Conference Abstracts

All Abstracts were presented at the Groundwater Conferences

Displaying 201 - 250 of 795 results
Title Presenter Name Presenter Surname Area Conference year Keywords

Abstract

Sacred wells are found across the world yet are rarely studied by hydrogeologists. This paper will present the results of a 5-year hydrogeological study of holy wells in Ireland, a country with a relatively large number of these wells (perhaps as many as 3,000). It was shown that holy wells occur in all the main lithology and aquifer types but are more numerous in areas with extreme or high groundwater vulnerability. Water samples were collected from 167 wells and tested for up to 60 chemical parameters, including a large range of trace elements. Statistical analyses were performed to see if there were any statistically significant associations between the chemical constituents and the reputed health cures for the different well waters, and the results will be presented here. One of the issues in communicating the research findings to the general public is in explaining the small concentrations involved and the likely very small doses pilgrims at holy wells receive during their performances of faith. The spiritual dimension, including the therapeutic value of the landscape where the well is located, is likely an important aspect of the healing reputation.

Abstract

Studies have examined the effects of groundwater pumping on nearby streams. Groundwater pumping affects streamflow, surface water rights, and aquatic ecosystems. This study investigates the impact of groundwater abstraction on surface water bodies. A secondary objective aims to develop a conceptual model to evaluate alternative approaches for streamflow depletion. The study area is a previous UFS/WRC test site along Modder River, Free State, South Africa. Streamflow depletion was simulated using four (4) analytical solutions, i.e., Jenkins (1968), Hantush (1964), Hunt (1999) and Hunt (2003). STRMDEPL08 analytical computer program tool is used to evaluate streamflow depletion. The aquifer parameters: distance of the boreholes to the stream; pumping periods analyzed in steady states conditions for a simulation period of 1 year; transmissivity with an average of 71 m/d; storativity of 0.02; specific yield of the aquitard range between 0.1 to 0.3; and abstraction rate of 2 l/s are defined for the hypothetical model. The average distances tested range from 10 m to 6,000 m. Pumping rate scenarios for an order of magnitude lower (0.2 l/s), 1 l/s; 4 l/s, and an order of magnitude larger (20 l/s) were simulated. Simulated graphs indicate that streamflow depletion rates are largest if the borehole is closer to the stream and decrease as the distance of the pumped borehole from the stream increases. Cumulative volume graphs for both analytical solutions decrease streamflow depletion volume

Abstract

Conjunctive use of surface water and groundwater plays a pivotal role in sustainably managing water resources. An increase in population, especially in the cities, increases the demand for water supply. Additional infrastructure to meet the needs and treatment techniques to remove the pollutants should be updated from time to time. Closing the urban water cycle by recycling and reusing treated sewage in the water sector can significantly reduce excessive groundwater extraction. However, this method is being implemented in only a few cities in developed countries. In the closed urban water cycle, treated sewage is discharged to rivers or other surface water bodies and used for managed aquifer recharge (MAR). Bank filtration, soil aquifer treatment and infiltration ponds are available MAR methods that augment the groundwater resources and remove pollutants during the natural infiltration process. These cost-effective natural treatment methods serve as a pre-treatment technique before public water supply to remove turbidity, algal toxins, bulk dissolved organic carbon and pathogenic microorganisms. The successful performance of these treatment methods depends on the need and feasibility for MAR, suitable hydrogeological conditions, sub-surface storage capacity of the aquifers, availability of suitable areas for MAR, type of MAR, source of recharge water, quality criteria, assessing the past, present and future climatic conditions. Case studies on groundwater resources management and water quality assessment, including for organic micropollutants from a large urban catchment in India, are presented.

Abstract

Kinsevere Mine is an open pit copper mine located within the Central African Copper Belt, experiencing common water challenges as mining occurs below the natural water table. The site’s conceptual model is developed and updated as one of the tools to manage and overcome the water challenges at and around the mining operations. The natural groundwater level mimics topography but is also affected by the operations. The pits act as sinks. The water table is raised below the waste dumps due to recharge in these areas, and the general groundwater flow direction is to the east. The site is drained by the Kifumashi River, located to the north of the site. Water levels from dewatering boreholes and natural surface water bodies define the site’s piezometric surface. The geological model is adopted to define the aquifers and groundwater controls. The Cherty Dolomites, a highly fractured Laminated Magnesite Unit, contribute the highest inflows into the mine workings. The Central Pit Shear Zone acts as a conduit and compartment for groundwater between Mashi and Central Pits. Hydraulic tests have been conducted over the years, and these data are used to estimate possible aquifer property values. The high-yielding aquifer on the west is dewatered using vertical wells, and the low-yielding breccia on the east is depressurized using horizontal drain holes. The site’s water management strategy is reviewed and improved through refinement of the conceptual model.

Abstract

The use of radiogenic isotope tracers, produced through bomb testing (e.g. 3H and 14C), and the application of these isotopes is yet to be fully explored now that atmospheric abundances have returned to background levels. New isotope-enabled institutions and laboratories have recently been established in developing countries to apply isotopes in practical research. This study utilized several laboratories in South Africa and in Europe to compile a robust hydrochemical (major cations and anions) and isotope (d18O, d2H, 3H, 14C, 86Sr/87Sr) dataset of groundwater from 95 sample locations in the Maputo province of Mozambique. Groundwater is hosted in different aquifers and recharged through variable mechanisms ranging from direct infiltration of exposed alluvial soils to inter-aquifer transfer between fractured aquifer systems in the mountainous regions and the weathered bedrock in the lowlands. A combination of hydrochemistry and isotopes provided insight into the heterogeneous nature of recharge, mixing of modern and fossil groundwaters, and aquifer vulnerabilities when combined with other physical parameters in the region. However, it is also clear that grab sampling over a regional spatial extent and two sampling seasons (wet and dry) did not capture all the system variability, and more regular monitoring would uncover details in the system’s behaviour not captured in this study.

Abstract

 Predicting and quantifying the hydrogeological interference of big underground works is a complex effort. This is due to the considerable uncertainty in estimating the key geomechanical and hydrogeological parameters affecting the area of potential interference of the projects. Moreover, the pattern of involved groundwater flow systems is hardly identified, either in natural or disturbed conditions. Base tunnels through mountain ridges are particularly complex in their interactions with groundwater. Several approaches and tools have been published to predict the magnitude and distribution of water inflows inside tunnels and their impact on many receptors (springs, rivers, lakes, wells, groundwater-dependent ecosystems). The research, co-funded by Italferr Spa (Italian railway national company for tunnel design), deals with calibrating and validating these methods based on huge datasets. Main engineering companies provided data from completed base tunnel projects. In particular, in this study, the Drawdown Hazard Index (DHI) method has been calibrated with a dataset of a 15 km long sector of the Gotthard base tunnel drilled through a crystalline geological setting. The calibration involved only the Potential Inflow (PI) parameter to verify the matching between the probability of inflow and the actual output of the excavation, according to the available data in the preliminary stage of the project. An alternative tool based on a machine-learning approach was then applied to the same dataset, and a comparison was presented.

Abstract

Groundwater is a hidden resource, so as part of making it more visible, geophysical methods can be very useful in inferring the delineation of aquifers and/or more productive zones to target in fractured rock environments. The most commonly used techniques to assist groundwater studies or exploration are still resistivity profiles or sections known as ERT or electrical resistivity tomography and vertical electrical soundings or VES. One of the limiting factors with this technique is the scale of what surveys can be conducted, resulting in, at best, some kilometers per day. The Hydrogeophysics group of Aarhus University have developed the towed transient electromagnetic (tTEM) system as a cost-efficient tool for characterizing regional hydrological systems to depths of up to 70 m as an alternative to these more traditional methods - which is highly productive in that collection of 40- to-80-line kilometers of data per day is feasible. The system is based on the transient electromagnetic (TEM) method, which involves using a transmitter and receiver coil to measure the electrical resistivity of the subsurface. The hydrological value in electrical resistivity images stems from the ability to delineate different hydrogeological units based on their contrasting electrical properties. Consequently, 3D electrical resistivity images can infer the subsurface hydrogeology and enhance the success of installing productive boreholes. This work presents case studies from several African countries (e.g., South Africa, Zimbabwe, Ethiopia, Senegal, and Togo). It demonstrates how the tTEM method can identify reliable drinking water sources in these countries.

Abstract

Nearly 1.9 billion people live in marginal environments, including drylands, semiarid, arid, and hyperarid environments. Obscure but ubiquitous circular pockmark depressions dot these lands. These circular depressions can range from a few meters to kilometers, and the depth of these depressions varies from a few centimeters to over 10 m. However, the genesis of the circles has been investigated among scientists for many years because of their obscure nature. Some researchers believe that termites cause fairy circles, while others believe they are caused by plants competing for water and nutrients. This study documented the Africa-wide prevalence and extent of the pockmarks for the first time, and it further classified the pockmarks according to their genesis and hydrological roles. We further investigated their relevance in serving as nature-based solutions to overcome water scarcity in dryland regions. So far, field evidence in Ethiopia and Somalia showed that these features potentially have water security significance in a) organizing surface water flows over arid/semi-arid landscapes, b) serving as the site of temporary surface water storage, and c) serving as the site of focused groundwater recharge into the underlying aquifers. This presentation will highlight the spatial prevalence, extent, and genesis model of the pockmarks across the drylands in Africa (South Africa, Namibia, Somalia, Ethiopia, Kenya, Chad, Senegal, Mali, Niger, etc.).

Abstract

Previous studies have shown that river-aquifer connectivity exists. However, an integrated approach that consists of multiple measuring methods to quantify and characterise such connectivity still needs improved scientific understanding due to the underlying principles and assumptions of such methods, mainly when such methods are applied in a semi-arid environment. Three techniques (hydrogeochemistry, stable water isotopes, and baseflow separations) were applied to quantify and characterize river-aquifer interactions. The study’s objective was to improve knowledge and understanding of the implications of the results from the three methods. Field measurement, laboratory assessment, and record review were used to collect primary and secondary data. Results showed that Na- HCO3 water type dominated the upper stream, discharging onto the surface and forming stream sources. Na-HCO3 water type was an outlier when the area’s geology and land use activities were assessed. The isotope results showed that the studied aquifer had 9% recently recharged water. Being the upstream, the freshwater in such a mountainous aquifer was expected. The baseflow index (BFI) results showed that the dependency of the total river flow to aquifer discharge contributed 7.24 % in the upper stream, 7.31% in the middle stream, and 7.32% in the lower stream. These findings provided empirical evidence that hydrochemistry, stable isotopes, and baseflow separation methods provide key insights into aquifer-stream connectivity. Such findings inform choosing appropriate and relevant measures for protecting, monitoring, and allocating water resources in the catchments.

Abstract

Recharge is an important factor in Water Resources Management as it is often used as a measure for sustainable groundwater abstraction and resource allocation. The recharge estimation is, however, linked to a specific time, area and conditions and then generalised over seasons and years. Current climate change estimations predict a warmer and drier future for western parts of southern Africa. Groundwater recharge estimation methods do not consider changes in climate over the short term and do not consider the longer trends of a changing climate. This article looks at the various methodologies used in recharge estimations and their application in a changing world, where rainfall period, pattern and intensity have changed, where higher temperatures lead to higher actual evapotranspiration and where there is a greater need for water resources for use in agriculture, industry and domestic use. Our study considers the implications of current recharge estimation methods over the long term for water allocation and water resources management of groundwater resources from local and aquifer catchment scale estimations.

Abstract

This study presents a novel approach for developing geologically and hydrogeologically consistent groundwater models at large valley scales. Integrating geological, geophysical, and hydrogeological data into a single model is often challenging, but our methodology overcomes this challenge by combining the Ensemble Smoother with Multiple Data Assimilation algorithm (ESMDA) with a hierarchical geological modelling approach (ArchPy). The ESMDA framework assimilates geophysical and hydrogeological field data jointly. To diminish the computational cost, the forward geophysical and groundwater responses are computed in lower-dimensional spaces relevant to each physical problem, alleviating the computational burden and accelerating the inversion process. Combining multiple data sources and regional conceptual geological knowledge in a stochastic framework makes the resulting model accurate and incorporates robust uncertainty estimation. We demonstrate the applicability of our approach using actual data from the upper Aare Valley in Switzerland. Our results show that integrating different data types, each sensitive to different spatial dimensions enhances the global quality of the model within a reasonable computing time. This automatic generation of groundwater models with a robust uncertainty estimation has potential applications in a wide variety of hydrogeological issues. Our methodology provides a framework for efficiently integrating multiple data sources in geologically consistent models, facilitating the development of hydrogeological models that can inform sustainable water resource management.

Abstract

The National Park Plitvice Lakes (NPPL) in the Republic of Croatia was declared in 1949 due to its exceptional natural beauty. However, in addition to its attraction, the NPPL also encompasses an area of significant karstic water resources in the Dinaric karst region, on the border between the Black Sea and the Adriatic Sea catchment. In some parts, groundwater connections to the Klokot Spring and Una River in Bosnia and Herzegovina have been assumed by hydrogeological research and proven by tracing tests, which confirm transboundary aquifer. Assessing transboundary aquifer systems already presents challenges in managing this area, considering not only the well-defined physical catchment. Therefore, comprehensive protection is necessary, which must reconcile people’s aspirations for spatial development with the sustainability of natural systems. Protecting karstic water resources can be achieved through separate analyses of the natural vulnerability of surface and groundwater and their integration into a comprehensive protection system. Protection should be layered through three levels: (1) protecting the area from the impact of the upstream catchment, (2) protecting surface water in the catchment that is most affected by anthropogenic influences, and (3) protecting the surrounding area from the impact of the NPPL, which with numerous visitors every year and tourist facilities, also represents significant pressure on downstream catchments. The ultimate goal is a scientifically based proposal for sustainable development of the protected area, in line with the needs of protection and spatial use, and based on an assessment of the overall risk to water resources.

Abstract

Test-pumping drawdown curves do not always sufficiently indicate aquifer characteristics and geometry and should never be analysed in isolation. Using derivative analysis and flow dimension theory, inferring the regional geometries and flow characteristics of fractured aquifers that are otherwise unknown or inconclusive is possible. As the drawdown and/or pressure front propagates through the aquifer, it reaches various hydrogeological objects that influence flow regimes and imprints a sequence of signatures in the drawdown derivative curve. The conjunctive interpretation of these flow regime sequences and hydrogeological data results in a robust, well-informed conceptual model (in terms of both local groundwater flow and the aquifer), which is vital for sustainable groundwater resource management. Derivative and flow regime analysis was applied to the test-pumping data of confined and unconfined Nardouw Aquifer (Table Mountain Group) boreholes within Steenbras Wellfield (Western Cape). Major NE-SW trending folding and transtensional Steenbras-Brandvlei Megafault Zone, in association with cross-cutting faults/fractures and younger False Bay Suite dykes, make the Nardouw Aquifer (and deeper Peninsula Aquifer) hydrogeologically complex. The sequential flow regime analyses reveal domains of conceptual flow models, including open vertical fractures, T-shaped channels, double (triple) porosity models, and leaky/recharge boundary models, amongst others. Appropriate analytical flow models (type curve fitting) are then applied for accurate aquifer parameter estimations, which are used to evaluate recommended long-term yields through predictive pumping scenarios. The outcome is an improved hydrogeological understanding and enhanced conceptual model of the aquifer, which informs numerical modelling, ecological protection, and groundwater resource management.

Abstract

There is an urgent need to support the sustainable development of groundwater resources, which are under increasing pressure from competing uses of subsurface geo-resources, compounded by land use and climate change impacts. Management of groundwater resources is crucial for enabling the green transition and attaining the Sustainable Development Goals. The United Nations Framework Classification for Resources (UNFC) is a project-based classification system for defining the environmental-socio-economic viability and technical feasibility of projects to develop resources and recently extended for groundwater. UNFC provides a consistent framework to describe the level of confidence in groundwater resources by the project and is designed to meet the needs of applications pertaining to (i) Policy formulation based on geo-resource studies, (ii) Geo-resource management functions, (iii) Business processes; and (iv) Financial capital allocation. To extend use in groundwater resources management, supplemental specifications have been developed for the UNFC that provide technical guidance to the community of groundwater professionals to enhance sustainable resource management based on improved decision-making. This includes addressing barriers to sustainably exploiting groundwater resources, avoiding lack of access to water and also related to ‘common pool resources’ in which multiple allocations are competing with domestic water supply (e.g. geo-energy, minerals, agriculture and ecosystems, and transboundary allocation of natural resources). UNFC for groundwater resources is designed to enhance governance to protect the environment and traditional users while ensuring socio-economic benefits to society. Consequently, it is a valid and promising tool for assessing both the sustainability and feasibility of groundwater management at local, national and international levels.

Abstract

The occurrence of emerging organic contaminants (EOCs) in the aquatic environment is of no surprise since these are applied for various purposes daily. This study investigated the changes in EOCs concentrations in the water between 2019 and 2020. During rainy seasons, samples were collected from dams and surrounding boreholes in the Eastern Basin of the Witwatersrand Goldfields. During the first and second laboratory analyses, 24 and 11 analytes were screened in the water samples. The findings indicated that in 2020, compounds such as caffeine, sulfamethoxazole, atrazine and metolachlor displayed detection frequency exceeding 2019. This indicates that the occurrence of these compounds in the aquatic system has increased within a year. Whilst carbamazepine was still traced in 12 sites as previously observed in 2019, compounds estradiol, estrone, bisphenol A and ibuprofen were traced in fewer sites than they were detected in 2019. Compounds 4-nonylphenol, methylparaben, caffeine and atrazine were detected in all the samples analysed for 2019 and 2020, respectively. Antiretrovirals (ARVs) were analysed once and were detected in most sites, with efavirenz registering the highest (12/18) detection frequency. Assessing the occurrence of EOCs in boreholes according to the depth indicated that bisphenol A and estrone were traced in greater concentrations in deep than shallow aquifers, whilst the opposite was observed for atrazine. This study showed groundwater susceptibility to contamination by EOCs, with concentrations of most compounds increasing with time due to their high usage and improper sewer systems in the area.

Abstract

Salinization is one of the main threats to groundwater quality worldwide, affecting water security, crop productivity and biodiversity. The Horn of Africa, including eastern Ethiopia, northeast Kenya, Eritrea, Djibouti, and Somalia, has natural characteristics favouring high groundwater salinity. However, available salinity data are widely scattered, lacking a comprehensive overview of this hazard. To fill this gap, machine learning modelling was used to spatially predict patterns of high salinity with a dataset of 6300 groundwater quality measurements and various environmental predictors. Maps of groundwater salinity were produced for thresholds of 800, 1500 and 2500 μS/cm. The main drivers include precipitation, groundwater recharge, evaporation, ocean proximity, and fractured rocks. The combined overall model accuracy and area under the curve of multiple runs were both ~81%. The salinity maps highlight the uneven spatial distribution of salinity, with the affected areas mainly located in arid, flat lowlands.

These novel and high-resolution hazard maps (1 km2 resolution) further enable estimating the population potentially exposed to hazardous salinity levels. This analysis shows that about 11.5 million people (~7% of the total population) living in high-salinity areas, including 400,000 infants and half a million pregnant women, rely on groundwater for drinking. Somalia is the most affected country, with an estimated 5 million people potentially exposed. The created hazard maps are valuable decision-support tools for government agencies and water resource managers in helping direct salinity mitigation efforts

Abstract

Crystalline basement underlies much of Africa, and the groundwater within the shallow, weathered layer provides reliable drinking water for many people. This resource is key in adapting to changing climate, particularly in providing reliable water for drinking and smallscale irrigation. However, this requires higher yields from boreholes than currently abstracted. Renewed research is required to investigate sustainable yields from this type of aquifer and how it varies spatially. Recent work on crystalline basement rocks in Africa has shown that there are a number of important geological and geomorphological controls on shallow aquifer parameters; variability of geological properties and the impact of the landscape history is likely to have a strong control. Typically, the basement has experienced high metamorphic grades, which reduces intergranular porosity. Consequently, the aquifer relies on the presence of fault/ fracture zones; and the regolith’s depth and nature, which can have significantly higher porosity and permeability than the underlying bedrock. The interaction and variability of these key factors and climatic and landuse variables are likely to impact shallow aquifer productivity strongly. Here, we report on an ongoing study by UK and African scientists to understand how to represent the variability of geological, regolith and landscape factors across African crystalline basements. In tandem, a data-driven modelling approach is being used to examine these controls’ influence on groundwater yields. Continental-scale mapping of basement groundwater yield is planned, supporting those planning further aquifer development, including the growing use of solar-powered pumps.

Abstract

A mapping series was generated using the Vanrhynsdorp aquifer system to illustrate an improved standardization groundwater monitoring status reporting, that includes a progressive conceptual site model linked with spatial and temporal groundwater monitoring network assessment on an aquifer scale. The report consists of 4 segments: Base map provides a conceptual site model of a groundwater resource unit (GRU) delineating an area of 1456 km2 representing the geology and geological structures that make up the Vanrhynsdorp aquifer system.

The Groundwater Availability Map illustrated over a long-term trend analysis, the measured water levels indicate an 83% decreasing trend over an average period of 21.83 years, the water levels have declined by an average linear progression of 11.54 m (ranging 0.48-35.76 m) or 0.64 m per year, which equates to an estimated decline in storage of 218 Tm3 - 21 Mm3 within the GRU. The Groundwater EC map illustrated over the long-term analysis of an average period 24 years the average EC ranged between 57 - 791 mS/m, with certain areas tracking at a constant increasing trend beyond 1200 mS/m. The Groundwater Quality Characterization map provides EC contours and spatial Stiff diagram plots. The Stiff diagrams illustrate three aquifer water types namely, Na-Cl (Table Mountain Group Sandstones), Na-Cl with high SO4 concentration (Blouport and Aties Formation) and Na-Cl-HCO3 (Widouw Formation). These four segments of information products inform Resource Quality Objectives and the need for surveillance monitoring in conjunction with annual compliance monitoring and enforcement groundwater use audits.

Abstract

Various electrical potential difference-audio magnetotelluric (EPD-AMT) geophysical equipment is now available in the market for groundwater exploration, and the Groundwater Detector is one of them. Due to their low cost, deeper penetration, and real-time measurement, the technology has been widely received in many developing and underdeveloped countries. However, research to understand the application of the EPD-AMT surface geophysics approach in groundwater exploration is very limited. This research gap needs urgent attention to promote the technology’s meaningful and wider application. The lack of published case studies to demonstrate the capabilities of the EPD-AMT approach is a limiting factor to its application.

Research on different hydrogeological settings is paramount as part of the efforts to improve the practical understanding of the application of the EPD-AMT geophysical approach in groundwater exploration. This study shares field experience from applying the EPD-AMT Groundwater Detector geophysical technique to explore groundwater in dolomite, granite, and Karoo sandstone hardrock aquifers in Southern Africa.

Abstract

In response to the serious 2015-2018 “Day Zero” drought, the City of Cape Town implemented large-scale augmentation of the Western Cape Water Supply System from deep groundwater resources within the Table Mountain Group (TMG) fractured aquifers. Several planned TMG wellfields target the Steenbras-Brandvlei Mega-fault Zone (SBMZ), the northern segment of which hosts the Brandvlei hot spring (BHS) – the hottest (~70°C) and strongest (~4 million m3/yr) in the Western Cape. Considering its possible “neohydrotectonic” origin, the BHS may mark the site of a major palaeo-earthquake, suggesting that SBMZ structures are prone to failure in the current crustal stress regime. Despite the “stable” intraplate tectonic setting, the SW Cape has experienced historic large (magnitude >6) earthquakes. Therefore, a better hydrogeological and seismotectonic understanding of the regional “mega-fault” structures is needed.

The South African TrigNet array of continuously recording Global Navigational Satellite System (GNSS) stations can be used to measure surface deformation related to confined aquifer depressurisation and vertical compression during groundwater abstraction. Time-series data from 12 TrigNet stations were used to establish a monitoring baseline for the SW Cape. Observed vertical motions range from slow subsidence to variable slow uplift with superimposed cyclical uplift/depression patterns of seasonal and multi-year variability. Baseline deformation/strain rates were calculated using 27 station pair lengths, ranging between compressive (-0.47 nanostrains/yr) and extensive limits (+0.58 ns/yr), indicating a rigid intraplate setting.

Anomalous high strain rates (> 10 ns/yr), associated with three stations, are probably due to station mount/foundation issues, rather than neo-seismic activity. Regional results show that seismo-geodetic monitoring is an important tool for understanding fractured aquifer compressibility and hydroseismicity, the latter of which may potentially be induced by large-scale TMG groundwater abstraction and/or natural earthquakes in the Western Cape. A local seismo-geodetic monitoring system is therefore being established at Steenbras Wellfield for further observations and analysis.

Abstract

This study investigates and elaborates the development and testing of a multilevel sampling device. The primary purpose of this device is to achieve multilevel sampling in a well simultaneously, producing samples that are representative of the in situ groundwater. The device has been designed to have four different depths from which extraction of groundwater samples can be performed. Testing of the device involves a two-part process. A laboratory based testing and field based testing. The laboratory testing was done in a simulated well where three water tests were performed; normal tap water, salt water and hot boiling water. The field based testing was done on existing boreholes in the Rietvlei Wetland Reserve in the Western Cape. In the two processes involved, hydrochemical parameters were used to test for the efficiency of the device in terms of its working performance and to furthermore analyse the water chemistry which enables us to determine the water quality.

Abstract

Fourie, F

Communities reacted differently to the drought. In some cases, you would notice a proactive approach and good management of the wellfields. In other cases, communities have been under a misconception that they received good rainfall for a recharge which did not reflect in monitoring data, and lastly, you get the communities that are mismanaging the groundwater. Various lessons were learned from the change in the climate and environment. But a lot can be done to minimise the impact of these changes on the water supply to communities. This paper addresses the changes that we can apply to deal with the changing environment around us to provide a sustainable water supply. The changes can include relooking at operating rules to ensure better management on the aquifer and borehole level. Recharge determined during pump test must be considered periods low to no recharge. Methods to enhance the recharge to the aquifer will ensure recharge occur during low rainfall events By implementing these rules, groundwater can be sustainably managed for future use.

Abstract

Globally, cumulative plastic production since 1950 is estimated to have reached 2500 Mt of plastic. It is estimated up 60% of this plastic is either resting in landfills or the natural environment, including groundwater settings. Microplastics are small pieces of plastic ranging between 1μm – 5mm in size and have been found in every ecosystem and environment on the planet. Much of the available literature on microplastics is focused on marine environments with few in comparison focused on freshwater environments, and even fewer on groundwater settings.

The aim of this study is therefore to investigate the attenuation process responsible for influencing microplastic transport in saturated sands. This research will adapt colloid transport theory and experiments to better understand the movement of microplastics through sandy media. Saturated aquifer conditions will be set up and simulated using modified Darcy column experiments adapted from Freeze & Cherry (1979). Modified microplastics will be injected into the columns as tracers and the effluent concentrations measured by Fourier-transform infrared spectroscopy (FTIR). Breakthrough curves will then be plotted using the effluent concentrations to determine the attachment efficiency (α). It is expected the attachment efficiency will vary by microplastic type and size range. The Ionic strength of the solution flowing through the column and the surface charges of both microplastics and sandy surfaces are likely to influence the degree of attenuation observed. The relationship between different types of microplastics and collector surfaces from a charge perspective and their influence on the degree of attenuation will be evaluated.

Given the lack of literature, its ubiquitous presence and postulated effects on human health, this research is significant. Through this research, the transport and attenuation of microplastics through sandy aquifers can be better understood, and in the process inform future research and water resource management.

Abstract

The South African government is considering shale gas extraction in the Karoo basin, South Africa. To protect groundwater resources, there is an urgent need to do a groundwater baseline in possible gas extraction areas. Various groundwater samples have therefore been taken at a borehole and 2 soekor wells in the Northern Cape, from 2016 to 2021. The groundwater samples were analysed for dissolved gasses, specifically focussing on methane. As laboratories became more efficient ethane was also included in later analyses. From the analyses we found that drought might influence the dissolved gas concentrations in the groundwater via pressure influences on the groundwater flow and the dissolved gas flow towards the shallow aquifers. Artesian conditions at this site are helping with the flow of dissolved gasses from deep to shallow aquifers via preferential pathways. The possibility of shallow-deep groundwater interconnections and the migration of deep methane to shallow aquifers make it important to establish a groundwater baseline in the Karoo. By focusing on boreholes and wells that are emitting methane, a better understanding of groundwater flow and interaction with geological layers can be determined. If other gasses like propane and butane can be analysed in addition to methane, more information can be gathered to determine the origins of the methane and whether it is thermogenic or biogenic.

Abstract

The proximity of aquifer systems to sources of contamination exposes them to severe environmental threats. Pollutants that leak from petrol stations, industrial areas and landfills eventually seep through the vadose zone to reach shallow groundwater, leading to groundwater contamination. One of these pollutants is Methyl Tertiary-Butyl Ether (MTBE), which is a polar organic compound that is volatile at room temperature. As a result of its high solubility compared to other gasoline additives, MTBE can cause serious environmental issues. The aims of this study were to characterize the extent of MTBE in groundwater and characterize natural attenuation in a Saudi Arabian MTBE and methanol manufacturing company.

The aims were achieved by analyzing monthly MTBE concentrations (to observe the seasonal changes of MTBE) and annual MTBE concentrations (to observe long-term changes) in 5 out of 18. Groundwater samples were collected, and in each year the MTBE, Total organic carbon (TOC) and Electrical conductivity (EC) concentrations were recorded. Because of inconsistency in the data, the results for the monthly data were from 2007 to 2010, and from 2007 to 2012 for the annual data. The results indicated a positive relationship between MTBE and TOC, and as a result TOC can be used to monitor and indicate the presence of MTBE. There was plume growth in 2 of the 5 wells (well 4 and well 14) with well 4 recording the highest MTBE concentration in all years. The reason for the high concentration might be because of spillages during truck loading. The other 3 wells showed signs of natural attenuation. Results from seasonal data suggested that temperature influences MTBE concentrations and therefore the rate of natural attenuation. There are many methods to remediate MTBE and each of them is site specific, but bioremediation was recommended for this site due to its cost-effectiveness.

Abstract

Kürstein, J;  Thorn, P; Vermaak, N; Kotzé, YL; Pedersen, PG; Linneberg, MS; Fourie, F; Magingi, A

Water supply relies entirely on groundwater in Denmark. A national groundwater mapping programme was established in 2000 to protect this valuable resource. It builds on a thorough and holistic understanding of the hydrogeological settings, obtained through an extensive data collection, culminating with an identification of threats and aquifer vulnerablility. As part of the programme, new approaches, methods, and instruments have been developed, such as airborne geophysical survey by Sky-TEM that allows the mapping of large areas in a fine resolution. Another key element in the mapping is the development of three-dimensional hydrogeological and numerical models. These are used to understand the groundwater flow paths and delineate wellhead capture zones as well as infiltration areas, which, depending on the assessed vulnerability, may be subject to protective measures.

The Danish mapping approach have been tested at selected South African sites through the Strategic Sector Cooperation (SSC) between Denmark and South Africa. The approach was applied in a study supporting Umgeni Water to identify groundwater resources to supply numerous villages near the town of Ladysmith. The study illustrated a high potential for adapting relevant parts of the Danish approach to South Africa, but also revealed some challenges, e.g. related to the fractured geology, where groundwater recharge can be concentrated along dykes, a process very different from what is generally observed in Denmark.

The SSC has initialised the project “South African Groundwater Mapping and Assessment Approach (SAGMAA)” to share knowledge gain through the national groundwater mapping programme in Denmark with South Africa and explore the possibility of adapting elements from the Danish approach to South African conditions in a broader context. The objective of the project is to provide recommendations to South African guidelines, and the paper will present results from the comparison of approaches in the two countries and preliminary recommendations to guidelines.

Abstract

The Smuts House in Centurion is under threat of subsidence due to sinkholes. These sinkholes are linked to the Malmani Dolomite Formation, a Proterozoic carbonate sequence within the Chuniespoort Group of the Transvaal Supergroup, and is subject to sinkhole development (Clay, 1981). In addition to Smuts House, the areas are populated by thousands of people meaning risk of financial damage and, in some cases, loss of property and lives (Trollip, 2006).

The Jan Smuts House Museum is located in a natural park of indigenous trees and shrubs. The area is generally flat-lying; however, various ridges bisect the site in a north-south trend. A koppie (Cornwall Hill) is situated in the north. Outcrops of dolomite and chert characterise most of the study area. The two major streams in the area are that of the Sesmylspruit and Olifantspruit.

This study was undertaken to examine the relationship between subsidence of the Smuts House Museum, subsurface features (geological and anthropogenic) and the local geology. Magnetic and resistivity, active seismic and ground-penetrating radar (GPR) geophysical data were collected, along with x-ray fluorescence (XRF) geochemical data and hydrogeological data.

Abstract

Enslin,S; Webb, SJ

The Vredefort Dome 120 km southwest of Johannesburg is a meteorite impact crater that formed at approximately 2 Ga. The region hosts farmland, and the town of Parys is situated in the northwestern part of the dome. The dome is the location of the annual Wits University/AfricaArray Geophysical Field School. The aim of the field school is to teach geoscience students several geophysical techniques while conducting scientific research in the area.

A geophysical survey during the 2019 field school over an open field just outside of Parys revealed a buried fracture that hosts ground water. A 150 m long magnetic profile over the fractures shows a magnetic low (approximately 500 nT) that correlates with a low resistivity region on the inverted electrical resistivity data (dipole-dipole method). Euler deconvolution depth estimates and magnetic modelling estimate an overburden thickness of around 10 m and a similar fracture thickness. The magnetic low of the fracture is due to weathering and removal of any magnetic material in the granites in the region.

Two existing boreholes that lie 618m due south and at a 10 m lower elevation have water levels of around 6.4 m. Both boreholes lie near a riverbed and vegetation, and appear to lie along an extension to the fracture. This fractures detected using geophysical methods seems to form part of a larger fracture system within the Vredefort Dome, that is linked to the formation of the dome. These fractures provide a vital source of water for the local farming community.

Abstract

Wiegmans, FE

The increasing water demand for the Northern Cape Province resulted in the detailed assessment of the exploitation potential of three groundwater development target areas namely SD1, SD2 and SD4, largely underlain by karst aquifers. Since 2014 the implementation of the wellfields was delayed pending authorisation. The potential impact on the groundwater resources was raised by several stakeholders as part of the process, resulting in the re-assessment of the SD1 and SD2 wellfields. The model update considered crucial data retrieved from several groundwater level loggers from April 2014 to December 2019. As a precursor to the model update the Cumulative Rainfall Departure (CRD) curves for the relevant rainfall stations for the study areas was updated. While for most sites a good relationship between rainfall and groundwater fluctuations was observed. A poor response of groundwater levels in comparison to the observed CRD curve suggests abstractions more than the recharge of the aquifer. Metered groundwater use is for most parts not available but was estimated based on the hydrocensus data. Once the models demonstrated to reproduce past behaviour, they were used to forecast the future behaviour. More importantly was to assess whether the 2014 proposed abstraction rates still held true after the re-calibration of the model. Several simulations were carried out iteratively to identify the optimal pumping rates and the temporal variability of the withdrawal period considering the impact on the groundwater resource. Based on the results the 2014 proposed production rates were reduced from 751,608 m3/month to 597,432 m3/month representing a 2019 mitigated (optimised) proposed abstraction scenario. The case study is an excellent example of adaptive groundwater management informed by crucial datasets and scenario modelling.

Abstract

Water is regarded as a source of life and access to potable water supply delivery remains the building block to improving and maintaining the community member’s health and productive life. The demand for water supply has been increasing due to population growth and climate change phenomena. Hence, there is need to assess the current state of potable water supply system in selected rural areas of Vhembe District Municipality (VDM), South Africa. About 14 villages in VDM were visited to assess the state of water supply. Interview were held with three municipal officials who deals with water supply systems and 14 focus group discussions were held in each village with the communities and their leaders. 448 head of households, 14 councillors completed the questionnaires on potable water supply situation in their area. The results indicated that the main sources of water supply are boreholes followed by tap water from dams. In areas where the two sources are not available, the rivers, fountain and the water tankers were also the main sources. In terms of water usage, the boreholes recorded the highest responses of 45% from households, followed by the tap water from dams at 35%, 4% from rivers, 5% from fountain and 10% from water tankers. In addition, about 53.6% of participants collect water once a week from the main source (boreholes and tap water from dams). Rural communities of Vhembe District Municipality were not satisfied with the quantity, distance and reliability of boreholes. Therefore, this article recommended that the municipality, communities, councillors and traditional leaders should work together in addressing the pressing water issues. Part of which include provision of more sources of water to complement growing population. In addition, village water committees need to be established to assist in water provision management.

Abstract

Lourens, PJ

West of the world-renowned conservation site, Kruger National Park, lies the larger extent of the Greater Kruger National Park within the Limpopo province. Boreholes have been drilled here in the last few decades to century for the provision of water supply to game lodges, large resorts, watering holes for game viewing and also historically for agriculture and livestock. The area contains both primary and secondary aquifers classified as having yields between 0.5 and 5.0 l/s, based on the geological setting which consist of gneiss intruded by dolerite dyke swarms. A geohydrological assessment of the area revealed that groundwater quality within the project area is characterised as having an EC of 100 - 450 mS/m, which seems to link to borehole proximity to surface water systems. The Makhutswi Gneiss and Doleritic Dyke swarms are the major controlling geology of the area, with higher yielding boreholes located in close proximity to dykes and major structural lineaments (faulted / weathered zones) of the Gneiss. A major concern identified through geohydrological assessment and hydrocensus observations is that boreholes frequently dry up after a few years and require either deeper drilling / redrilling or drilling a new borehole and that the very aggressive calcium hardness in the water frequently damages equipment and leads to overall higher maintenance costs. This project investigates the feasibility of increasing recharge to the aquifer with seasonal flooding / rainfall events by constructing artificially enhanced recharge locations overlaying several doleritic dykes. This is expected to decrease the salinity and hardness of the groundwater, which will reduce operational costs. Water security will also be increased through enhanced long-term sustainability of the groundwater by balancing some of the current annual abstraction.

Abstract

The West Coast in the Western Cape of South Africa is a water-scarce area. With pressure from population and industrial growth, recurring droughts and climate change, there is increasing urgency in the West Coast to protect groundwater resources. Saldanha Bay is dependent on groundwater as part of its bulk water supply system. Where the natural groundwater recharge is no longer sufficient to meet the growing groundwater needs, practices such as Managed Aquifer Recharge (MAR) can be used to ensure the sustainability of these groundwater resources.

This study aims to identify areas within the Saldanha Bay Local Municipality suitable for Managed Aquifer Recharge to maximize the water available during periods of limited surface water supply. As such, the MAR study site identification requires a comprehensive geohydrological assessment of the Saldanha Bay aquifer. This includes an understanding of the quality and quantity of the source water available for recharge, the aquifer structure and hydraulic properties, the space available to store water, and the compatibility of the recharged water with the groundwater.

MAR research methods included Time Domain Electromagnetic (TDEM) airborne geophysical surveys, infiltration tests, pumping tests and hydrochemical analysis. TDEM surveys provided clarity on the various aquifer geological properties. Infiltration and pumping tests shed light on the horizontal and vertical hydraulic properties of the aquifer. PhreeqC modelling outputs helped predict the outcome of the mixing between groundwater and potential MAR water resources.

Geological features were delineated through TDEM surveys and inferred five suitable MAR sites where clay layers were missing. Infiltration and pumping tests showed that Langebaan Road is better suited to borehole injection, whereas Hopefield has the benefit of infiltration MAR techniques as an additional option. PhreeqC outputs exhibit that both pipeline and Berg River water show promising results as potential source water resources for MAR as compared to other resources.

Abstract

The year 2020 will forever be synonymous with the Covid-19 pandemic and the immeasurable impact it has had on all our lives. During this time, there was one avenue that reigned supreme: technology. Whether it was Zoom calls or Netflix, online consultations or video conferencing at work, technology took charge. In light of this, GCS (Pty) Ltd started exploring ways that technology could assist with the most common problem identified in the Water and Environmental sectors, which is the management of large volumes of geodata. Thus, the invention of eSymon.

Monitoring of the environment usually generates a significant amount of data. If this data is not systematically stored, problems often arise with:

• Limited access to historical data due to poor storage;

• Different formats of stored data (if they are kept in digital form at all);

• Continuity and integrity of the data; and

• Security of the data.

Therefore, years of historical data cannot be used or trusted. The solution was to develop eSymon, which is an acronym for Electronic Data Management System for Monitoring. eSymon is primarily designed to:

• Systematically import, store, view and manipulate large volumes of monitoring data;

• Provide remote and instantaneous access to site-specific information;

• Allow data visualization using an interactive GIS interface; and

• Create various outputs such as time series graphs, geochemical diagrams and contour maps.

The main idea of the software is to have all historical data for a site on one platform and have it be accessible and functional at the touch of a button. This results in several key benefits, including saving time, providing accurate and up to date information, not having to wait for technical reports to assess trends and compliance, providing several means of data visualization and, most importantly, ensuring data security.

Abstract

This study is based on the presence and concentration of antiretroviral drugs in water bodies around the Western Cape Province in South Africa, these areas include wastewater treatment plants, water treatment plants, stormwater, and landfill boreholes. South Africa has the highest rate of HIV and AIDS in the entire world, statistics from 2018 show that 7.7 million South Africans are infected with HIV/AIDS and 68% of them are on antiretroviral treatment (UNAIDS). South Africa has the largest antiretroviral treatment program (ART) in the world, due to the lack of proper water and sanitation these drugs are deposited in the environment poorly and reach water bodies, therefore, contaminating them. This study involves the collection of samples from areas such as Mitchell’s Plain, Khayelitsha, Athlone, Cape Flats, and Atlantis around the western cape, these samples are analyzed to determine the presence of 5 antiretroviral drugs used in South Africa which are Efavirens, Lopinavir, Nevirapine, Ritonavir, and Tenofovir. Water samples are prepared for analysis by filtering 2.5ml water through a 1µm glass fiber filter, the sample is then placed into sample vials and analyzed on HPLC-QTOF/MS. Mass Hunter software is used to identify the specific ARVs in the water samples analyzed, by searching for the compounds via their chemical formulas. With a match made if their chemical formula, retention time and mass to charge ratio of the compounds correspond. Concentrations range between 0.0855ng/ml Nevapine to 4.3289ng/ml Lopinavir, this analysis has determined that all the mentioned antiretroviral drugs are indeed present in different water bodies around the identified areas within the Western Cape in varying concentrations.

Abstract

During 2017-2018, the City of Cape Town, South Africa faced an unprecedented drought crisis with the six main water storages supplying Cape Town falling to a combined capacity of just under 20%. With the threat of severe water shortages looming, various additional water sources were examined to supplement the municipal water supply network. These were focussed on groundwater, desalination and treated effluent. However, private citizens and businesses also made plans to avoid shortages, resulting in numerous uncontrolled water sources competing with the municipal supply network. Throughout the crisis, groundwater was considered the most important alternative urban water supply source but also the most vulnerable to contamination through accidental and uncontrolled return flows from the municipal network, private residences and agricultural industries. This project aims to constrain the water supply network in the Stellenbosch municipality and monitor the augmentation of groundwater into the network using stable isotopes. Long term monitoring points have been established at 35 tap water sites, 20 private wells as well as at the supply reservoirs that feed the municipal network. Preliminary data show’s distinct isotopic signals associated with each supply reservoir as well as in the local groundwater. The data also shows significant return flow into the alluvial aquifer system during warmer months when private stakeholder’s water consumption is at its highest. Groundwater is expected to supplement this urban supply network in the latter part of 2021 and will likely disrupt the current distribution of stable isotopes in the network, providing further insight into the potential return flow into the local groundwater system.

Abstract

Saldanha Bay Local Municipality appointed Skytem to conduct an airborne geophysical 3D aquifer mapping survey. As part of improving the sustainable management of the groundwater resources and exploring the options of Managed Aquifer Recharge, a better understanding of the aquifers is required. The Skytem technology unlocked a rich understanding of the subsurface geology and the groundwater contained in it.

Before the main survey commenced, a trial survey was conducted to investigate the quality of the data that may be expected from the main survey. The trial survey was conducted over the existing water supply wellfield where there were existing groundwater data including borehole lithology from drilling and ground geophysics. Consequently, the main survey commenced and consisted of the following:
1) Magnetic survey providing information regarding bedrock composition and where it changes due to faults or deposition,
2) Time Domain Electromagnetic survey providing conductivity/resistivity of the subsurface,
3) Detailed elevation along flight paths, and
4) 50Hz signal to understand where interferences can be due to power lines.

The survey interpretation showed the following important aquifer characteristics that will be useful for future management of the aquifer system:
1) Bedrock elevation and paleo topography, 2) Areas with different bedrock composition, 3) Geological faults in the bedrock, 4) Bedrock below the surface, 5) Areas with thick dry sand, 6) Clay layer extent and area without clay, 7) Areas with different water quality, and 8) Areas with very high concentrations of salt.

The survey output and interpretations are regarded as very useful for the update of the conceptual models for the area. Data can now be used to update the numerical models and improve the management of the wellfields.

Abstract

Monitoring groundwater storage is conducted in the study. World Health Organisation estimates, about 55 million people affected by drought yearly. However, Surface water holds 0.3 percent of the freshwater, and groundwater holds 30.1 percent of the freshwater. Hence, monitoring groundwater storage is vital. Though the GRACE (Gravity Recovery And Climate Experiment) satellite provides global-scale groundwater data, but does not provide any information about changes in groundwater flow systems and has uncertainties, due to large noise produced. A correlation has to be established between gravity changes and groundwater storage variations through a program that simulates the flow of groundwater. The relationship between developed numerical models and data derived from superconducting gravity is imperative. This study is conducted in South African Geodynamic Observatory Sutherland (SAGOS) area at Sutherland, South Africa. The study aims to develop a numerical geohydrological model to monitor subsurface variations in water distribution through superconducting gravimeters (SG) records. The interpretation of the SG measurements to directly compare to one another at a higher resolution is considered in the study, through the correlation of the developed model and installed superconducting gravimetric residual data. A numerical groundwater flow model is developed using model muse on MODFLOW. Assigned boundary conditions, fractured rocks were activated by the model. Hydraulic conductivities were simulated for any layer, including storage coefficient. Hence, hydraulic conductivity is an important aspect of the study. In conclusion, gravity is an excellent tool for measuring groundwater recharge within the immediate vicinity of the SAGOS. This implies that gravity can aid in monitoring groundwater recharge and discharge in semi-arid areas. The application of the hydrological model at various scales comparing the Superconducting Gravimeter and GRACE satellite data is paramount to improve modelling groundwater dynamics. The consideration of developing numerical hydrological to monitor groundwater storage will add much value to missing information.

Abstract

Managed aquifer recharge (MAR), the purposeful recharge of water to aquifers for subsequent recovery, is used globally to replenish over-exploited groundwater resources and to prevent saltwater intrusion. Due to increased water shortage worldwide, there is a growing interest in using unconventional water resources for MAR such as reclaimed water or surface water impaired by wastewater discharges. This, however, raises major concerns related to pollution of our drinking water resources. MARSA is a new Danish-South African research project aiming at developing MAR technologies allowing a broader span of water resources to be used for MAR, including storm water, river water, saline water, and even treated wastewater. It is hypothesised that improved removal of organic pollutants, nitrogen species, antibiotic resistance, and pathogens can be achieved by establishment of reactive barriers or creation of different redox environments through injection of oxidizing agents to anaerobic aquifers during recharge. In MARSA we will carry out feasibility studies, as flow-through columns, first in Denmark and later in South Africa, to investigate the capacity of South African aquifer sediments to remove organic pollutants, nitrogen species, antibiotic resistance genes, and pathogens. Then, based on these studies, MAR options will be further investigated at field conditions in South Africa using real source water from MAR sites. For this presentation we will give an overview of the MARSA-project and show results from previous feasibility studies investigating the potential of reactive barriers to remove organic micropollutants and ammonium. These studies have shown that establishment of reactive barriers will cause oxygen depletion, but also more efficient ammonium and organic micro-pollutant removal. MARSA is funded by the DANIDA fellowship centre, Ministry of Foreign Affairs of Denmark. Project no. 20-M03GEUS.

Abstract

It has become increasingly apparent that understanding fractured rock mechanics as well as the interactions and exchanges between groundwater and surface water systems are crucial considering the increase in demand of each in recent years. Especially in a time where long term sustainability is of great importance for many water management agencies, groundwater professionals and the average water users. Previous callow experience has shown that there is a misunderstanding in the correct interpretation and analyses of pumping test data. The fracture characterisation (FC) method software provides a most useful tool in the overall understanding of a fractured rock aquifer, quantification of the aquifer’s hydraulic (flow regime and flow boundary conditions) and physical properties, only if the time-drawdown relationships are correctly interpreted and when the theoretical application principles are applied. Interpretation is not simply a copy and paste of the aquifer test data into the software to get a quick answer (especially when project time constraints are considered), however, recent experiences with numerous field examples, required intricate understanding of the geological environment, intended use and abstraction schedules coupled with the academic applications on which the software was based for correct interpretation.

Through the application of correct interpretation principles, a plethora of flow information becomes available, of which examples will be provided in the presentation itself. By achieving this, flow can be conceptualised for inputs into a conservative scale three-dimensional numerical flow model and calibrated based on measurable data in a fraction of the time of a conventional regional model. Although higher confidence levels are achieved with these practical solutions, monitoring programmes are still required to provide better insight of the aquifer responses to long-term abstraction and recovery.

Abstract

Mabenge B; Famah FIB

Groundwater resources are under increased pressure from population growth, climate change and human activities, leading to widespread groundwater depletion and pollution. It is important, as groundwater professionals to communicate to the younger generation and the broader community, about this vital resource. The Groundwater Kids Educational Program was initiated in November 2020, to educate and share groundwater knowledge amongst primary and high school learners. The program consists of a series of 1 – 2 hour groundwater educational workshops held at schools throughout Gauteng Province. Each workshop comprises a short educational video clip on a selected groundwater topic, followed by an activity that involves the topic of the day, and distribution of groundwater awareness material. Lessons are prepared based on the age group and the level of comprehension of the learners. Learners get the opportunity to engage in activities designed to make learning about groundwater more exciting. These workshops provide a knowledge base for our children participate in efforts to save this resource in generations to come.

Abstract

Israel, S; Kanyerere, T

Globally, surface waters are severely unsustainably exploited and under pressure in semi-arid coastal regions, which results in increasing demand for groundwater resources. Currently, Cape Town and its neighbouring towns along the West Coast of South Africa are facing water shortage related problems. Managed Aquifer Recharge (MAR) is a nature based solution to improve groundwater security in drought prone regions such as the West Coast. The objective of this study was to design a groundwater monitoring network using a hybrid hydrochemical, geophysical and numerical modelling approach to assess and mitigate the potential impacts of MAR for the West Coast Aquifer System (WCAS). An Analytical Hierarchy Process method was used to perform a Multi-criteria analysis employed in GIS (ArcMap 10.3).

The factors of importance for optimized groundwater monitoring network design were based on available data and consultations with hydrogeologists and environmental scientist at stakeholder workshops. The factors which were considered included: elevation (m), geology, density of existing boreholes (wells/km2), electrical conductivity (mS/m), water rise (m), water level decline (m), transmissivity (m/day), saturation indices and lithological thickness (m). Factors were weighted based on their level of importance for the design of the groundwater monitoring network using Analytical Hierarchy Process (AHP). Priorities were calculated from pairwise comparisons using the AHP with Eigen vector method. The Consistency Ratio (CR) calculated was 5.2% which deems the weighting coefficients statistically acceptable. The results show that high priority monitoring areas occurs in the areas where there are fresh groundwater, high borehole density, elevated topography, higher recharge rates and decline in water levels are found. The monitoring network will include boreholes from the low priority areas to ensure that hydrogeological conditions are monitored and impacts are not worsened. Geophysical, numerical and chemical modelling aspects of the methodological approach will be incorporated into the initial groundwater monitoring network design.

 

Abstract

With increasing population growth and a subsequently increased demand for food production, the agricultural sector has had to grow and develop continuously despite drought-stricken water resources in recent years. The expansion in this sector requires increasingly efficient water use management and increases in water supplies, which are often met through groundwater utilization. In the past several years the use of groundwater in the Western Cape has increased exponentially and thus has forced the sharing of resources. The question pertains to how an invisible water resource that is difficult to measure and quantify, can be shared. Issues of varying complexities can arise when submitting a water use licence application (WULA), such as historical water use debates, interactions between groundwater and surface water, seasonal stresses on resources, etc. In one case study in De Doorns, a WULA became side-tracked soon after initiation by a neighbour’s complaint that his production borehole was severely affected by the drilling of the applicant’s boreholes. In the second case study in the Hexriver Valley, a WULA was complicated by a gentleman’s agreement stating that no one in the valley is allowed to abstract groundwater from deeper than 6 m. This gentleman’s agreement stems from past disagreements regarding such practices. The final case study was not a WULA but arose out of concerns for dropping weir levels connected to a new borehole. The borehole was equipped with new casing to case off the alluvium; it was suspected to be the cause of the disturbance. The scientific method was used to evaluate the borehole’s impact on the weir. Case studies such as these will become more prevalent as the demand on water resources will increase. Hydrogeologists needs to more informed of the complexities that can and will arise in the future as a result of shared water resources.

Abstract

The impact of the future closure of the KROPZ phosphate mine in the West Coast on the various potential receptors including the underlying Elandsfontein Aquifer System (EAS), Langebaan Lagoon (RAMSAR-site) and wetlands were assessed. This abstract/paper describes the geochemical characterization and management options related to the waste streams from the mining activity, to assess the post closure contribution to groundwater flow from the mine towards potential receptors. The PHREEQC geochemical modelling code was used to predict potential mine water impacts. The input water quality parameters used in the model included: background groundwater quality, pit water and processed water generated from phosphate separation process at the mine. Various scenarios were simulated combining the different process water streams with the tailings and soft stockpile material at the mine. The geochemical predictions showed some management options that should be prevented, while also providing guidance to promising options where most of the chemical parameters does not exceed the WUL stage 1 thresholds. There is however, an increase in sulphate concentrations that need attending to before the mine goes into production phase. Currently there seems to be no immediate concern on the Lagoon relating to the prediction of mine water impacts post mine closure. Some of the management scenarios do however show low levels of potential impacts on SANParks property 100 years post closure. These predictions do however correlate to areas where limited calibration data is available. At the time of this abstract the sites for new boreholes have been selected and the initial boreholes are being drilled to confirm aquifer properties in areas with limited data.

Abstract

The study area is located in a Swiss alpine valley at the border between Switzerland and France and is situated in Valais. It is delimited by the hydrologic catchment of the river “La Vièze de Morgins”. The catchment area is situated in the Municipality of Troistorrents and of Monthey. Its population is approximately 4500 inhabitants. From the geological point of view, the valley “Val de Morgins” is mostly comprised of sedimentary rocks, amongst others breccia, schist, flysch, limestone, and quaternary sediments. The valley is affected by several natural hazards, such as landslides, rockfalls, and avalanches. Hydrogeologically, the valley contains few main springs that are outlets of porous and fissured aquifers. For this study, an inventory and monitoring of springs and rivers has been carried out since 2018 until April 2021. Particularly, more than 110 springs and rivers have been registered and observed during this time. The data includes GPS coordinates, photos, measurements of physical-chemical parameters and flowrates. Complementary to measurements, specific geological and topographical maps, and site information have been gathered. The analysis and interpretation of this huge set of hydrogeological data will be concluded with a new and innovative approach using different data science libraries that are implemented for the Python programming language. In this case study, groundwater sampling training is used to increase the understanding of the water quality. Four years of field measurements enable a better understanding of the parameter variability in relation to seasonality. Furthermore, new data analysis can aid the integrated resource management for the municipal water supply. The sampling and monitoring are key aspects to ensure water security, in terms of quality and volume. Additionally, it can also unlock prospective groundwater resources for municipal water supply. Case study data will also be compared with South African and other Swiss dataset of similar aquifer type.

Abstract

Ewart Smith, J; Snaddon, K; de Beer, J; Murray, K; Harillal, Z; Frenzel, P; Lasher-Scheepers, C

Various analysis techniques are available for assessing the groundwater dependence of ecosystems. Hydrogeological monitoring within the Kogelberg and greater Table Mountain Group (TMG) aquifer has provided various datasets from multiple scientific disciplines (hydrological, hydrogeological, geochemical, climatic, ecological and botanical). Using a variety of analysis techniques, and using the Kogelberg as a case study, this paper assesses the groundwater dependence of several ecological sites (wetlands and streams). The starting point is a sound geological and hydrogeological conceptualisation of the site. The approach involves conceptualisation and analysis within each scientific discipline, but also requires bridging between areas of specialisation and analysis of a variety of datasets. This paper presents the data and analyses undertaken and the relevant results as they pertain to several sites within the Kogelberg.

Abstract

Estimating pumping rates for the purpose of equipping boreholes with suitable pumps that will not over abstract either the boreholes or the aquifer(s) that are intersected is often assessed through test pumping of the boreholes prior to pump selection. While the South African National Standard has guidelines on the methodologies and durations of these tests (SANS 10299-4:2003), many production boreholes in the agricultural and industrial sectors are still equipped based upon so called Farmer Tests or Pump Inlet Tests (PIT), often of a short (6-24 hour) duration. These tests are also frequently and incorrectly confused with a Constant Head Test (CHT), both of which are different in methodology to SANS 10299-4:2003 testing, which relies to a high degree on data collected during a Constant Discharge/Rate Test (CDT or CRT) and recovery thereafter. The study will assess differences in test pumping methodology, data collection, analysis methodology and final recommendations made between Farmer Tests and SANS 10299-4:2003 methodology tests for 20 boreholes in which both tests were performed. The selected sites cover a variety of geological and hydrogeological settings in the Western Cape. Test comparisons include boreholes drilled into the Malmesbury Group, Table Mountain Group and Quaternary alluvial deposits, with tested yields ranging from 0.5 – 25 L/s.

Abstract

Maphumulo B; Mahed G

Disastrous droughts sweeping across South Africa has led to the population turning towards groundwater as their primary source of water. This groundwater movement has increased the need for proper groundwater management in terms of both quality and quantity. Groundwater sampling is a crucial, and yet often overlooked, component of water quality assessment and management. This thesis evaluated the various groundwater sampling methods used within fractured rock aquifers in the Beaufort West region. Each sampling method was evaluated in terms of their precision and accuracy according to their hydrochemical results. Historical hydrochemical data from past reports was utilised to determine how various groundwater sampling techniques influence results. This helped gained a better understanding of the requirements required to correctly and accurately sample different water sources such as boreholes and windmills. These requirements include the importance of purging in order to remove stagnant water from windmills. By understanding these sampling techniques, it is possible to create a groundwater sampling protocol which should be followed when sampling fractured rock aquifer in order to ensure best possible results.

Abstract

Approximately 982 km3 /annum of the world’s groundwater reserve is abstracted, providing almost half of all drinking water worldwide. Globally, 70% is used for agricultural purposes while 38% for irrigation.

Most water resources of South Africa are threatened by contamination caused by industrial, agricultural, and commercial activities, and many parts of the country face ongoing drought with an urgent need to find alternative freshwater sources, such as groundwater. Groundwater constitutes approximately 15% of the total volume consumed, hence it is an important resource that supplements insufficient surface water supplies across South Africa.

Very little attention has been afforded to understanding the anthropogenically altered vadose zone as a potential source or buffer to groundwater contamination. This is evident from few research studies that has applied multiple isotopic tracers to characterise this zone. Most subsurface systems in South Africa are characterised by fractures, whereby flow and transport are concentrated along preferential flow paths.

This study aims to evaluate the performance of different tracer classes (environmental and artificial) with one another, and create a better understanding of the hydraulic properties, mean residence time and transport mechanisms of these tracers. The influence of unsaturated zone thickness on recharge mechanisms will also be evaluated.

Site visits will be conducted for the proposed study areas, and the neighbouring sources of contamination will be assessed. The matric potential and unsaturated hydraulic conductivities will be measured using various techniques. Water samples will be collected and analysed for the various tracers from the vadose zone using gravity lysimeters including suction cups. Several tracers will also be injected into boreholes where samples will be collected to calculate tracer residence times (BTC’s) and further constrain the hydraulic properties of the vadose zone. All samples will be analysed, interpreted, and simulated using the numerical finite-element modelling code SPRING, developed by delta h. The software derives quantitative results for groundwater flow and transport problems in the saturated and unsaturated zones of an aquifer.

The research is expected to provide more insight into the selection and use of environmental and artificial tracers as markers for detecting, understanding the transport processes and pathways of contaminants in typical altered South African subsurface environments. The impact derived improved characterisation of the pathways, transport, and migration processes of contaminants, leading to groundwater protection strategies and appropriate conceptual and numerical models. The output from this study will determine the vertical and horizontal flux for both saturated and unsaturated conditions.

Abstract

Stringent drinking water standards for constituents like chromium, arsenic, and nitrates, combined with continually higher demand for groundwater resources have led to the need for more efficient and accurate well characterization. Many boreholes are screened across multiple aquifers to maximize groundwater production, and since these aquifers can have different water qualities, the water produced at the wellhead is a blend of the various water qualities. Furthermore, the water entering a well may not be distributed equally across the screened intervals, but instead be highly variable based on the transmissivity of the aquifers, the depth of the pump intake, the pumping rate, and whether any perforations are sealed off due to physical, chemical, or biological plugging. By identifying zones of high and low flows and differing water qualities, well profiling is a proven technology that helps optimize operational groundwater production from water supply boreholes or remediation systems. This frequently results in increased efficiencies and reduced treatment costs. By accurately defining groundwater quantity and quality, dynamic profiling provides the data needed to optimize well designs. Conventional exploration methods frequently rely on selecting well screen intervals based on performing and analyzing drill stem tests for one zone at a time. Using dynamic flow and water quality profiling, the transmissivity and water quality can be determined for multiple production zones in a matter of one to two days. It also allows the location and size of the test intervals to be adjusted in the field, based on real-time measurements.

In this paper we discuss dynamic well profiling techniques with project case examples of characterization different types groundwater boreholes for a variety of applications and industries resulting in significant cost saving and sustainable water abstraction.

Abstract

As populations, agricultural and industrial demands grow with time, increasing attention is placed on developing groundwater resources in a sustainable manner. At the small, local scale, this tends to involve exploration (scientific and otherwise) and test pumping (also subject to more and less scientific methods). While there can be some subjectivity in the analysis of scientific test pumping data (the selection of representative periods of drawdown stability, the inclusion of potential boundary conditions and the estimation of available drawdown), published methodologies such as the FC method (2001) and the Q20 (1959) and R20 (2006) concepts attempt to calculate sustainable abstraction rates based on these tests. At a larger catchment or aquifer scale, water balance estimates of inflows, storage and outflows are also used to estimate the effects of groundwater abstraction within such a “water budget”. This can be done conceptually, but is often also through a numerical model. A drawback of such methods is the difficulty in estimating representative annual inflow volumes, such as groundwater recharge. One such methodology is the Aquifer Firm Yield Model (2012) which assesses sustainable groundwater supplies based on threshold recharge inflows, baseflow and evapotranspiration outflows, and a 5 m aquifer saturated fluctuation limit. While this was intended for use at a preliminary stage of investigations, before sufficient hydrogeological data would be available for a numerical model, it nonetheless provides an estimate of the available groundwater for abstraction based on a water budget concept rather than test pumping data analysis. A comparison of the results of these two approaches is provided for several newly developed municipal production boreholes in the Karoo to compare where the assumptions inherent to each approach may be highlighted by noticeable differences in results.