and analysed for each time series. The correlation analysis between GRACE TWS, GWS obtained from GRACE and GLDAS, and GWS in situ was performed using linear regression. Pearson and Spearman’s methods show that GRACE performance is good in the region of shallow (up to 3 m) presence of thick (above 5 m) unconfined porous aquifers; however, performance is worse in a region with multiple aquifer systems, including fissured and karst aquifers. In addition, an unrepresentative groundwater GRACE signal is obtained in regions with surface water storage, such as the Baltic Sea area. It was also found that there is very high consistency between the GRACE observations and wells water level changes, while the GWS series obtained from GRACE and GLDAS do not provide adequate compatibility. According to the GRACE data, the results suggest that evapotranspiration and the hydrodynamic system have the greatest impact on the sensitivity of the GWS estimation. The results are important for better processing the GRACE data to obtain a representative signal for the GWS assessment.

Abstract

The Netherlands produces about 2/3 of drinking water from groundwater. Although there is seemingly abundant groundwater, the resource needs to be carefully managed and used wisely to safeguard the resource for future generations and in case of disasters whilst also preventing negative impacts from groundwater extraction on other sectors such as nature. Provincial governments are responsible for the protection of existing groundwater abstractions for water supply against pollution. To secure groundwater resources for the future, two additional policy levels have been introduced: Provincial governments have been made responsible for mapping and protecting Additional Strategic Reserves. These allow for additional groundwater abstractions to meet growing demands in coming decades (horizon 2040/2050). The National Government is responsible for mapping and protecting the National Groundwater Reserves (NGRs) as a third level of resource protection. NGRs serve multiple goals: to protect natural groundwater capital for future generations, to provide reserves for large-scale disasters affecting water supply and to provide reserves for possible use as structural water supply in the far future (horizon 2100 and beyond). NGRs are being delineated in 3D using detailed existing geological models and the Netherlands’ national (fresh-saline) hydrological model. The dynamics of the groundwater system are analysed through scenario analyses. Reserves for potential structural use are selected such that negative impacts on nature are prevented if future abstractions are to be realised. The policies being developed must balance interests of water supply against other sectoral interests such as the green-energy transition with increased use of geothermal energy and aquifer-thermal-energy-storage.

Abstract

An end-member mixing analysis has been conducted for the hydrogeological system of the endorheic catchment of the Fuente de Piedra lagoon (Malaga, Southern Spain). Three end-members have been considered because of the three main groundwater types related to the different kinds of aquifers found in the catchment. The model’s objective is to help understand the distribution of the organic contaminants (including contaminants of emerging concern [CECs]) detected in groundwater samples from the catchment. Results suggest that some contaminants can be related to long groundwater residence time fluxes, where contaminant attenuation can be limited due to low oxygen levels and microbial activity. The three main aquifer types are: (i) unconfined carbonate aquifers with low mineralized water corresponding to two mountain ranges with no human activities over theirs surface; (ii) an unconfined porous aquifer formed by Quaternary and Miocene deposits, exposed to pollution from anthropogenic activities (agriculture and urban sources); and (iii) a karstic-type aquifer formed by blocks of limestones and dolostones confined by a clayey, marly and evaporite matrix from Upper Triassic. The groundwater monitoring campaign for the analysis of organic contaminants was carried out in March 2018. Target organic contaminants included pharmaceuticals, personal care products, polyaromatic hydrocarbons, pesticides, flame retardants and plasticizers. For the mixing model, a dataset was built with the hydrochemistry and isotopic results (δ2 H, δ18O) from the monitoring campaign conducted in March 2018 and from campaigns carried out in previous years and retrieved from the literature.

Abstract

Recent advances in groundwater dating provide valuable information about groundwater recharge rates and groundwater velocities that inform groundwater sustainability and management. This talk presents a range of groundwater residence time indicators (85Kr, CFCS 14C, 81Kr, 36Cl and 4 He) combined with analytical and numerical models to unravel sustainability parameters. Our study site is the southwestern Great Artesian Basin of Australia where we study an unconfined confined aquifer system that dates groundwater from modern times up to 400 kyr BP. The study area is arid with a rainfall of <200 mm/yr and evaporation in the order of 3 m/yr. Despite these arid conditions we observe modern recharge rates in the order of 400 mm/yr. This occurs via rapid ephemeral recharge beneath isolated riverbeds where the sandstone aquifer directly outcrops. Groundwater dating and stable isotopes of the water molecule indicates that this recharge comes from monsoonal activity in the north of the continent that travel some 1500 kms. Furthermore, this is restricted to recharge in the Holocene.as we move down the hydraulic gradient groundwater “ages” increase and recharge rates dramatically decrease by orders of magnitude. We conclude that there has been a significant decline in monsoonal precipitation and hence recharge in the deserts of central Australia over this time. We present a couple environmental numerical model that describes how to estimate temporal recharge rates and estimates of hydraulic conductivity from groundwater age data that can be used for groundwater management.

Abstract

South Africa is the leading user of pesticides in Sub-Saharan Africa, but data on pesticide occurrence in (ground)water is limited. Consequently, there is a need to improve knowledge on transport pathways that cause pesticides to enter the aquatic environment. This research monitored pesticide concentrations in three agricultural catchments in the Western Cape, South Africa, including Grabouw (pome fruit), Hex River Valley (table grapes), and Piketberg (wheat). Passive samplers were deployed in rivers from March 2022- March 2023, adding to a 2017-2019 dataset of analytical and pesticide application data. Field and laboratory methods were developed at Stellenbosch University to measure pesticides using Liquid Chromatography-Mass Spectrometry. For quality control, duplicate samples were analyzed at Eawag, Switzerland. 30 compounds were detected, yet two/three comprise most of the total mass, including an analyte not considered in earlier investigations (dimethomorph).

Rainfall-flow relationships and agricultural application could only partially explain detection levels, suggesting that other factors, including non-agricultural application or groundwater input, might influence detections. Two compounds exceeded European Environmental Quality Standards (chlorpyrifos and imidacloprid). Imidacloprid is particularly concerning because it exceeded consistently despite few recorded applications. 2017-2022 imidacloprid data indicates a decreasing concentration trend in Hex River Valley and increasing trends in Piketberg and Grabouw. Consistently high detections during wet and dry periods suggest groundwater input. However, such pesticide transport pathways are poorly understood due to a lack of local evidence. Local authorities must establish a long-term monitoring program to understand better the risk pesticides pose to the aquatic environment and human health.

Abstract

Groundwater represents a crucial source of drinking water in the Lille metropolitan area. Despite its importance, the resource is vulnerable to the potential evolution of land use: recharge, runoff and evapotranspiration processes in a soil-sealing context and changes in cultural practices. As a result, stakeholders emphasized the importance of exploring the influence of land use on groundwater to ensure sustainable resource management and enhance territorial planning. The 3D hydrodynamic model helped manage groundwater resources, but the (MARTHE code) has a significant limitation in that it does not consider the impact of land use evolution. We propose to investigate the contribution of a hydrological distributed numerical approach incorporating land cover data in groundwater modelling compared to a global approach at the scale of a peri-urban territory. To do so, we use the HELP code by considering the temporal and spatial evolution of land use and their associated characteristics, such as vegetation and soil properties, to detail recharge and runoff over more than 20 years that we incorporate into the initial groundwater model.

The two approaches yielded comparable global water balance results. However, at the local scale, the model accounting for land use showed significantly different hydric components. Choosing the appropriate model depends on the specific research question and spatial scale, and considering land use evolution is crucial for accurate urban planning impact assessments, especially at the district level.

Abstract

Since 2018, the North China Plain has started a large-scale ecological water replenishment project for rivers and lakes, with 17.5 billion cubic meters total from the South–North Water Transfer Project and other water sources. It is a key question of how much water infiltration into aquifers will affect groundwater and how to characterize and evaluate this effect quantitatively. The groundwater numerical model of the Beijing-Tianjin- Hebei region as the main part of the North China Plain was established using a numerical simulation method, and the groundwater level variation under the replenishment condition was simulated and predicted. By comparing the two scenarios, the relative rise method of groundwater level was proposed to characterize the influence of river water infiltration on groundwater level, and the unstructured grid method was used to refine cells near the river to improve simulation accuracy. Simulation results show that the groundwater level around some rivers has risen significantly in the past four years, especially in the alluvial fan regions with better infiltration properties. Accordingly, at the Piedmont alluvial fan region, there is also a large influence range on groundwater level. The maximum influence distance is more than 10km (0.1m relative rise of groundwater level was taken as the influential boundary). According to the prediction, if the water replenishment project continues, the range of influence can continue to expand, but the expansion rate will slow down due to the reduction of the hydraulic gradient.

Abstract

Rising shallow groundwater temperatures are observed in many cities worldwide and are expected to increase further over the next century due to anthropogenic activities and climate change. The impact of groundwater temperature increase on groundwater quality is poorly understood. This study conducted two high-spatial-resolution campaigns in Vienna (Austria, autumn 2021/ spring 2022). At 150 wells, a comprehensive parameter set (e.g. major ions, nutrients, and water stable isotopes) was analyzed in groundwater collected, and at 812 wells, the water temperature was measured. Results are compared to available long-term data on groundwater chemistry (1991-2020). In theory, temperature triggers a cascade of effects, where, finally, the depletion of dissolved oxygen (DO) causes a switch to anaerobic microbial processes and a deterioration of water quality. No direct relation between DO and water temperature was observed between 10 and 20 °C. However, many wells delivered anoxic groundwater, including the one with the highest measured temperature (27 °C). The highest temperatures were consistently observed near potential heat sources (local scale), with a rapid decrease in temperature with increasing distance from these sources. Long-term data from particular high-temperature wells revealed decreased dissolved oxygen after sudden temperature changes of > 5 K. On a regional scale, it is observed that groundwater-surface water interactions and aquifer properties play a pivotal role in oxygen availability and redox conditions. In conclusion, high-spatial-resolution sampling combined with long-term data analysis is needed to determine the impact of temperature on water quality.

Abstract

The interaction between dryland hydrological fluxes and the high spatial and seasonal climate variability is inherently complex. Groundwater recharge is episodic, and rivers are ephemeral. When flow occurs in the river network, water is lost through the riverbed, giving rise to focused recharge, which could be a significant part of total recharge. We have used the integrated and physically based MIKE SHE modelling system to analyze the hydrological processes and fluxes in the 7,715 km2 Hout-Sand catchment in the South African part of the Limpopo River Basin. The discharge hydrograph measured at the outlet station is highly episodic, with a small baseline flow component superimposed by high flow events in response to intense rainfall. Likewise, the groundwater hydrographs from the area are characterized by rapid increases in groundwater levels in response to high rainfall events with recurrence intervals of several years. Due to the scarcity of basic measurements and information, we used data products from satellite platforms to supplement the information on rainfall, evapotranspiration, soil moisture, land use and irrigated areas. We applied MIKE SHE to test different conceptual flow models of the catchment by calibrating the different models against direct measurements of river discharge and groundwater levels and indirect estimates of evapotranspiration and soil moisture from satellite products. By analyzing the simulated model dynamics and the resulting values for the calibration parameters, we identified the most plausible conceptual model, which then forms the basis for water resources assessment and management recommendations for the Hout-Sand catchment.

Abstract

Along estuaries and coasts, tidal wetlands are increasingly restored on formerly embanked agricultural land to regain the ecosystem services provided by tidal marshes. One of these ecosystem services is the contribution to estuarine water quality improvement, mediated by tidally induced shallow groundwater dynamics from and to tidal creeks. However, in restored tidal marshes, these groundwater dynamics are often limited by compacted subsoil resulting from the former agricultural land use in these areas. Where the soil is compacted, we found a significant reduction of micro- and macroporosity and hydraulic conductivity. To quantify the effect of soil compaction on groundwater dynamics, we set up a numerical model for variably saturated groundwater flow and transport in a marsh and creek cross-section, which was parametrized with lab and field measurements. Simulated results were in good agreement with in situ measured groundwater levels. Where a compacted subsoil is present (at 60 cm depth), 6 times less groundwater and solutes seep out of the marsh soil each tide, compared to a reference situation without a compact layer. Increasing the creek density (e.g., through creek excavation) and increasing the soil porosity (e.g., by organic soil amendments) resulted in a significant increase in soil aeration depth and groundwater and solute transport. As such, these design measures are advised to optimize the contribution to water quality in future tidal marsh restoration projects.