Conference Abstracts

All Abstracts were presented at the Groundwater Conferences

Displaying 551 - 600 of 795 results
Title Presenter Name Presenter Surname Area Conference year Sort descending Keywords

Abstract

Modie LT; Stephens M

Stable isotopes and hydrochemical analysis were undertaken to investigate groundwater-surface water (GW-SW) interactions and their possible implications on the quality and quantity of water in the karstified dolomite-dominated Notwane River Catchment (NRC) in semi-arid South East (SE) Botswana. Stable isotopes (δ18O & δ2H) and other hydrochemical parameters were analyzed from water samples (groundwater, river water and rain) collected in the upstream, middle stream and downstream of the Ramotswa Wellfields to investigate the potential GW-SW relationship in the study area. In addition field observation were also undertaken to support results obtained through stable isotopes and hydrochemical methods. Similarity in isotopic signatures taken during the dry and wet seasons respectively for groundwater (δ18O -1.4‰, δ2H -10.8‰; δ18O 1.4-‰, δ2H -10.9‰) and surface water(δ18O -2.04‰, δ2H -6.2 ‰; δ18O -2.56‰, δ2H -7.1‰) suggests groundwater recharge through the streambed at a site further downstream in the study area. In upstream study sites the average groundwater isotopic signature values of (δ2H -24.1,δ18O -4.1) suggests a more direct link to the Meteoric Water Line(MWL) indicating possibility of a rapid infiltration and quick watershed response to heavier rainfall events(δ2H -51.7, δ18O -8.6) rather than recharge through the riverbed. A further assessment on the GW-SW hydrochemistry was provided using Hierarchical Cluster Analysis (HCA) to investigate the influence of groundwater on stream water. The median EC values from the clusters are in an increasing order Cluster A-B2-B1 indicating cluster A(all river samples) as the most dilute samples with the shortest resident time relative to the groundwater clusters(B2 and B1). These results therefore rules out groundwater discharge through the streambed into the river as not a dominant process for GW-SW interaction in the study area. The study has concluded that GW-SW interactions in the NRC part under study vary from connected to no connection from one site to another.

Abstract

Sternophysingids are a group of stygobitic amphipods that inhabit groundwater networks characterised by large fractures, cracks and voids, as well as smaller pores, fissures, cavernous openings and interstitial spaces. Two species occurring in Gauteng, South Africa, Sternophysinx filaris and Sternophysinx calceola, were studied using morphological descriptions and molecular analyses to elucidate the distribution, evolutionary history, phylogeny and population structure. The population structure and distribution of stygobitic amphipods is a reflection of the physical structure of groundwater networks, and their evolutionary history can be used to understand the formation of groundwater bodies. S.filaris is a small and common inhabitant of aquifers in the northern regions of the country, while S. calceola occurs in many of the same locations but is much larger and rarer. No morphological differences were observed between individuals of different populations of S. filaris or S. calceola and detailed illustrations have been provided for each. This finding is not believed to be indicative of a high degree of connectivity within the subterranean groundwater network, lending to high rates of gene flow, instead, these morphological similarities are a symptom of cryptic speciation. Sternophysingids are likely to arise from an very ancient and widespread ancestor inhabiting much of Gondwanaland prior to its breakup. Using the COI gene, S. calceola collected from the type locality in Matlapitse Cave was successfully PCR-amplified and sequenced. Phylogenies were constructed using a limited variety of crangonyctoid sequences and the sternophysingids were confirmed to belong to the Crangonyctoidea superfamily, being most closely allied with the Western Australian paramelitids. The relationship between these groups is still distant and ancient; it is expected that the South African paramelitids would be more closely related, as well as other African, Madagascan and Indian crangonyctoids.

Abstract

Governing groundwater in a way that does not deplete the source of water, nor cause any form of degradation is a global challenge. In South Africa, scholarship shows an extensive history of groundwater governance doctrines. Yet, the country’s groundwater remained a poorly governed resource. A recent regulatory regime change culminated in the National Water Act 36 of 1998 (NWA), which was specifically promulgated to ‘provide for fundamental reform of the law relating to water resources’. While the NWA provided an ideal opportunity for the judicious governance of South Africa’s groundwater, groundwater governance remain problematic. The regulatory focus is still very much on surface water. In fact, up to date, no regulations have been made to specifically protect vulnerable aquifers, or aquifers on which communities depend as a source of water supply, or aquifers that supports large scale agriculture. This paper sets out to achieve three objectives: to assess South Africa’s existing regulatory approach to the protection of groundwater; to identify gaps in the regulatory framework; and to explore regulatory opportunities to strengthen groundwater governance. The discussion follows a focussed approach, and hinges on the case of the dolomitic aquifer of Delmas. The Delmas case study is expected to show why policy makers and planners need to be more concerned about groundwater. It will also introduce, explain and propose an established international or foreign legal measure that may be incorporated to strengthen the regulatory status of the Delmas aquifer. The paper concludes with recommendations for strengthening South Africa’s groundwater regulation.

Abstract

When conducting water quality monitoring, questions arise on which water quality guidelines to use and where to apply them. For example, the use of South African Water Quality Guidelines (SAWQG) for Domestic usage compared to the use of the South African National Standards (SANS) for Potable Water Quality when monitoring drinking water quality. The World Heath Organization (WHO) published a set of water quality guidelines for drinking water which can also be used instead of SANS. Using various water quality guidelines to assess water quality can give different outcomes on the state of water quality of a particular site. For example, SANS water quality guidelines are less strict when compared to the SAWQG target values, however, SAWQG are comprised of different sets of standards for different usages. SAWQG distinguish between drinking water, livestock and irrigation, aquatic systems and industrial usage while SANS are only used for potable or bottled water. The International Finance Corporation (IFC) that is part of the World Bank Group published the Environmental, Health, and Safety (EHS) Guidelines for Environmental Wastewater and Ambient Water Quality, guidelines set specifically for wastewater and ambient water quality. Utilizing this poster, I will explain when to use which guidelines with different types of water samples. I will also discuss the stringent water use license limits applied at some sites compared to the national standards of South Africa.

Abstract

With increasing population growth and a subsequently increased demand for food production, the agricultural sector has had to grow and develop continuously despite drought-stricken water resources in recent years. The expansion in this sector requires increasingly efficient water use management and increases in water supplies, which are often met through groundwater utilization. In the past several years the use of groundwater in the Western Cape has increased exponentially and thus has forced the sharing of resources. The question pertains to how an invisible water resource that is difficult to measure and quantify, can be shared. Issues of varying complexities can arise when submitting a water use licence application (WULA), such as historical water use debates, interactions between groundwater and surface water, seasonal stresses on resources, etc. In one case study in De Doorns, a WULA became side-tracked soon after initiation by a neighbour’s complaint that his production borehole was severely affected by the drilling of the applicant’s boreholes. In the second case study in the Hexriver Valley, a WULA was complicated by a gentleman’s agreement stating that no one in the valley is allowed to abstract groundwater from deeper than 6 m. This gentleman’s agreement stems from past disagreements regarding such practices. The final case study was not a WULA but arose out of concerns for dropping weir levels connected to a new borehole. The borehole was equipped with new casing to case off the alluvium; it was suspected to be the cause of the disturbance. The scientific method was used to evaluate the borehole’s impact on the weir. Case studies such as these will become more prevalent as the demand on water resources will increase. Hydrogeologists needs to more informed of the complexities that can and will arise in the future as a result of shared water resources.

Abstract

Clogging of existing boreholes due to natural well ageing is the most common cause of decreasing yield worldwide, also in South Africa. Maintenance plans based on systematic monitoring are required including inspection, service and rehabilitation to lengthen production times and to slow down ageing processes. Therefore a prerequisite of economical well operation is to apply the most efficient measures to secure their production capacity at the lowest possible cost. Rehabilitations by mechanical, hydraulic or impulse methods do often not lead to acceptable yield increases. Acids of all kinds have been applied to remove iron(III) and manganese(III,IV) clogging, although pH values of < 1.0 are required before any significant dissolution takes place. This treatment does not only affect substances in adjacent geology but also well construction materials and technical equipment. Alternatives for acidization were researched and developed at the Technical University of Aachen (RWTH) in 1990’s by Prof. Dr. Treskatis and Dr. Houben. Since then iron(III) and manganese(III,IV) are removed by pH-neutral reductants with 50 times greater dissolving capacity than hydrochloric acid at pH 1.0 in identical molar concentration. The closed-circuit injection technique was proved to be the only method to transfer chemical agents as far as the borehole wall in a study by Dresdner Groundwater Center on behalf of German Gas and Water Association in 2003. Low pressure circulation based on large volume flow is accomplished by means of state-of-the-art gravel washers. The application of pH-neutral dissolvers by closed-circuit injection has proved its effectiveness not only in Germany, but also in Switzerland, Austria, Netherlands, Spain, UK, UAE and Peru. Our case study documents its successful introduction in Finland 2020. Until then stand-by acidization had been the only means of battling well ageing. Research funds enabled rehabilitations in different parts of the country resulting in unexpected high yield increases.

Abstract

Imrie, S.

Groundwater in South Africa has great potential to supplement our country’s water demands. Currently, studies show that less than 10% by volume of the Average Groundwater Exploitation Potential is abstracted on an annual basis. The 2017 drought has aided in creating awareness of the importance of this resource towards building water resilience. If managed correctly, groundwater is commonly viewed as a sustainable source. Oftentimes, the ‘sustainability’ of a groundwater resource is an ‘open-ended’ definition based on the hydrogeologist’s interpretation of aquifer pumping test data alone. This approach often discounts the cumulative impact of environmental factors (including drought and climate change) and other users on groundwater. The use of numerical groundwater models to support and inform the conceptual models provides the mechanism to bridge this gap.

This paper discusses various approaches and examples of where numerical modelling plays a key role in supporting groundwater usage in a sustainable and informed manner. In particular, this includes:

•Inclusion of impact from other anthropogenic activities and groundwater users, with model scenarios that show the potential impact of each on the other, as well as the combined result to groundwater (levels and water quality)

•Consideration of extreme climatic events (e.g. 1 in 100-year drought and/or flood), including the use of uncertainty analysis and consideration of dynamic groundwater management, such as the possible varying of sustainable pumping rates to suit the prevailing conditions

•Identification of groundwater receptors and appropriate assessment of potential impacts to those receptors from groundwater usage, including “target-audience” thinking in the post-processing and reporting of numerical model results, so as to convey clear messages to the interested and effected parties and stakeholders

•Use of multiple methods and technologies to calculate and model surface water / groundwater interaction and recharge, including uncertainty analysis, and intelligent challenging of traditional methods of estimating groundwater recharge

Abstract

Because the quality of groundwater is influenced by the host rock through which it moves, it differs on a site-specific basis, and is often naturally brackish or even potentially harmful to people. In spite of this, many practitioners incorrectly use the SANS 241 Drinking Water Standard as “compliance requirement” to compare groundwater quality against. This standard only applies to water that has been purified to be suitable for potable purposes at a water treatment works in terms of regulations made under the Water Services Act 108 of 1997. The only circumstance in which it could be used to compare the quality of natural groundwaters against, is where such groundwater is (to be) used, for potable purposes (with or without treatment), and then only to provide guidance on the level of treatment required to facilitate suitability for such domestic use, and not to determine possible ‘unacceptable’ levels of contamination. Therefore, the comparison of groundwater quality results against the SANS 241 Drinking Water Standard is not only a scientifically flawed practice, it has no basis in law. It is furthermore a scientifically flawed practice to refer to groundwater quality as ‘good’, ‘bad’, or ‘poor’, as it reflects a judgemental anthropocentric perspective that has no place in modern discussions on judicious environmental management and monitoring.

 This then raises the question, what are, or should the limit values be against which groundwater quality results should be compared to determine if it has been negatively affected by anthropogenic activity to such an extent that a scientifically substantiated claim can be made that the groundwater has been ‘polluted’, an allegation with criminal liability implications?

This paper aims to answer this question in the context of South African Framework law and policy, and propose a methodology to determine appropriate site-specific limit values for groundwater quality.

Abstract

The argument in this paper is that improved understanding of science-policy integration, where physical bases of natural science is combined with practice in managing water resource challenges, becomes critical in translating scientific knowledge into effective and sustainability solutions linked to groundwater resource protection. Such hypothesis should be attested at locally relevant scale where water resources reside and where water utilization takes place. This paper provides a practical case-study of how science-policy integration can directly impacts groundwater resource protection practice from a local, and national perspective using strategies of groundwater resources directed measures.

A combination of literature surveys, and desktop record review methods were used for the purpose of data collection from published literature and publicly accessible national databases of the Department of Water and Sanitation (DWS). Collected data were analysed using document analysis, descriptive statistics, and case study analysis methods. Based on the analysis, three types of science-policy nexus theoretical models exist in practice, namely, 1) science-policy integration, 2) policy-science integration, and 3) mixed integration. From a national perspective, the analysis showed that South Africa is able to practically apply science-policy nexus in policy implementation practice for water resources protection, and that such practice depicts a mixed integration model of the nexus. Case study analysis of the Schoonspruit-Koekemoerspruit River Catchment provided insight on how localized operationalization of groundwater resource directed measures facilitates sustained groundwater resources protection for water availability and sustainable utilization. This study provides an exemplary for collaborations between researchers and/or scientists and policy makers to ensure that science research is answering policy-relevant questions and that results from scientific work are readily available for policy implementation. In addition, there is adequate evidence to indicate that science-policy nexus can be designed and prioritized to support sustainable development agenda on groundwater resilience, and visibility at various levels.

Abstract

The proximity of aquifer systems to sources of contamination exposes them to severe environmental threats. Pollutants that leak from petrol stations, industrial areas and landfills eventually seep through the vadose zone to reach shallow groundwater, leading to groundwater contamination. One of these pollutants is Methyl Tertiary-Butyl Ether (MTBE), which is a polar organic compound that is volatile at room temperature. As a result of its high solubility compared to other gasoline additives, MTBE can cause serious environmental issues. The aims of this study were to characterize the extent of MTBE in groundwater and characterize natural attenuation in a Saudi Arabian MTBE and methanol manufacturing company.

The aims were achieved by analyzing monthly MTBE concentrations (to observe the seasonal changes of MTBE) and annual MTBE concentrations (to observe long-term changes) in 5 out of 18. Groundwater samples were collected, and in each year the MTBE, Total organic carbon (TOC) and Electrical conductivity (EC) concentrations were recorded. Because of inconsistency in the data, the results for the monthly data were from 2007 to 2010, and from 2007 to 2012 for the annual data. The results indicated a positive relationship between MTBE and TOC, and as a result TOC can be used to monitor and indicate the presence of MTBE. There was plume growth in 2 of the 5 wells (well 4 and well 14) with well 4 recording the highest MTBE concentration in all years. The reason for the high concentration might be because of spillages during truck loading. The other 3 wells showed signs of natural attenuation. Results from seasonal data suggested that temperature influences MTBE concentrations and therefore the rate of natural attenuation. There are many methods to remediate MTBE and each of them is site specific, but bioremediation was recommended for this site due to its cost-effectiveness.

Abstract

This paper describes the calibration and testing processes of three methods of measuring hydraulic conductivity (slug test, mini disk infiltrometer and particle size distribution (sieves)) across varying scales (field and lab). The methods used in the field are the slug test and sieves which were used in four different wells of the Rietvlei wetland in Cape town and the mini disk infiltrometer was used in a grid developed in one of the Nelson Mandela University Reserve salt pans. The mini disk infiltrometer and the slug test are used to determine the saturated hydraulic conductivity (Ks) of altered or unaltered soil samples under controlled conditions in a laboratory, and that is a key parameter to understand the movement of water through a porous medium. The mini disk infiltrometer requires a small volume of water and has a compact size which makes it convenient for laboratory soil specimens, especially when studying vertical infiltration. Infiltration shows a dependence on the compaction and saturation of soil while hydraulic conductivity increases with depth in a simulated aquifer.

Abstract

Kürstein, J;  Thorn, P; Vermaak, N; Kotzé, YL; Pedersen, PG; Linneberg, MS; Fourie, F; Magingi, A

Water supply relies entirely on groundwater in Denmark. A national groundwater mapping programme was established in 2000 to protect this valuable resource. It builds on a thorough and holistic understanding of the hydrogeological settings, obtained through an extensive data collection, culminating with an identification of threats and aquifer vulnerablility. As part of the programme, new approaches, methods, and instruments have been developed, such as airborne geophysical survey by Sky-TEM that allows the mapping of large areas in a fine resolution. Another key element in the mapping is the development of three-dimensional hydrogeological and numerical models. These are used to understand the groundwater flow paths and delineate wellhead capture zones as well as infiltration areas, which, depending on the assessed vulnerability, may be subject to protective measures.

The Danish mapping approach have been tested at selected South African sites through the Strategic Sector Cooperation (SSC) between Denmark and South Africa. The approach was applied in a study supporting Umgeni Water to identify groundwater resources to supply numerous villages near the town of Ladysmith. The study illustrated a high potential for adapting relevant parts of the Danish approach to South Africa, but also revealed some challenges, e.g. related to the fractured geology, where groundwater recharge can be concentrated along dykes, a process very different from what is generally observed in Denmark.

The SSC has initialised the project “South African Groundwater Mapping and Assessment Approach (SAGMAA)” to share knowledge gain through the national groundwater mapping programme in Denmark with South Africa and explore the possibility of adapting elements from the Danish approach to South African conditions in a broader context. The objective of the project is to provide recommendations to South African guidelines, and the paper will present results from the comparison of approaches in the two countries and preliminary recommendations to guidelines.

Abstract

The Smuts House in Centurion is under threat of subsidence due to sinkholes. These sinkholes are linked to the Malmani Dolomite Formation, a Proterozoic carbonate sequence within the Chuniespoort Group of the Transvaal Supergroup, and is subject to sinkhole development (Clay, 1981). In addition to Smuts House, the areas are populated by thousands of people meaning risk of financial damage and, in some cases, loss of property and lives (Trollip, 2006).

The Jan Smuts House Museum is located in a natural park of indigenous trees and shrubs. The area is generally flat-lying; however, various ridges bisect the site in a north-south trend. A koppie (Cornwall Hill) is situated in the north. Outcrops of dolomite and chert characterise most of the study area. The two major streams in the area are that of the Sesmylspruit and Olifantspruit.

This study was undertaken to examine the relationship between subsidence of the Smuts House Museum, subsurface features (geological and anthropogenic) and the local geology. Magnetic and resistivity, active seismic and ground-penetrating radar (GPR) geophysical data were collected, along with x-ray fluorescence (XRF) geochemical data and hydrogeological data.

Abstract

Pietersen, KC; Musekiwa, C; Chevallier, L

Groundwater plays an integral role in the fresh water supply for both rural and urban populations of the Southern African Development Community (SADC). However, the sustainable use of groundwater is negatively impacted by persistent and recurring droughts in the region. Understanding the characteristics of drought and the risk to groundwater, will contribute towards better planning and management of water supply in the region. In this study, a novel approach is demonstrated, that uses data from the Gravity Recovery and Climate Experiment (GRACE) to map and characterise the risk to groundwater storage from drought, across the SADC region. In addition, this study also demonstrates and evaluates the inclusion of this new feature, groundwater storage sensitivity, as an additional input into a revised Groundwater Drought Risk Mapping and Management System (GRiMMS), in-order to update the SADC groundwater drought risk map developed in 2013. Specifically, the GRACE Groundwater Drought Index is calculated and used to characterise the total length, average intensity and trend, in groundwater storage drought conditions. These three factors are then combined into a new layer, groundwater storage sensitivity, and validated through comparison with groundwater level data. The groundwater storage sensitivity, which represents the risk to groundwater drought associated with groundwater storage deviations, is then included at the modular level in the GRiMMS algorithm. The inclusion of the GRACE derived groundwater storage sensitivity further highlights regions of known hydrological drought, emphasising the impact groundwater storage plays in mitigating drought risk. In conclusion, GRACE provides a unique tool that can be used to map the impact of drought across the SADC region.

Abstract

Managed aquifer recharge (MAR), the purposeful recharge of water to aquifers for subsequent recovery, is used globally to replenish over-exploited groundwater resources and to prevent saltwater intrusion. Due to increased water shortage worldwide, there is a growing interest in using unconventional water resources for MAR such as reclaimed water or surface water impaired by wastewater discharges. This, however, raises major concerns related to pollution of our drinking water resources. MARSA is a new Danish-South African research project aiming at developing MAR technologies allowing a broader span of water resources to be used for MAR, including storm water, river water, saline water, and even treated wastewater. It is hypothesised that improved removal of organic pollutants, nitrogen species, antibiotic resistance, and pathogens can be achieved by establishment of reactive barriers or creation of different redox environments through injection of oxidizing agents to anaerobic aquifers during recharge. In MARSA we will carry out feasibility studies, as flow-through columns, first in Denmark and later in South Africa, to investigate the capacity of South African aquifer sediments to remove organic pollutants, nitrogen species, antibiotic resistance genes, and pathogens. Then, based on these studies, MAR options will be further investigated at field conditions in South Africa using real source water from MAR sites. For this presentation we will give an overview of the MARSA-project and show results from previous feasibility studies investigating the potential of reactive barriers to remove organic micropollutants and ammonium. These studies have shown that establishment of reactive barriers will cause oxygen depletion, but also more efficient ammonium and organic micro-pollutant removal. MARSA is funded by the DANIDA fellowship centre, Ministry of Foreign Affairs of Denmark. Project no. 20-M03GEUS.

Abstract

The main purpose of this paper is to present a case study where soil moisture and rainfall data were evaluated for engineered tree plantations, to understand the potential impact on vertical groundwater recharge. Soil moisture for probes within the tree plantation root zones and reference sites within the same soil types were evaluated, in context to site rainfall patterns. Water transfer from shallow to deeper soil zones for a dataset of 2 years are presented. Observations in terms of water movement in the root zone are made. A water balance is presented in the effort to conceptualise the impact on water transfer through the upper vadose zone and to quantify the significance in terms of potential vertical groundwater recharge reduction.

Abstract

The study area is located in a Swiss alpine valley at the border between Switzerland and France and is situated in Valais. It is delimited by the hydrologic catchment of the river “La Vièze de Morgins”. The catchment area is situated in the Municipality of Troistorrents and of Monthey. Its population is approximately 4500 inhabitants. From the geological point of view, the valley “Val de Morgins” is mostly comprised of sedimentary rocks, amongst others breccia, schist, flysch, limestone, and quaternary sediments. The valley is affected by several natural hazards, such as landslides, rockfalls, and avalanches. Hydrogeologically, the valley contains few main springs that are outlets of porous and fissured aquifers. For this study, an inventory and monitoring of springs and rivers has been carried out since 2018 until April 2021. Particularly, more than 110 springs and rivers have been registered and observed during this time. The data includes GPS coordinates, photos, measurements of physical-chemical parameters and flowrates. Complementary to measurements, specific geological and topographical maps, and site information have been gathered. The analysis and interpretation of this huge set of hydrogeological data will be concluded with a new and innovative approach using different data science libraries that are implemented for the Python programming language. In this case study, groundwater sampling training is used to increase the understanding of the water quality. Four years of field measurements enable a better understanding of the parameter variability in relation to seasonality. Furthermore, new data analysis can aid the integrated resource management for the municipal water supply. The sampling and monitoring are key aspects to ensure water security, in terms of quality and volume. Additionally, it can also unlock prospective groundwater resources for municipal water supply. Case study data will also be compared with South African and other Swiss dataset of similar aquifer type.

Abstract

More often these days we hear concerns from water users regarding “how much water is the newly drilled borehole of a neighbor extracting from “their” river water”. These are serious question with serious repercussions for sustainable use and economic development. No one wants to lose what they have invested in. On the other hand, from a groundwater perspective, this is very one sided.

Numerical modelling solutions are often proposed to clients as a more accurate method of determining the groundwater surface water interaction, with the addition of volumes removed from the modelling domain, to present to decision makers the changes in volumes of discharge into streams or volumes of infiltration of stream water into the aquifer. However, this is an expensive and time-consuming exercise, and will most likely incur additional costs to accumulate sufficient meaningful data sets for input into these detailed models. A robust combination of analytical and numerical solutions is proposed, while keeping aquifer assumptions conservative, where a lack of regional data exist. This is useful in quantifying this interaction and associated volumes better without the full time and cost associated with calibrated regional flow and transport models. Analytical calculations assist in the quantification of the aquifer’s hydraulic and physical properties and is used to conceptualize flow better and determine the inputs for a conservative well field scale numerical model, in which the change in flow between groundwater and surface water system are also evaluated. The well field scale model is calibrated in a fraction of the time as a conventional flow model (less than 20%), while volumes derived is defendable and based on measurable data. This combination is viewed to be a critical step in providing time effective solutions

Abstract

This study investigates and elaborates the development and testing of a multilevel sampling device. The primary purpose of this device is to achieve multilevel sampling in a well simultaneously, producing samples that are representative of the in situ groundwater. The device has been designed to have four different depths from which extraction of groundwater samples can be performed. Testing of the device involves a two-part process. A laboratory based testing and field based testing. The laboratory testing was done in a simulated well where three water tests were performed; normal tap water, salt water and hot boiling water. The field based testing was done on existing boreholes in the Rietvlei Wetland Reserve in the Western Cape. In the two processes involved, hydrochemical parameters were used to test for the efficiency of the device in terms of its working performance and to furthermore analyse the water chemistry which enables us to determine the water quality.

Abstract

McGibbon, D; Riemann, K

The Cape Flats Aquifer Management Scheme (CFAMS) includes both abstraction of groundwater and managed aquifer recharge (MAR) as part of the City of Cape Towns (CoCT) New Water Programme to diversify their bulk water supply and build resilience against future droughts. Since the project was initiated in early 2018, over 250 boreholes have been drilled for exploration, monitoring, abstraction, and MAR. Rotary mud drilling was used for most of the drilling due to its suitability in unconsolidated geological material, typical of the CFA. As effective as rotary mud drilling is for large scale development, it lacks in accuracy for detailed geological interpretation used for borehole siting and design (gravel pack and screen aperture size and screen position). This is due to the mixing of material and the circulation of the drilling mud washing away fine sediment which can skew grain size analysis results and obscure the vertical position and thickness of thin confining clay or organic rich lenses. The clay and organic rich layers can cause surface flooding during injection as they act as confining layers which effects borehole design and more importantly siting of MAR boreholes. To overcome this, two additional drilling techniques were explored, sonic and air core. Air core was disregarded early on due to the air creating a cavity in the underlying unconsolidated sediments. Sonic drilling, however, was successful in retrieving a continuous undisturbed core log through high resonant energy that liquefies the sediments, which are then brought to surface in a core barrel. The undisturbed continuous nature of the log allows for accurate grain size analysis and detailed vertical geological logging which can be used for facies analysis to interpret the paleoenvironment and predict the lateral extent of clay or organic rich layers that influence borehole siting, design, and the hydrochemistry.

Abstract

It has become increasingly apparent that understanding fractured rock mechanics as well as the interactions and exchanges between groundwater and surface water systems are crucial considering the increase in demand of each in recent years. Especially in a time where long term sustainability is of great importance for many water management agencies, groundwater professionals and the average water users. Previous callow experience has shown that there is a misunderstanding in the correct interpretation and analyses of pumping test data. The fracture characterisation (FC) method software provides a most useful tool in the overall understanding of a fractured rock aquifer, quantification of the aquifer’s hydraulic (flow regime and flow boundary conditions) and physical properties, only if the time-drawdown relationships are correctly interpreted and when the theoretical application principles are applied. Interpretation is not simply a copy and paste of the aquifer test data into the software to get a quick answer (especially when project time constraints are considered), however, recent experiences with numerous field examples, required intricate understanding of the geological environment, intended use and abstraction schedules coupled with the academic applications on which the software was based for correct interpretation.

Through the application of correct interpretation principles, a plethora of flow information becomes available, of which examples will be provided in the presentation itself. By achieving this, flow can be conceptualised for inputs into a conservative scale three-dimensional numerical flow model and calibrated based on measurable data in a fraction of the time of a conventional regional model. Although higher confidence levels are achieved with these practical solutions, monitoring programmes are still required to provide better insight of the aquifer responses to long-term abstraction and recovery.

Abstract

Ewart Smith, J; Snaddon, K; de Beer, J; Murray, K; Harillal, Z; Frenzel, P; Lasher-Scheepers, C

Various analysis techniques are available for assessing the groundwater dependence of ecosystems. Hydrogeological monitoring within the Kogelberg and greater Table Mountain Group (TMG) aquifer has provided various datasets from multiple scientific disciplines (hydrological, hydrogeological, geochemical, climatic, ecological and botanical). Using a variety of analysis techniques, and using the Kogelberg as a case study, this paper assesses the groundwater dependence of several ecological sites (wetlands and streams). The starting point is a sound geological and hydrogeological conceptualisation of the site. The approach involves conceptualisation and analysis within each scientific discipline, but also requires bridging between areas of specialisation and analysis of a variety of datasets. This paper presents the data and analyses undertaken and the relevant results as they pertain to several sites within the Kogelberg.

Abstract

The Rietvlei Wetland, located in the Western Cape of South Africa is well recognised for harbouring numerous bird species, and is ranked the 6th most important coastal wetland in the South-western Cape. Researchers perceive that the wetland could be threatened by the growing drought hazards, and increased water demand in Cape Town. The extent of the effects is however unquantified and unknown. This therefore calls for extensive research and novel approaches to understand and quantify wetland hydrodynamics, to shape wetland management frameworks. Conducting thorough field work to understand wetland processes, and the use of numerical models for future prediction of black swan events are well recommended. Thus, the study aims to develop a conceptual hydrogeological model for Rietvlei Wetland, and to develop a numerical model to quantify the wetland’s groundwater budget. To achieve this, historical data was gathered, and field work which included groundwater monitoring, collection of sediment profiles and water quality analysis was undertaken. Preliminary results show that the wetland is underlain by an unconsolidated aquifer, largely overlain by different types of sand, mixed with clay and silt, and precipitation is the main source of groundwater into the wetland. A distinct relationship is seen between elevation, soil type and soil structure, such that during the peak rainy season, groundwater tends to be above the ground surface in the low-lying salt pans, dominated by clayey layers on their surfaces. These surfaces tend to crack during the dry season, facilitating preferential flow pathways at onset of rain. This information, and other historical data will be used to develop a numerical model using MODFLOW-NWT and ModelMuse. The numerical model is perceived to be the basis of groundwater modeling using open-source software for Rietvlei Wetland, and may be used for predicting the impacts of drought and increased groundwater abstraction on the wetland’s hydrodynamics.

Abstract

The impact of the future closure of the KROPZ phosphate mine in the West Coast on the various potential receptors including the underlying Elandsfontein Aquifer System (EAS), Langebaan Lagoon (RAMSAR-site) and wetlands were assessed. This abstract/paper describes the geochemical characterization and management options related to the waste streams from the mining activity, to assess the post closure contribution to groundwater flow from the mine towards potential receptors. The PHREEQC geochemical modelling code was used to predict potential mine water impacts. The input water quality parameters used in the model included: background groundwater quality, pit water and processed water generated from phosphate separation process at the mine. Various scenarios were simulated combining the different process water streams with the tailings and soft stockpile material at the mine. The geochemical predictions showed some management options that should be prevented, while also providing guidance to promising options where most of the chemical parameters does not exceed the WUL stage 1 thresholds. There is however, an increase in sulphate concentrations that need attending to before the mine goes into production phase. Currently there seems to be no immediate concern on the Lagoon relating to the prediction of mine water impacts post mine closure. Some of the management scenarios do however show low levels of potential impacts on SANParks property 100 years post closure. These predictions do however correlate to areas where limited calibration data is available. At the time of this abstract the sites for new boreholes have been selected and the initial boreholes are being drilled to confirm aquifer properties in areas with limited data.

Abstract

Pope Gregory defined the seven deadly sins in order to guide the Catholic Church in the 6th century. The past 20 odd years in the industry has shown that there are several mistakes that are repeatedly made by numerical modelers. Although we all acknowledge that any numerical model is a non-unique solution, and that there exists and infinite number of solutions, there are several sins that will prevent the model from giving an accurate representation. This paper will provide the most common mistakes made in a format that is accessible to numerical modelers as well as other practitioners. Issues covered will include boundary conditions, model complexity and recharge.

Abstract

The West Coast in the Western Cape of South Africa is a water-scarce area. With pressure from population and industrial growth, recurring droughts and climate change, there is increasing urgency in the West Coast to protect groundwater resources. Saldanha Bay is dependent on groundwater as part of its bulk water supply system. Where the natural groundwater recharge is no longer sufficient to meet the growing groundwater needs, practices such as Managed Aquifer Recharge (MAR) can be used to ensure the sustainability of these groundwater resources.

This study aims to identify areas within the Saldanha Bay Local Municipality suitable for Managed Aquifer Recharge to maximize the water available during periods of limited surface water supply. As such, the MAR study site identification requires a comprehensive geohydrological assessment of the Saldanha Bay aquifer. This includes an understanding of the quality and quantity of the source water available for recharge, the aquifer structure and hydraulic properties, the space available to store water, and the compatibility of the recharged water with the groundwater.

MAR research methods included Time Domain Electromagnetic (TDEM) airborne geophysical surveys, infiltration tests, pumping tests and hydrochemical analysis. TDEM surveys provided clarity on the various aquifer geological properties. Infiltration and pumping tests shed light on the horizontal and vertical hydraulic properties of the aquifer. PhreeqC modelling outputs helped predict the outcome of the mixing between groundwater and potential MAR water resources.

Geological features were delineated through TDEM surveys and inferred five suitable MAR sites where clay layers were missing. Infiltration and pumping tests showed that Langebaan Road is better suited to borehole injection, whereas Hopefield has the benefit of infiltration MAR techniques as an additional option. PhreeqC outputs exhibit that both pipeline and Berg River water show promising results as potential source water resources for MAR as compared to other resources.

Abstract

Modern societies rely heavily on subsurface resources and need open access to accurate and standardized scientific digital data that describe the subsurface’s infrastructure and geology, including the distribution of local and regional aquifers up to a depth of five kilometres. These data are essential for assessing and reducing climate change’s impact and enabling the green transition. Digital maps, 3D and 4D models of the subsurface are necessary to investigate and address issues such as groundwater quality and quantity, flood and drought impacts, renewable geo-energy solutions, availability of critical raw materials, resilient city planning, carbon capture and storage, disaster risk assessment and adaptation, and protection of groundwater-dependent terrestrial and associated aquatic ecosystems and biodiversity. For over a decade, EuroGeoSurveys, the Geological Surveys of Europe, has been working on providing harmonized digital European subsurface data through the European Geological Data Infrastructure, EGDI.

These data are invaluable for informed decision-making and policy implementation regarding the green transition, Sustainable Development Goals, and future Digital Twins in earth sciences. The database is continuously developed and improved in collaboration with relevant stakeholders to meet societal needs and facilitate sustainable, secure, and integrated management of sometimes competing uses of surface and subsurface resources.

Abstract

Understanding and quantifying hydrology processes represent a mandatory step in semi-arid/arid regions for defining the vulnerability of these environments to climate change and human pressure and providing useful data to steer mitigation and resilience strategies. This generally valid concept becomes even more stringent for highly sensitive ecosystems, such as small islands like Pianosa. The project intends to deploy a multi-disciplinary approach for better understanding and quantifying the hydrological processes affecting water availability and their evolution, possibly suggesting best practices for water sustainability.

First results pointed out as over the last decade the precipitation regime has led to a major rate of evapotranspiration and minor effective infiltration that caused a decreasing of piezometric level over several years. Quantity and chemical-isotopic features of rainfall and effective infiltration water measured/collected by a raingauge and a high precision lysimeter describe the hydrological processes at soil level and characterize the rate and seasonality of groundwater recharge. Hydrogeological and geochemical data of groundwater are highlighting the distribution and relationship among different groundwater components, including the seawater intrusion. Furthermore, the comparative analyses of continuative data monitoring in wells and weather station showed the presence of possible concentrated water infiltration processes during rainfall extreme events that induce a quick response of shallow groundwater system in terms of water level rise and decrease of electrical conductivity. Thus, elements of vulnerability of the aquifer to pollution are pointed out, as well as the possibility to provide technical solutions for enhancing water infiltration and groundwater availability.

Abstract

Groundwater is the most important source of potable water in rural areas of Acholiland, a sub-region of northern Uganda. Installation of handpumps has been the focus of local government and international aid to provide safe drinking water in Uganda. However, non-functional handpumps are one reason for the abandonment of groundwater resources. For handpumps to be sustainable for years, appropriate siting and construction is required, as well as monitoring. This is common knowledge to specialists working in rural supply, but gaps in knowledge transfer and field skills may exist for the persons installing and maintaining handpump wells. This is a case study of a ten-day field campaign designed to train local participants who actively work in the rural groundwater supply sector. Nine non-functional handpump sites were identified for repair and hydrogeology and geophysical studies. A non-governmental organization, IsraAID, along with Gulu University implemented training by hydrogeology specialists to build local capacity. The training included handpump functionality tests, downhole inspections, electrical resistivity tomography surveys, and water quality sampling, including a novel Escherichia coli test that did not require an incubator. Functionality tests and downhole inspections provided simple but effective ways to assess handpump and well issues. Training in water quality empowered the participants to complete rapid assessments of the quality of the water and start monitoring programs. The success of the project was based on collaboration with multiple organizations focusing on the development of local capacity. The lessons learnt from this campaign should be considered for other rural groundwater supply scenarios.

Abstract

Global warming affects atmospheric and oceanic energy budgets, modifying the Earth’s water cycle with consequent changes to precipitation patterns. The effects on groundwater discharge are still uncertain at a global and local scale. The most critical step to assess future spring flow scenarios is quantifying the recharge-discharge connection. This research aims to predict the long-term effects of climate change on the discharge of seven main springs with long hydrologic series of discharge values located in different hydrogeological settings along the Apenninic chain (Italy). The investigated springs are strategic for either public water supply or mineral water bottling. The Apennines stretch along the Italian peninsula in a Northwest-Southeast direction, crossing the Mediterranean area that represents a critical zone for climate change due to a decreased recharge and increased frequency and severity of droughts over the last two to three decades. In this communication, the data of one of the chosen springs, called Ermicciolo (42°55’25.8”N, 11°38’29.5”E; 1020 m ASL), discharging out from the volcanic aquifer of Mount Amiata, are presented. Statistical and numerical tools have been applied to analyse the time series of recharge-related parameters in the spring’s contribution area and the spring discharge from 1939 to 2022. To estimate the impact of climate change on the Ermicciolo’s outflow, a regional atmospheric circulation model has been downscaled to the spring catchment area and used to derive the expected discharge at the 2040-2060 time span, according to the build-up data-driven model of the recharge-discharge relationship in the past.

Abstract

The interaction between groundwater and wetlands is poorly understood, even though it has been the topic of many research projects, like the study done at the Langebaan Lagoon. This interaction is complex as it lies at the intersection between groundwater and surface water, but each situation is unique, with different conditions regulating the interaction. Wetlands can be the source of water that recharges groundwater systems on the one hand, while the other is dependent on the groundwater systems. This interaction became part of the project looking at how to implement Managed Aquifer Recharge for Saldanha Bay Local Municipality without having a negative impact on the groundwater-dependent ecosystems, such as the springs and wetlands in the area. Ten wetlands were identified on the Langebaan Road Aquifer Unit, and a monitoring programme was developed. The purpose of the monitoring was to determine the status of the wetlands as a baseline before the implementation of managed aquifer recharge and to determine the level of groundwater dependence. The latter was done by hydrochemical analysis of rainwater, groundwater and water from the wetlands and stable isotope analysis. The ability of the wetlands to act as a recharge point to the groundwater system will be investigated through column experiments and lithostratigraphic analysis of soil columns taken at the wetlands. Groundwater levels will also be plotted as contour lines to determine the intersection of the water table with the wetlands in the area.

Abstract

Being extensively available and of high quality, groundwater is the primary source of freshwater in coastal regions globally. However, due to anthropogenic and natural drivers, groundwater salinisation is a growing threat to this resource’s long- and short-term viability. The causes and timescales of aquifer salinisation are complex and difficult to quantify, information essential for suitably timed mitigation strategies. One way to inform these strategies and develop storylines of future freshwater (un)availability is through 3D groundwater salinity modelling. These models can predict current groundwater distributions and quantitatively assess the impacts of a projected increase in groundwater extraction rates and sea-level rise. Until recently, detailed 3D models on this scale have been largely unattainable due to computational burdens and a shortage of in-situ data. Fortunately, recent developments in code parallelization, reproducible modelling techniques, and access to high-performance computing (e.g., via parallel SEAWAT) have made this feasible. Machine learning and data mining developments have also allowed an unprecedented opportunity to constrain and calibrate those models. With this in mind, we present our progress towards global 3D salinity modelling by showcasing a regional-scale model in the Mediterranean Sea area. This test case uses newly developed, automated geological and salinity interpolation methods to create initial conditions while implemented in a parallelized version of SEAWAT. The modelling outcomes highlight the potential of supra-regional scale modelling in the context of global (planetary) processes and localised anthropogenic effects.

Abstract

This paper presents the results of groundwater flow modelling studies that were conducted within the scope of the PRIMA RESERVOIR project. The project’s main goal is to develop an innovative methodology to mitigate land subsidence due to excessive groundwater exploitation in water-stressed Mediterranean watersheds. This objective is achieved by integrating earth-observation-derived land subsidence rates with a coupled implementation of numerical groundwater flow and geomechanical modelling. MODFLOWbased 3-D transient flow models were constructed for the four pilot sites (the coastland of Comacchio in Italy, the Alto Guadalentín aquifer in Spain, the Gediz River basin alluvial aquifer in Turkiye and the Azraq basin in Jordan) that have different hydrogeological properties and pose different challenges concerning water management. Models were calibrated and run for similar simulation periods (2013-2021) to obtain hydraulic head drawdowns and changes in groundwater storage. Land subsidence at these sites was evaluated using Advanced Differential Radar Interferometry (A-DInSAR) on image stacks from the Sentinel-1 satellite. Subsidence rates were then compared to hydraulic head drawdown rates to identify groundwater pumping-induced subsidence areas. The comparison for all study areas suggested that locations of maximum displacements do not necessarily coincide with areas that display the largest head drawdown calculated by the flow models. Other triggering factors, such as the thickness of compressible materials, are also related to high subsidence areas.

Abstract

Water resources worldwide are stressed, and the number of groundwater professionals required to manage those resources is not being generated in sufficient numbers. Groundwater educational resources must be placed in schools to generate excitement and raise awareness. Additionally, people entering the workforce need training throughout their professional careers. Oklahoma State University partnered with the U.S. National Ground Water Association to develop a framework for providing education and training programs in groundwater that allow for interactive online education at all levels. The Awesome Aquifer 360 program targets grades 5-8, allowing students to conceptually explore aquifers and the people who manage them. The Drilling Basics Online program provides a 40-hour basic safety and drilling training to recruit professionals into the groundwater industry and reinforce safe operations. These programs and future plans for the technique will be discussed.

Abstract

Streamwater and groundwater are changing in the Arctic region because of significant climate warming. Arctic amplification has intensified the melting of snow cover, glaciers and permafrost, leading to a prominent variation in the annual discharge of rivers, the groundwater occurrence, and their relationships. In high-latitude regions, evaluating groundwater flux/storage and river discharge is challenging due to a lack of hydrogeological data. Changes in river flows and groundwater discharge will alter freshwater and terrigenous material flux, with implications for freshwater and marine ecosystems. Consequently, a more timely and accurate evaluation of surface and groundwater is required. In this framework, through the ICEtoFLUX project (MUR/PRA2021/project-0027), hydrology, geophysics and geochemical-isotopic surveys have been started during 2022 in the Bayelva River catchment (W-Svalbard) from its glaciers and periglacial/proglacial systems up to the Kongsfjorden. The study aims to quantify hydrologic processes and related transport of matter (solid transport, chemical solutes flux) and investigate how subsurface and surface waters interact during active layer development. The first results suggest that electrical conductivity and total suspended solids increase from glaciers to the Bayelva monitoring station, about 1 km from the coast. Seasonal evolution of physical-chemical features was also observed. Results from geophysics data and piezometers indicate that the underground flow is spatially and temporally heterogeneous, both quantitatively and from a physicochemical-isotopic point of view. Springwater characteristics testify to a deep and well-organized groundwater flow path system. This study highlights the high complexity of these systems and their high sensitivity to the meteo-climatic regimes.

Abstract

The City of Windhoek in Namibia has developed wellfields and a managed aquifer recharge scheme within the fractured Windhoek Aquifer to ensure a sustainable potable water supply to the city during drought. A three-dimensional numerical groundwater model of the aquifer was developed using the finite-difference code MODFLOW to determine the potential impacts of varying pump inlet depth elevations and varying production borehole abstraction rates for optimal wellfield and aquifer management. The initial steady-state numerical model was calibrated to September 2011 groundwater levels, representing the best approximation of “aquifer full” conditions (following a good rainfall period and best available data). The subsequent transient numerical model was calibrated against groundwater level fluctuations from September 2011 to August 2019, the period after steady-state calibration for which data was available (and during which monitored groundwater abstraction occurred). The calibrated transient model was used to run various predictive scenarios related to increased emergency groundwater abstraction and estimate potential impacts on the Windhoek Aquifer. These predictive scenarios assessed groundwater level drawdown and recovery, aquifer storage potential, and potential abstraction rates under different pump elevations. Model results indicated a sharp initial groundwater level drop followed by a gradual decrease as groundwater levels approached the 100 m saturated depth mark. Pumping elevations were subsequently updated with recommended abstraction rates and volumes for the entire Windhoek Aquifer. The numerical groundwater model, in association with extensive groundwater monitoring, will be used to assess/manage the long-term sustainable and optimal utilisation of the Windhoek Aquifer.

Abstract

The City of Cape Town (CCT) initiated its “New Water Programme” in 2017 (during the major 2015-2018 “Day Zero” drought) to diversify its bulk water supply, thereby improving longterm water security and resilience against future droughts. This includes bulk groundwater abstraction from the major fractured Peninsula and Nardouw Aquifers of the Table Mountain Group (TMG) in the mountain catchments east of the CCT. The TMG aquifers are essential in sustaining groundwater-dependent ecosystems associated with the Cape Floral Kingdom – a global biodiversity (but also extinction) hotspot with exceptional endemic diversity. A strong geoethical, “no-regrets” approach is therefore required to develop TMG wellfield schemes for the CCT (and other towns/cities in the Western/Eastern Cape) to reduce the risk of any negative ecological and environmental impacts while still enhancing the drought resilience of the city, providing water for future urban growth, and meeting Sustainable Development Goals 6 and 11.

To this extent, the CCT has developed an extensive regional (and local, in terms of Steenbras Wellfield) environmental monitoring network, incorporating a range of in-situ and remote sensing-based measurements across the Earth’s “Critical Zone” – this includes current groundwater, surface water, ecological, soil and meteorological monitoring stations, and future seismo-geodetic monitoring. An ongoing ambition is to include this CCT TMG monitoring network into the “Greater Cape Town Landscape”, which is currently in development as one of six national South African landscapes under the “Expanded Freshwater and Terrestrial Environmental Observation Network” (EFTEON) platform being hosted by the South African Environmental Observation Network.

Abstract

The results of a full field application of a DNA-based nano tracer in an arenitic aquifer are presented along with the comparison with the breakthrough of a classical tracer injected in parallel. DNA is encapsulated into amorphous silica spheres (nanoparticles), protecting the molecule from chemical and physical stresses. The main advantages of using DNA with classical tracers, like ionic or fluorescent, are the lower detection concentration and the chance to perform multi-tracer tests with many distinct signatures of injection. To the authors’ best knowledge, this is the first tracing adopting nano-particles on full field conditions in a sedimentary fractured aquifer. Preliminary tests in the lab were performed adopting either deionized water or groundwater collected at the experimental site: a set of nanoparticles at a known concentration was dissolved by adding a buffered fluoride solution, and DNA was then quantified by qPCR reaction (SYBR green). The hydrogeological setting is represented by a Miocenic marine arenitic aquifer (Pantano formation) outcropping extensively in Northern Apennines (Italy) and the main groundwater reservoir for public water supply through the uptake of many perennial springs. The main purpose of the tracing was to verify the transmissive capacity of fractures with high aperture (15-20 cm) identified by optical and acoustic televiewers inside an 80 m deep borehole. The injection was performed inside the borehole, and the tracer’s recovery was between 5-15 m, both in the uptake points of two perennial springs and in another borehole drilled nearby.

Abstract

Case studies illustrate a conceptual framework for shallow groundwater flow systems’ temporal and spatial variability with groundwater-surface water interactions in the Boreal Plains of Canada. The framework was developed using a twenty-year hydrometric dataset (e.g., climatological and streamflow data, hydraulic heads, vertical hydraulic head gradients, geochemical and isotopic signatures). The region is characterized by low-relief glacial landscapes, with a mosaic of forestlands and peatlands, and a subhumid climate, resulting in spatially heterogeneous storage and transmission properties, variable recharge and evapotranspiration potentials, and highly complex patterns of water movement. Two primary spatiotemporal scales were examined to create a holistic, variable-scale conceptual model of groundwater movement: the large scale (e.g., glacial landforms, regional topography, decadal climate cycles) and the small scale (e.g., individual landcover, local hummocks, annual moisture deficits). Water table behaviour, evapotranspiration rates, and runoff were controlled by a hierarchy of interactions between hydrological processes occurring at different spatiotemporal scales; however, the specific order of controls depends on the hydrogeological setting. The case studies, supported by empirical and numerical modelling, demonstrate that smaller-scale heterogeneities in geology and recharge can dominate over topographic controls, particularly in areas with high conductivity or hummocky terrain, where the climate, geology, and topographic relief are similar. Many hydrogeological studies rely on surface topography as a first‐order control; however, with field observations and modelling, this conceptual framework demonstrates the need to consider the potential dominance of subsurface characteristics and processes, plus climate, especially in landscapes with low recharge and low relief.

Abstract

Urban karst terrains can experience geotechnical issues such as subsidence or collapse induced/accelerated by groundwater withdrawal and civil works. Sete Lagoas, Brazil, is notable for overexploiting a karst aquifer, resulting in drying lakes and geotechnical issues. This study aims to evaluate the progression of geotechnical risk areas from 1940 to 2020 and to simulate future scenarios until 2100. Historical hydraulic head data from the 1940s (when the first pumping well was installed) to the 2000s, a 3D geological model, and a karst-geotechnical risk matrix for defining risk levels were employed to develop a calibrated Feflow numerical model. The results indicate that, before the first well in 1942, the groundwater flow direction was primarily towards the northeast. In the 1980s, due to the concentration of pumping wells in the central area, a cone of depression emerged, causing the flow directions to converge towards the centre of the cone, forming a zone of influence (ZOI) of approximately 30 km². All 20 geotechnical events recorded between 1940 and 2020 have occurred in high or considerable-risk zones where limestone outcrops or is mantled in association with the ZOI. For future scenarios, if the current global well pumping rate (Q = 144,675 m³/d) from 2020 remains constant until 2100, the high and considerable geotechnical risk zones will continue to expand. A 40% decrease in the global rate (Q = 85,200 m³/d) is necessary to achieve a sustainable state, defined by reduced and stabilized risk zones.

Abstract

Water budget assessment and related recharge in karstified and fractured mountainous aquifers suffer a large uncertainty due to variable infiltration rates related to karst features. The KARMA project (karma-project.org), funded by the European Commission, has addressed this knowledge gap. The increase in human withdrawals and the effect of climate change can modify the recharge rate and, consequently, the spring discharge. The regional aquifer of Gran Sasso mountain, Central Italy, has been investigated by monitoring spring discharge isotope composition and calculating the inflow using a GIS approach on 100x100 m cells, considering local conditions, including karst features. The results for the 2000-2022 period highlight the preferential recharge area of the endorheic basin of Campo Imperatore (up to 75% of precipitation) and a mean infiltration of about 50% of rainfall. Different methods applied for recharge evaluation (Turc, Thornthwaite and APLIS) agree with a recharge rate close to 600 mm/year. This amount roughly corresponds to the spring discharge, evidencing: i) a “memory effect” in spring discharge, which is higher than previewed during dry years; ii) a variation in discharge due to rainy and drought year distribution, frequently recorded at springs with delay (1-2 years); iii) no significant trends of spring depletion since last 20 years; iv) the risk of lowering of snow contribution to recharge due to the temperature rise. The results provide updated information to the drinking water companies and the National Park Authority for sustainable management of the available groundwater resources.

Abstract

Due to technical, social, and economic limitations, integrated groundwater management presents a significant challenge in developing countries. The significance of this issue becomes even more pronounced in groundwater management, as this resource is often overlooked and undervalued by decision-makers due to its status as a “hidden resource,” despite the fact that it provides multiple ecosystem services. This study aims to establish the technical hydrogeological foundation in rural basins of central Bolivia through alternative, simplified, and cost-effective methods and tools. The study includes applying geophysical techniques, such as Electrical Resistivity Tomography, to determine the conceptual hydrogeological model of a micro-basin. In addition, a soil water balance approach was applied, characterizing 24 biophysical variables to identify groundwater recharge zones, while global circulation models provided a substitute for unreliable meteorological data. Furthermore, a participatory model was developed to identify recharge areas in upper basin areas within the framework of developing a municipal policy for their protection. The participatory model included local knowledge in all stages of methodology development, considering the characteristics of the local plant communities and the spatial distribution of local rainfall. The research findings have already contributed to resolving socio-environmental conflicts in Bolivia and establishing a foundation for effective water governance by empowering local rural communities. This study has demonstrated the feasibility of using alternative, simplified, and low-cost methods and tools to establish the technical hydrogeological basis, which can inform public policies to promote sustainable groundwater management in developing countries.

Abstract

Source protection area delineation has evolved over the last decades from fixed radius, analytical and numerical methods which do not consider uncertainty to more complex stochastic numerical approaches where uncertainties are often considered in a Monte Carlo framework. The representation of aquifer heterogeneity in these studies is typically based on a geostatistical representation of hydraulic properties. This presentation compares results from complex stochastic flow and transport simulations, simple homogeneous models, and existing analytical expressions. As a case study, we use the existing drinking supply wells in West Melton located Canterbury’s Selwyn District in New Zealand. Monte Carlo realisations are parameterised in MODFLOW6 so that the prior knowledge of the aquifer’s effective, large scale flow characteristics is honoured. Homogenous simulations are based on the same grid, using the aquifer’s effective properties to parameterise the numerical flow model. In both cases, conservative transport of pathogens is undertaken using Modpath7, using both forward and backward particle tracking. The numerical results are compared with analytical expressions from the international literature. Our results suggest that aquifer heterogeneity needs to be explicitly addressed in all cases. Homogeneous simulations almost certainly underestimate contamination risk and produce unrealistically small source protection areas. Parameterisation of the stochastic heterogeneous realisations also affects the size and extent of the source protection area, suggesting that these need to be carefully considered for practical applications.

Abstract

Mt. Fuji is the iconic centrepiece of a large, tectonically active volcanic watershed (100 km2 ), which plays a vital role in supplying safe drinking water to millions of people through groundwater and numerous freshwater springs. Situated at the top of the sole known continental triple-trench junction, the Fuji watershed experiences significant tectonic instability and pictures complex geology. Recently, the conventional understanding of Mt. Fuji catchment being conceptually simple, laminar groundwater flow system with three isolated aquifers was challenged: the combined use of noble gases, vanadium, and microbial eDNA as measured in different waters around Fuji revealed the presence of substantial deep groundwater water upwelling along Japan’s tectonically most active fault system, the Fujikawa Kako Fault Zone [1]. These findings call for even deeper investigations of the hydrogeology and the mixing dynamics within large-scale volcanic watersheds, typically characterized by complex geologies and extensive networks of fractures and faults. In our current study, we approach these questions by integrating existing and emerging methodologies, such as continuous, high-resolution monitoring of dissolved gases (GE-MIMS [2]) and microbes [3], eDNA, trace elements, and integrated 3-D hydrogeological modelling [4]. The collected tracer time series and hydraulic and seismic observations are used to develop an integrated SW-GW flow model of the Mt. Fuji watershed. Climate change projections will further inform predictive modelling and facilitate the design of resilient and sustainable water resource management strategies in tectonically active volcanic regions

Abstract

Groundwater represents a crucial source of drinking water in the Lille metropolitan area. Despite its importance, the resource is vulnerable to the potential evolution of land use: recharge, runoff and evapotranspiration processes in a soil-sealing context and changes in cultural practices. As a result, stakeholders emphasized the importance of exploring the influence of land use on groundwater to ensure sustainable resource management and enhance territorial planning. The 3D hydrodynamic model helped manage groundwater resources, but the (MARTHE code) has a significant limitation in that it does not consider the impact of land use evolution. We propose to investigate the contribution of a hydrological distributed numerical approach incorporating land cover data in groundwater modelling compared to a global approach at the scale of a peri-urban territory. To do so, we use the HELP code by considering the temporal and spatial evolution of land use and their associated characteristics, such as vegetation and soil properties, to detail recharge and runoff over more than 20 years that we incorporate into the initial groundwater model.

The two approaches yielded comparable global water balance results. However, at the local scale, the model accounting for land use showed significantly different hydric components. Choosing the appropriate model depends on the specific research question and spatial scale, and considering land use evolution is crucial for accurate urban planning impact assessments, especially at the district level.

Abstract

Sand mining in southern Africa is on the rise, fuelled largely by rapid urbanisation. This creates a range of societal and biophysical challenges and supports livelihoods in regions with high unemployment. Relevant scientific studies are scarce. This study explores the impacts of sand mining from ephemeral rivers on Botswana, South Africa and Mozambique communities through field visits, interviews, modelling, remote sensing and legislative analysis. What was expected to be a hydrogeology project focussing on water resources identified a broader range of issues that should be considered. Initial results uncovered a range of negative biophysical impacts, including alteration of hydrological regimes, which in turn affect groundwater recharge and exacerbate drought and flood risks, destruction of riparian vegetation, increased erosion, damage to infrastructure (including bridges and roads), reduced water quality, and the spread of invasive plant species. Equally important are the range of social impacts, such as drowning people and livestock, loss of agricultural land, increased traffic, dust, noise and crime. Complex governance arrangements influence these social and environmental challenges. The findings highlight the need to adopt an inter- and trans-disciplinary approach that considers linkages between human and natural systems. This approach is essential for finding sustainable solutions for the provision of construction materials that limit detrimental impacts on water resources, ecosystems and livelihoods. 

Abstract

Globally, rivers, lakes and groundwater face complex anthropogenic water quality alterations posing risks to human health, food security and ecosystems. The World Water Quality Alliance (WWQA) forms an open, global consortium, pooling expertise on water quality science and technology innovation and providing a participatory platform for water quality assessments and co-designing tailored and demand-driven services. It addresses priority topics relevant to water governance, scalable water solutions and emerging issues in water management. The African Use Cases provided an initial testbed that puts the quality of surface water and groundwater into the context of the local 2030 Agenda and its multiple linkages across the Sustainable Development Goals. Central to the initial Africa Use Cases was the integration of in-situ, remote sensing-based earth observation and modelling data to derive the best possible current state of water quality (baseline). Of the three African Use Cases, “Cape Town’s Major Aquifer Systems” focused mainly on groundwater quality in an urban environment. One of the success factors for the Cape Town Aquifer Use Case was the ability of the team to integrate the three different data types of the triangle approach on a sub-catchment scale. This required understanding the complex surface and groundwater systems and their interaction (flow paths and fluxes) in the urban environment. A robust stakeholder engagement process and the introduction of transformative art also drove the success of the Cape Town Use Case. The outcomes of this process will be presented and discussed in this presentation.

Abstract

Rising shallow groundwater temperatures are observed in many cities worldwide and are expected to increase further over the next century due to anthropogenic activities and climate change. The impact of groundwater temperature increase on groundwater quality is poorly understood. This study conducted two high-spatial-resolution campaigns in Vienna (Austria, autumn 2021/ spring 2022). At 150 wells, a comprehensive parameter set (e.g. major ions, nutrients, and water stable isotopes) was analyzed in groundwater collected, and at 812 wells, the water temperature was measured. Results are compared to available long-term data on groundwater chemistry (1991-2020). In theory, temperature triggers a cascade of effects, where, finally, the depletion of dissolved oxygen (DO) causes a switch to anaerobic microbial processes and a deterioration of water quality. No direct relation between DO and water temperature was observed between 10 and 20 °C. However, many wells delivered anoxic groundwater, including the one with the highest measured temperature (27 °C). The highest temperatures were consistently observed near potential heat sources (local scale), with a rapid decrease in temperature with increasing distance from these sources. Long-term data from particular high-temperature wells revealed decreased dissolved oxygen after sudden temperature changes of > 5 K. On a regional scale, it is observed that groundwater-surface water interactions and aquifer properties play a pivotal role in oxygen availability and redox conditions. In conclusion, high-spatial-resolution sampling combined with long-term data analysis is needed to determine the impact of temperature on water quality.

Abstract

A groundwater monitoring network surrounding a pumping well (such as a public water supply) allows for early contaminant detection and mitigation where possible contaminant source locations are often unknown. This numerical study investigates how the contaminant detection probability of a hypothetical sentinel-well monitoring network consisting of one to four monitoring wells is affected by aquifer spatial heterogeneity and dispersion characteristics, where the contaminant source location is randomized. This is achieved through a stochastic framework using a Monte Carlo approach. A single production well is considered, resulting in converging non-uniform flow close to the well. Optimal network arrangements are obtained by maximizing a weighted risk function that considers true and false positive detection rates, sampling frequency, early detection, and contaminant travel time uncertainty. Aquifer dispersivity is found to be the dominant parameter for the quantification of network performance. For the range of parameters considered, a single monitoring well screening the full aquifer thickness is expected to correctly and timely identify at least 12% of all incidents resulting in contaminants reaching the production well. Irrespective of network size and sampling frequency, more dispersive transport conditions result in higher detection rates. Increasing aquifer heterogeneity and decreasing spatial continuity also lead to higher detection rates, though these effects are diminished for networks of 3 or more wells. Earlier detection, critical for remedial action and supply safety, comes with a significant cost in terms of detection rate and should be carefully considered when a monitoring network is being designed.

Abstract

This research aims to evaluate the carbon storage function of a Mediterranean peatland in changing climate conditions. The scientific strategy relies on a seasonal geochemical survey sourcing the carbon origin by considering the hydrosphere, lithosphere, biosphere, and atmosphere. This unprecedented research on a Mediterranean peatland reveals the seasonality of dissolved carbon inputs from primary production, organic matter oxidation, and time-changing recharge components within the catchment (rainwater, river water, shallow groundwater, deep groundwater). Based on the mixing proportions of all recharge water components, the study applies a reverse end-member mixing analysis to define the theoretical peat water d13CDIC value and compare it to the measured ones. The model explains 65 % of the data, demonstrating the water flow influence on peatland carbon content. In 35% of the cases, peatland processes such as primary production and organic matter oxidation drive the peat water’s carbon content. Peat organic and inorganic properties, d13CTOC, and d13CCO2 data demonstrate the role of groundwater as a CO2 source and the dominance of in situ primary production that argues in favour of carbon storage within such Mediterranean peatland. This research proves the relevance of geochemistry and isotope hydrology tools to disentangle and rank peatland water and carbon processes within peatland hydro-ecosystems. Overall, it reveals the necessity to take into account the interactions between water and carbon cycle processes, with particular consideration for groundwater as a CO2 source at the peatland-atmosphere interface, to build better models for the future evolution of the global climate.